1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
|
/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
* Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
*
* Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <arch/pirq_routing.h>
/* Platform IRQs */
#define PIRQA 11
#define PIRQB 5
#define PIRQC 10
#define PIRQD 10
/* Map */
#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */
#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */
#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */
#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */
/* Link */
#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */
#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */
#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */
#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
0x00, /* Where the interrupt router lies (bus) */
(0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
0x800, /* IRQs devoted exclusively to PCI usage */
0x1078, /* Vendor */
0x2, /* Device */
0, /* Miniport data */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
{
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
{0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0},
{0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0},
}
};
unsigned long write_pirq_routing_table(unsigned long addr)
{
return copy_pirq_routing_table(addr);
}
|
