blob: e8098b96ac3b7b6db12f0c6b9adcec0035635eb4 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
#include <baseboard/variants.h>
#include <chip.h>
#include <delay.h>
#include <device/device.h>
#include <ec/google/chromeec/ec.h>
#include <gpio.h>
#include <timer.h>
#define GPIO_HDMI_HPD GPP_E13
#define GPIO_DP_HPD GPP_E14
/* TODO: This can be moved to common directory */
static void wait_for_hpd(gpio_t gpio, long timeout)
{
struct stopwatch sw;
printk(BIOS_INFO, "Waiting for HPD\n");
stopwatch_init_msecs_expire(&sw, timeout);
while (!gpio_get(gpio)) {
if (stopwatch_expired(&sw)) {
printk(BIOS_WARNING,
"HPD not ready after %ldms. Abort.\n", timeout);
return;
}
mdelay(200);
}
printk(BIOS_INFO, "HPD ready after %lu ms\n",
stopwatch_duration_msecs(&sw));
}
void variant_ramstage_init(void)
{
static const long display_timeout_ms = 3000;
/* This is reconfigured back to whatever FSP-S expects by
gpio_configure_pads. */
gpio_input(GPIO_HDMI_HPD);
gpio_input(GPIO_DP_HPD);
if (display_init_required()
&& !gpio_get(GPIO_HDMI_HPD)
&& !gpio_get(GPIO_DP_HPD)) {
/* This has to be done before FSP-S runs. */
if (google_chromeec_wait_for_displayport(display_timeout_ms))
wait_for_hpd(GPIO_DP_HPD, display_timeout_ms);
}
}
/*
* For type-C chargers, set PL2 to 90% of max power to account for
* cable loss and FET Rdson loss in the path from the source.
*/
#define SET_PSYSPL2(w) (9 * (w) / 10)
#define PUFF_PL2 (35)
#define PUFF_PSYSPL2 (58)
#define PUFF_MAX_TIME_WINDOW 6
#define PUFF_MIN_DUTYCYCLE 4
/*
* mainboard_set_power_limits
*
* Set Pl2 and SysPl2 values based on detected charger.
* Values are defined below but we use U22 value for all SKUs for now.
* definitions:
* x = no value entered. Use default value in parenthesis.
* will set 0 to anything that shouldn't be set.
* n = max value of power adapter.
* +-------------+-----+---------+-----------+-------+
* | sku_id | PL2 | PsysPL2 | PsysPL3 | PL4 |
* +-------------+-----+---------+-----------+-------+
* | i7 U42 | 51 | 81 | x(.85PL4) | x(82) |
* | celeron U22 | 35 | 58 | x(.85PL4) | x(51) |
* +-------------+-----+---------+-----------+-------+
* For USB C charger:
* +-------------+-----+---------+---------+-------+
* | Max Power(W)| PL2 | PsysPL2 | PsysPL3 | PL4 |
* +-------------+-----+---------+---------+-------+
* | 60 (U42) | 44 | 54 | 54 | 54 |
* | 60 (U22) | 29 | 54 | 54 | x(43) |
* | n (U42) | 44 | .9n | .9n | .9n |
* | n (U22) | 29 | .9n | .9n | x(43) |
* +-------------+-----+---------+---------+-------+
*/
static void mainboard_set_power_limits(config_t *conf)
{
enum usb_chg_type type;
u32 watts;
u32 psyspl2 = PUFF_PSYSPL2; // default barrel jack value for U22
int rv = google_chromeec_get_usb_pd_power_info(&type, &watts);
/* use SoC default value for PsysPL3 and PL4 unless we're on USB-PD*/
conf->tdp_psyspl3 = 0;
conf->tdp_pl4 = 0;
if (rv == 0 && type == USB_CHG_TYPE_PD) {
/* Detected USB-PD. Base on max value of adapter */
psyspl2 = watts;
conf->tdp_psyspl3 = SET_PSYSPL2(psyspl2);
/* set max possible time window */
conf->tdp_psyspl3_time = PUFF_MAX_TIME_WINDOW;
/* set minimum duty cycle */
conf->tdp_psyspl3_dutycycle = PUFF_MIN_DUTYCYCLE;
conf->tdp_pl4 = SET_PSYSPL2(psyspl2);
}
conf->tdp_pl2_override = PUFF_PL2;
/* set psyspl2 to 90% of max adapter power */
conf->tdp_psyspl2 = SET_PSYSPL2(psyspl2);
}
void variant_mainboard_enable(struct device *dev)
{
config_t *conf = config_of_soc();
mainboard_set_power_limits(conf);
}
|
