1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <baseboard/variants.h>
#include <baseboard/gpio.h>
#include <gpio.h>
#include <soc/cnl_memcfg_init.h>
static const struct cnl_mb_cfg baseboard_memcfg_cfg = {
/* Access memory info through SMBUS. */
.spd[0] = {
.read_type = READ_SMBUS,
.spd_spec = {.spd_smbus_address = 0xA0}
},
.spd[1] = {
.read_type = READ_SMBUS,
.spd_spec = {.spd_smbus_address = 0xA2}
},
.spd[2] = {
.read_type = READ_SMBUS,
.spd_spec = {.spd_smbus_address = 0xA4}
},
.spd[3] = {
.read_type = READ_SMBUS,
.spd_spec = {.spd_smbus_address = 0xA6}
},
/*
* The dqs_map arrays map the ddr4 pins to the SoC pins
* for both channels.
*
* the index = pin number on ddr4 part
* the value = pin number on SoC
*/
.dqs_map[DDR_CH0] = {0, 1, 3, 2, 4, 5, 6, 7},
.dqs_map[DDR_CH1] = {1, 0, 4, 5, 2, 3, 6, 7},
/* Baseboard uses 121, 81 and 100 rcomp resistors */
.rcomp_resistor = {121, 81, 100},
/*
* Baseboard Rcomp target values.
*/
.rcomp_targets = {100, 40, 20, 20, 26},
/* Baseboard is an interleaved design */
.dq_pins_interleaved = 1,
/* Baseboard is using config 2 for vref_ca */
.vref_ca_config = 2,
/* Disable Early Command Training */
.ect = 0,
};
const struct cnl_mb_cfg *__weak variant_memcfg_config(void)
{
return &baseboard_memcfg_cfg;
}
|
