1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
|
# SPDX-License-Identifier: GPL-2.0-or-later
chip soc/amd/cezanne
# eSPI Configuration
register "common_config.espi_config" = "{
.std_io_decode_bitmap = ESPI_DECODE_IO_0x80_EN | ESPI_DECODE_IO_0X60_0X64_EN,
.generic_io_range[0] = {
.base = 0x62,
/*
* Only 0x62 and 0x66 are required. But, this is not supported by
* standard IO decodes and there are only 4 generic I/O windows
* available. Hence, open a window from 0x62-0x67.
*/
.size = 5,
},
.generic_io_range[1] = {
.base = 0x800, /* EC_HOST_CMD_REGION0 */
.size = 256, /* EC_HOST_CMD_REGION_SIZE * 2 */
},
.generic_io_range[2] = {
.base = 0x900, /* EC_LPC_ADDR_MEMMAP */
.size = 255, /* EC_MEMMAP_SIZE */
},
.generic_io_range[3] = {
.base = 0x200, /* EC_LPC_ADDR_HOST_DATA */
.size = 8, /* 0x200 - 0x207 */
},
.io_mode = ESPI_IO_MODE_QUAD,
.op_freq_mhz = ESPI_OP_FREQ_33_MHZ,
.crc_check_enable = 1,
.dedicated_alert_pin = 1,
.periph_ch_en = 1,
.vw_ch_en = 1,
.oob_ch_en = 0,
.flash_ch_en = 0,
.vw_irq_polarity = ESPI_VW_IRQ_LEVEL_HIGH(1) | ESPI_VW_IRQ_LEVEL_HIGH(12),
}"
device domain 0 on
device ref gpp_bridge_0 on end # WLAN
device ref gpp_bridge_1 on end # SD
device ref gpp_bridge_2 on end # LAN
device ref gpp_bridge_3 on end # NVMe
device ref gpp_bridge_a on # Internal GPP Bridge 0 to Bus A
device ref gfx on end # Internal GPU (GFX)
device ref xhci_0 on # USB 3.1 (USB0)
chip drivers/usb/acpi
device ref xhci_0_root_hub on
chip drivers/usb/acpi
register "desc" = ""Rear Type-C Port""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(1, 1)"
device ref usb3_port0 on end
end
chip drivers/usb/acpi
register "desc" = ""Front Type-A Port""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(1, 2)"
device ref usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""Rear Type-C Port""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(1, 1)"
device ref usb2_port0 on end
end
chip drivers/usb/acpi
register "desc" = ""Front Type-A Port""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(1, 2)"
device ref usb2_port1 on end
end
end
end
end
device ref xhci_1 on # USB 3.1 (USB1)
chip drivers/usb/acpi
device ref xhci_1_root_hub on
chip drivers/usb/acpi
register "desc" = ""Front Type-C Port""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(2, 2)"
device ref usb3_port4 on end
end
chip drivers/usb/acpi
register "desc" = ""USB HUB""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(2, 1)"
device ref usb3_port5 on end
end
chip drivers/usb/acpi
register "desc" = ""Front Type-C Port""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(2, 2)"
device ref usb2_port4 on end
end
chip drivers/usb/acpi
register "desc" = ""USB HUB""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(2, 1)"
device ref usb2_port5 on end
end
chip drivers/usb/acpi
register "desc" = ""Bluetooth""
register "type" = "UPC_TYPE_INTERNAL"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_132)"
device ref usb2_port6 on end
end
end
end
end
end
device ref lpc_bridge on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end
end # domain
end # chip soc/amd/cezanne
|
