1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bootblock_common.h>
#include <device/pnp_def.h>
#include <device/pnp_ops.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <northbridge/intel/sandybridge/raminit.h>
#include <northbridge/intel/sandybridge/sandybridge.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <southbridge/intel/common/gpio.h>
#include <superio/winbond/common/winbond.h>
void mainboard_pch_lpc_setup(void)
{
/* Set COM3/COM1 decode ranges: 0x3e8/0x3f8 */
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0070);
/* Enable KBC on 0x06/0x64 (KBC),
* EC on 0x62/0x66 (MC),
* EC on 0x20c-0x20f (GAMEH),
* Super I/O on 0x2e/0x2f (CNF1),
* COM1/COM3 decode ranges. */
pci_write_config16(PCH_LPC_DEV, LPC_EN,
KBC_LPC_EN | MC_LPC_EN |
CNF1_LPC_EN | GAMEH_LPC_EN |
COMA_LPC_EN | COMB_LPC_EN);
}
void bootblock_mainboard_early_init(void)
{
int lvds_3v = 0; /* 0 (5V) or 1 (3V3) */
int dis_bl_inv = 1; /* backlight inversion: 1 = disabled, 0 = enabled */
const pnp_devfn_t dev = PNP_DEV(0x2e, 0x9);
pnp_enter_conf_state(dev);
pnp_write_config(dev, 0x29, 0x02); /* Pins 119, 120 are GPIO21, 20 */
pnp_write_config(dev, PNP_IDX_EN, 0x03); /* Enable GPIO2+3 */
pnp_write_config(dev, 0x2a, 0x01); /* Pins 62, 63, 65, 66 are
GPIO27, 26, 25, 24 */
pnp_write_config(dev, 0x2c, 0xc3); /* Pin 90 is GPIO32,
Pins 78~85 are UART B */
pnp_write_config(dev, 0x2d, 0x00); /* Pins 67, 68, 70~73, 75, 77 are
GPIO57~50 */
pnp_set_logical_device(dev);
/* Values can only be changed, when devices are enabled. */
pnp_write_config(dev, 0xe3, 0xdd); /* GPIO2 bits 1, 5 are output */
pnp_write_config(dev, 0xe4, (dis_bl_inv << 5) | (lvds_3v << 1)); /* GPIO2 bits 1, 5 */
/* Disable suspend LED during normal operation */
pnp_write_config(dev, PNP_IDX_MSC3, 0x40);
pnp_exit_conf_state(dev);
}
void mainboard_fill_pei_data(struct pei_data *pei_data)
{
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
/* enabled power USB oc pin */
{ 1, 0, 0 }, /* P0: lower left USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P1: upper left USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P2: lower right USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P3: upper right USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P4: lower USB 2.0 (OC0) */
{ 1, 0, 0 }, /* P5: upper USB 2.0 (OC0) */
{ 1, 0, 0 }, /* P6: front panel USB 2.0 (OC0) */
{ 1, 0, 0 }, /* P7: front panel USB 2.0 (OC0) */
{ 1, 0, 4 }, /* P8: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P9: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P10: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P11: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P12: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P13: internal USB 2.0 (OC4) */
};
void mainboard_early_init(int s3resume)
{
/* Enable PEG10 (1x16) */
pci_write_config32(PCI_DEV(0, 0, 0), DEVEN,
pci_read_config32(PCI_DEV(0, 0, 0), DEVEN) |
DEVEN_PEG10);
}
|
