1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/mmio.h>
#include <boot/coreboot_tables.h>
#include <console/console.h>
#include <device/device.h>
#include <device/i2c_simple.h>
#include <gpio.h>
#include <soc/display.h>
#include <soc/grf.h>
#include <soc/soc.h>
#include <soc/pmu.h>
#include <soc/clock.h>
#include <soc/rk808.h>
#include <soc/spi.h>
#include <soc/i2c.h>
#include <symbols.h>
#include <security/vboot/vboot_common.h>
#include "board.h"
static void configure_usb(void)
{
gpio_output(GPIO(0, B, 4), 1); /* USB2_PWR_EN */
}
static void configure_emmc(void)
{
write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA);
write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN);
write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD);
gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */
}
static void configure_codec(void)
{
write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */
i2c_init(2, 400*KHz); /* CODEC I2C */
write32(&rk3288_grf->iomux_i2s, IOMUX_I2S);
write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK);
rk808_configure_ldo(6, 1800); /* VCC18_CODEC */
/* AUDIO IO domain 1.8V voltage selection */
write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6));
rkclk_configure_i2s(12288000);
}
static void configure_3g(void)
{
/* Force 3G modem off to avoid confusing the EHCI host and
* causing problems during enumeration/init */
gpio_output(GPIO(5, C, 1), 1); /* 3G_SHUTDOWN */
gpio_output(GPIO(4, D, 2), 0); /* 3G_ON_OFF */
}
static void mainboard_init(struct device *dev)
{
gpio_output(GPIO_RESET, 0);
configure_usb();
configure_emmc();
configure_codec();
configure_3g();
/* No video. */
/* If recovery mode is detected, reduce frequency and voltage to reduce
* heat in case machine is left unattended. chrome-os-partner:41201. */
if (vboot_recovery_mode_enabled()) {
printk(BIOS_DEBUG, "Reducing APLL freq for recovery mode.\n");
rkclk_configure_cpu(APLL_600_MHZ);
rk808_configure_buck(1, 900);
}
}
static void mainboard_enable(struct device *dev)
{
dev->ops->init = &mainboard_init;
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
void lb_board(struct lb_header *header)
{
struct lb_range *dma;
dma = (struct lb_range *)lb_new_record(header);
dma->tag = LB_TAG_DMA;
dma->size = sizeof(*dma);
dma->range_start = (uintptr_t)_dma_coherent;
dma->range_size = REGION_SIZE(dma_coherent);
}
void mainboard_power_on_backlight(void)
{
}
|
