1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
|
/*
* This file is part of the coreboot project.
*
* Copyright 2015 MediaTek Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/cache.h>
#include <arch/io.h>
#include <boardid.h>
#include <boot/coreboot_tables.h>
#include <delay.h>
#include <device/device.h>
#include <gpio.h>
#include <soc/bl31_plat_params.h>
#include <soc/mt6391.h>
#include <soc/mtcmos.h>
#include <soc/pinmux.h>
#include <soc/pll.h>
#include <soc/usb.h>
static void register_da9212_to_bl31(void)
{
#if IS_ENABLED(CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE)
static struct bl31_da9212_param param_da9212 = {
.h = {
.type = PARAM_CLUSTER1_DA9212,
},
.i2c_bus = 1,
.ic_en = {
.type = PARAM_GPIO_SOC,
.polarity = PARAM_GPIO_ACTIVE_HIGH,
.index = PAD_UCTS2,
},
.en_a = {
.type = PARAM_GPIO_MT6391,
.polarity = PARAM_GPIO_ACTIVE_HIGH,
.index = MT6391_KP_ROW4,
},
.en_b = {
.type = PARAM_GPIO_NONE,
},
};
register_bl31_param(¶m_da9212.h);
#endif
}
static void register_mt6311_to_bl31(void)
{
#if IS_ENABLED(CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE)
static struct bl31_mt6311_param param_mt6311 = {
.h = {
.type = PARAM_CLUSTER1_MT6311,
},
.i2c_bus = 1,
};
register_bl31_param(¶m_mt6311.h);
#endif
}
static void configure_bl31(void)
{
switch (board_id()) {
case 2:
register_da9212_to_bl31();
break;
default:
/* rev-3 and rev-4 use mt6311 as external buck */
register_mt6311_to_bl31();
break;
}
}
static void configure_audio(void)
{
mtcmos_audio_power_on();
/* regulator for codecs */
switch (board_id()) {
case 0:
/* vgp1 set to 1.22V */
mt6391_configure_ldo(LDO_VCAMD, LDO_1P22);
/* vgp4 set to 1.8V */
mt6391_configure_ldo(LDO_VGP4, LDO_1P8);
break;
default:
/* board from Rev1 */
/* vgp1 set to 1.8V */
mt6391_configure_ldo(LDO_VCAMD, LDO_1P8);
/* delay 1ms for realtek's power sequence request */
mdelay(1);
/* vcama set to 1.8V */
mt6391_configure_ldo(LDO_VCAMA, LDO_1P8);
break;
}
/* reset ALC5676 */
gpio_output(PAD_LCM_RST, 1);
/* SoC I2S */
gpio_set_mode(PAD_I2S0_LRCK, PAD_I2S0_LRCK_FUNC_I2S1_WS);
gpio_set_mode(PAD_I2S0_BCK, PAD_I2S0_BCK_FUNC_I2S1_BCK);
gpio_set_mode(PAD_I2S0_MCK, PAD_I2S0_MCK_FUNC_I2S1_MCK);
gpio_set_mode(PAD_I2S0_DATA0, PAD_I2S0_DATA0_FUNC_I2S1_DO_1);
gpio_set_mode(PAD_I2S0_DATA1, PAD_I2S0_DATA1_FUNC_I2S2_DI_2);
/* codec ext MCLK ON */
mt6391_gpio_output(MT6391_KP_COL4, 1);
mt6391_gpio_output(MT6391_KP_COL5, 1);
/* set I2S clock to 48KHz */
mt_pll_set_aud_div(48 * KHz);
}
static void configure_usb(void)
{
setup_usb_host();
if (board_id() > 3)
gpio_output(PAD_CM2MCLK, 1);
}
/* Setup backlight control pins as output pin and power-off by default */
static void configure_backlight(void)
{
switch (board_id()) {
case 0:
gpio_output(PAD_DISP_PWM0, 0); /* DISP_PWM0 */
mt6391_gpio_output(MT6391_KP_ROW3, 0); /* PANEL_POWER_EN_6397 */
break;
case 1:
case 2:
gpio_output(PAD_DISP_PWM0, 0); /* DISP_PWM0 */
gpio_output(PAD_PCM_TX, 0); /* PANEL_POWER_EN */
break;
case 3:
gpio_output(PAD_UCTS2, 0); /* PANEL_LCD_POWER_EN */
gpio_output(PAD_DISP_PWM0, 0); /* DISP_PWM0 */
gpio_output(PAD_PCM_TX, 0); /* PANEL_POWER_EN */
break;
case 4:
default:
gpio_output(PAD_SRCLKENAI, 0); /* PANEL_LCD_POWER_EN */
gpio_output(PAD_DISP_PWM0, 0); /* DISP_PWM0 */
gpio_output(PAD_PCM_TX, 0); /* PANEL_POWER_EN */
break;
}
}
static void mainboard_init(device_t dev)
{
/* TP_SHIFT_EN: Enables the level shifter for I2C bus 4 (TPAD), which
* also contains the PS8640 eDP brige and the USB hub.
*/
mt6391_gpio_output(MT6391_KP_ROW2, 1);
/* Config SD card detection pin */
gpio_input(PAD_EINT1); /* SD_DET */
configure_audio();
configure_backlight();
configure_usb();
configure_bl31();
}
static void mainboard_enable(device_t dev)
{
dev->ops->init = &mainboard_init;
}
struct chip_operations mainboard_ops = {
.name = "oak",
.enable_dev = mainboard_enable,
};
|
