blob: bf6c7f3bb3feedb7f94eee1330ba3bf0c57dcf5f (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
##
## This file is part of the coreboot project.
##
## Copyright 2014 Google Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
chip soc/nvidia/tegra124
device cpu_cluster 0 on end
# N.B. We ae not using the device tree in an effective way.
# We need to change this in future such that the on-soc
# devices are 'chips', which will allow us to go at them
# in parallel. This is even easier on the ARM SOCs since there
# are no single-access resources such as the infamous
# cf8/cfc registers found on PCs.
register "display_controller" = "TEGRA_ARM_DISPLAYA"
register "xres" = "1366"
register "yres" = "768"
# bits per pixel and color depth
register "framebuffer_bits_per_pixel" = "16"
register "color_depth" = "6"
# "6" is defined as COLOR_DEPTH_B5G6R5 in dc_reg.h
register "panel_bits_per_pixel" = "18"
register "cache_policy" = "DCACHE_WRITETHROUGH"
# With some help from the mainbaord designer
register "backlight_en_gpio" = "GPIO(H2)"
register "lvds_shutdown_gpio" = "0"
register "backlight_vdd_gpio" = "GPIO(P2)"
register "panel_vdd_gpio" = "0"
register "pwm" = "1"
# various panel delay time
register "vdd_delay_ms" = "200"
register "vdd_to_hpd_delay_ms" = "200"
register "hpd_unplug_min_us" = "2000"
register "hpd_plug_min_us" = "250"
register "hpd_irq_min_us" = "250"
# How to compute these: xrandr --verbose will give you this:
#Detailed mode: Clock 285.250 MHz, 272 mm x 181 mm
# 2560 2608 2640 2720 hborder 0
# 1700 1703 1713 1749 vborder 0
#Then you can compute your values:
#H front porch = 2608 - 2560 = 48
#H sync = 2640 - 2608 = 32
#H back porch = 2720 - 2640 = 80
#V front porch = 1703 - 1700 = 3
#V sync = 1713 - 1703 = 10
#V back porch = 1749 - 1713 = 36
#href_to_sync and vref_to_sync are from the vendor
#this is just an example for a Pixel panel; other panels differ.
# Here is a peppy panel:
# 1366x768 (0x45) 76.4MHz -HSync -VSync *current +preferred
# h: width 1366 start 1502 end 1532 total 1592
# v: height 768 start 776 end 788 total 800
register "href_to_sync" = "68"
register "hfront_porch" = "136"
register "hsync_width" = "30"
register "hback_porch" = "60"
register "vref_to_sync" = "4"
register "vfront_porch" = "8"
register "vsync_width" = "12"
register "vback_porch" = "12"
# we *know* the pixel clock for this system.
# 1592 x 800 x 60Hz = 76416000
register "pixel_clock" = "76416000"
register "pll_div" = "2"
# use plld_out0 (ie, plld/2) as clock source
# plld -> plld_out0 -> pclk
# plld = plld_out0 * 2 = (pclk * pll_div) * 2
# = 305664000Hz
# link configurations
register "lane_count" = "1"
register "enhanced_framing" = "1"
register "link_bw" = "10"
# "10" is defined as SOR_LINK_SPEED_G2_7 in sor.h
register "drive_current" = "0x13131313"
register "preemphasis" = "0x00000000"
register "postcursor" = "0"
end
|
