1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bootmode.h>
#include <types.h>
#include <console/console.h>
#include <ec/quanta/it8518/ec.h>
#include <device/device.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <southbridge/intel/common/pmbase.h>
#include "ec.h"
void stout_ec_init(void)
{
printk(BIOS_DEBUG,"%s: EC FW version %x%x\n", __func__,
ec_read(EC_FW_VER), ec_read(EC_FW_VER + 1));
/*
* Important: get_recovery_mode_switch() must be called in EC init.
*/
get_recovery_mode_switch();
/* Unmute */
ec_kbc_write_cmd(EC_KBD_CMD_UNMUTE);
/*
* Set USB Power off in S3 (enabled in S3 path if requested in gnvs)
* Bit0 of 0x0D/Bit0 of 0x26
* 0/0 All USB port off
* 1/0 USB on, all USB port didn't support wake up
* 0/1 USB on, yellow port support wake up charge, but may not support
* charge smart phone.
* 1/1 USB on, yellow port in AUTO mode and didn't support wake up system.
*/
ec_write(EC_PERIPH_CNTL_3, ec_read(EC_PERIPH_CNTL_3) & 0xE);
ec_write(EC_USB_S3_EN, ec_read(EC_USB_S3_EN) & 0xE);
// TODO: Power Limit Setting
}
void stout_ec_finalize_smm(void)
{
u8 ec_reg, critical_shutdown = 0;
/*
* Check EC for error conditions.
*/
/* Fan Error : Peripheral Status 3 (0x35) bit 4 */
ec_reg = ec_read(EC_PERIPH_STAT_3);
if (ec_reg & 0x8) {
printk(BIOS_ERR, " EC Fan Error\n");
critical_shutdown = 1;
}
/* Thermal Device Error : Peripheral Status 3 (0x35) bit 8 */
if (ec_reg & 0x80) {
printk(BIOS_ERR, " EC Thermal Device Error\n");
critical_shutdown = 1;
}
/* Critical Battery Error */
ec_reg = ec_read(EC_MBAT_STATUS);
if ((ec_reg & 0xCF) == 0xC0) {
printk(BIOS_ERR, " EC Critical Battery Error\n");
critical_shutdown = 1;
}
if ((ec_reg & 0x8F) == 0x8F) {
printk(BIOS_ERR, " EC Read Battery Error\n");
}
if (critical_shutdown) {
printk(BIOS_ERR, "EC critical_shutdown");
/* Go to S5 */
write_pmbase32(PM1_CNT, read_pmbase32(PM1_CNT) | (0xf << 10));
}
}
|