1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
|
/* This file was generated by getpir.c, do not modify!
* (but if you do, please run checkpir on it to verify)
*
* Contains the IRQ Routing Table dumped directly from your
* memory, which BIOS sets up.
*
* Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx
*/
#ifdef GETPIR
#include "pirq_routing.h"
#else
#include <arch/pirq_routing.h>
#endif
static const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
0x0, /* Where the interrupt router lies (bus) */
(0x2<<3)|0x4,
0, /* IRQs devoted exclusively to PCI usage */
0, /* Vendor */
0, /* Device */
0, /* Miniport data */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
0x2a, /* u8 checksum. This has to be set to some
value that would give 0 after the sum of all
bytes for this structure (including checksum) */
{
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
{0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge
{0x00,(0x02<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 legacy southbridge
{0x00,(0x03<<3)|0x0, {{0x02, 0x0400}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 usb
{0x00,(0x04<<3)|0x0, {{0x18, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // VGA Contr
{0x00,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 pci/pci-x bridge
{0x01,(0x0e<<3)|0x0, {{0x08, 0x00a0}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom BCM5785 [HT1000] SATA
{0x01,(0x0d<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5785 [HT1000] PCI/PCI-X Bridge
//{0x02,(0x01<<3)|0x0, {{0x11, 0x08a8}, {0x12, 0x08a8}, {0x13, 0x08a8}, {0x14, 0x008a8}}, 0x2, 0x0},
{0x00,(0x06<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge
//{0x03,(0x00<<3)|0x0, {{0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x008a8}}, 0x1, 0x0},
{0x00,(0x07<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge
{0x00,(0x08<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge
{0x00,(0x09<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge
//{0x06,(0x00<<3)|0x0, {{0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x008a8}}, 0x2, 0x0},
{0x00,(0x0a<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge
//{0x07,(0x00<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0},
{0x08,(0x04<<3)|0x0, {{0x25, 0x08a8}, {0x25, 0x08a8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5715 Gigabit Ethernet
{0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge
//{0x10,(0x01<<3)|0x0, {{0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x08000}}, 0x1, 0x0},
{0x40,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // HTX slot
}
};
unsigned long write_pirq_routing_table(unsigned long addr)
{
return copy_pirq_routing_table(addr, &intel_irq_routing_table);
}
|
