1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/pirq_routing.h>
#define IRQ_BITMAP_LINK0 0x0800 /* chipset's INTA# input should be routed to IRQ11 */
#define IRQ_BITMAP_LINK1 0x0400 /* chipset's INTB# input should be routed to IRQ10 */
#define IRQ_BITMAP_LINK2 0x0000 /* chipset's INTC# input should be routed to nothing (disabled) */
#define IRQ_BITMAP_LINK3 0x0000 /* chipset's INTD# input should be routed to nothing (disabled) */
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be a total of CONFIG_IRQ_SLOT_COUNT devices on the bus */
0x00, /* Where the interrupt router lies (bus) */
(0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
0xc00, /* IRQs devoted exclusively to PCI usage */
0x1078, /* Vendor */
0x2, /* Device */
0, /* Miniport data */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
0x57, /* u8 checksum. This has to be set to some
value that would give 0 after the sum of all
bytes for this structure (including checksum) */
.slots = {
[0] = {
.slot = 0x0, /* should be 0 when it is no real slot. My device is soldered */
.bus = 0x00,
.devfn = (0x13<<3)|0x0, /* 0x13 is my USB OHCI */
.irq = {
[0] = { /* <-- 0 means this is INTA# output from the device or slot */
.link = 0x01, /* 0x01 means its connected to INTA# input at chipset */
.bitmap = IRQ_BITMAP_LINK0
},
[1] = { /* <-- 1 means this is INTB# output from the device or slot */
.link = 0x02, /* 0x02 means its connected to INTB# input at chipset */
.bitmap = IRQ_BITMAP_LINK1
},
[2] = { /* <-- 2 means this is INTC# output from the device or slot */
.link = 0x03, /* 0x03 means its connected to INTC# input at chipset */
.bitmap = IRQ_BITMAP_LINK2
},
[3] = { /* <-- 3 means this is INTD# output from the device or slot */
.link = 0x04, /* 0x04 means its connected to INTD# input at chipset */
.bitmap = IRQ_BITMAP_LINK3
}
}
},
[1] = {
.slot = 0x0, /* means also "on board" */
.bus = 0x00,
.devfn = (0x0e<<3)|0x0, /* 0x0e is my Realtek Network device */
.irq = {
[0] = { /* <-- 0 means this is INTA# output from the device or slot */
.link = 0x02, /* 0x02 means its connected to INTB# input at chipset */
.bitmap = IRQ_BITMAP_LINK1
},
[1] = { /* <-- 1 means this is INTB# output from the device or slot */
.link = 0x03, /* 0x03 means its connected to INTC# input at chipset */
.bitmap = IRQ_BITMAP_LINK2
},
[2] = { /* <-- 2 means this is INTC# output from the device or slot */
.link = 0x04, /* 0x04 means its connected to INTD# input at chipset */
.bitmap = IRQ_BITMAP_LINK3
},
[3] = { /* <-- 3 means this is INTD# output from the device or slot */
.link = 0x01, /* 0x01 means its connected to INTA# input at chipset */
.bitmap = IRQ_BITMAP_LINK0
}
}
}
}
};
/**
* Copy the IRQ routing table to memory.
*
* @param addr Destination address (between 0xF0000...0x100000).
* @return The end address of the pirq routing table in memory.
*/
unsigned long write_pirq_routing_table(unsigned long addr)
{
return copy_pirq_routing_table(addr);
}
|
