1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/x86/bist.h"
#include "cpu/x86/msr.h"
#include <cpu/amd/gx2def.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
#include "southbridge/amd/cs5535/cs5535_early_smbus.c"
#include "southbridge/amd/cs5535/cs5535_early_setup.c"
#include "northbridge/amd/gx2/raminit.h"
/* this has to be done on a per-mainboard basis, esp. if you don't have smbus */
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
msr_t msr;
/* 1. Initialize GLMC registers base on SPD values,
* Hard coded as XpressROM for now */
//print_debug("sdram_enable step 1\r\n");
msr = rdmsr(0x20000018);
msr.hi = 0x10076013;
msr.lo = 0x3400;
wrmsr(0x20000018, msr);
msr = rdmsr(0x20000019);
msr.hi = 0x18000008;
msr.lo = 0x696332a3;
wrmsr(0x20000019, msr);
}
#include "northbridge/amd/gx2/raminit.c"
#include "sdram/generic_sdram.c"
#include "northbridge/amd/gx2/pll_reset.c"
static void msr_init(void)
{
__builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02);
__builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
__builtin_wrmsr(0x10000026, 0x400fffc0, 0x2cfbc040);
__builtin_wrmsr(0x10000027, 0xfff00000, 0xff);
__builtin_wrmsr(0x10000028, 0x7bf00100, 0x2000000f);
__builtin_wrmsr(0x1000002c, 0xff030003, 0x20000000);
__builtin_wrmsr(0x10000080, 0x3, 0x0);
__builtin_wrmsr(0x40000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000);
__builtin_wrmsr(0x40000023, 0x400fffc0, 0x20000040);
__builtin_wrmsr(0x40000024, 0xff4ffffc, 0x200000ef);
__builtin_wrmsr(0x40000029, 0x7bf00100, 0x2000000f);
__builtin_wrmsr(0x4000002d, 0xff030003, 0x20000000);
__builtin_wrmsr(0x50002001, 0x27, 0x0);
__builtin_wrmsr(0x4c002001, 0x1, 0x0);
}
static void main(unsigned long bist)
{
static const struct mem_controller memctrl [] = {
{.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
};
msr_init();
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
cs5535_early_setup();
print_err("done cs5535 early\n");
pll_reset();
print_err("done pll_reset\n");
/* Halt if there was a built in self test failure */
//report_bist_failure(bist);
sdram_initialize(1, memctrl);
print_err("Done sdram_initialize\n");
/* Check all of memory */
ram_check(0x00000000, 640*1024);
}
|
