1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <baseboard/gpio.h>
#include <baseboard/variants.h>
#include <commonlib/helpers.h>
static const struct pad_config gpio_table[] = {
/* A0 : SAR0_INT_ODL */
PAD_CFG_GPI_INT(GPP_A0, NONE, PLTRST, LEVEL),
/* A6 : SAR1_INT_ODL */
PAD_CFG_GPI_INT(GPP_A6, NONE, PLTRST, LEVEL),
/* A8 : PEN_GARAGE_DET_L (wake) */
PAD_CFG_GPI_SCI(GPP_A8, NONE, DEEP, EDGE_SINGLE, NONE),
/* A10 : FPMCU_PCH_BOOT1 */
PAD_CFG_GPO(GPP_A10, 0, DEEP),
/* A11 : PCH_SPI_FPMCU_CS_L */
PAD_CFG_NF(GPP_A11, NONE, DEEP, NF2),
/* A12 : FPMCU_RST_ODL */
PAD_CFG_GPO(GPP_A12, 0, DEEP),
/* C13 : EC_PCH_INT_L */
PAD_CFG_GPI_APIC(GPP_C13, UP_20K, PLTRST, LEVEL, INVERT),
/* C15 : WWAN_DPR_SAR_ODL
*
* TODO: Driver doesn't use this pin as of now. In case driver starts
* using this pin, expose this pin to driver.
*/
PAD_CFG_GPO(GPP_C15, 1, DEEP),
/* D9 : EN_PP3300_DX_TOUCHSCREEN */
PAD_CFG_GPO(GPP_D9, 1, DEEP),
/* D15 : TOUCHSCREEN_RST_L */
PAD_CFG_GPO(GPP_D15, 1, DEEP),
/* H3 : SPKR_PA_EN */
PAD_CFG_GPO(GPP_H3, 0, DEEP),
/* H22 : BOMACO_EN */
PAD_CFG_GPO(GPP_H22, 0, DEEP),
};
const struct pad_config *override_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(gpio_table);
return gpio_table;
}
/*
* GPIOs configured before ramstage
* Note: the Hatch platform's romstage will configure
* the MEM_STRAP_* (a.k.a GPIO_MEM_CONFIG_*) pins
* as inputs before it reads them, so they are not
* needed in this table.
*/
static const struct pad_config early_gpio_table[] = {
/* B15 : H1_SLAVE_SPI_CS_L */
PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
/* B16 : H1_SLAVE_SPI_CLK */
PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
/* B17 : H1_SLAVE_SPI_MISO_R */
PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
/* B18 : H1_SLAVE_SPI_MOSI_R */
PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
/* C8 : UART_PCH_RX_DEBUG_TX */
PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1),
/* C9 : UART_PCH_TX_DEBUG_RX */
PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1),
/* C14 : BT_DISABLE_L */
PAD_CFG_GPO(GPP_C14, 0, DEEP),
/* PCH_WP_OD */
PAD_CFG_GPI(GPP_C20, NONE, DEEP),
/* C21 : H1_PCH_INT_ODL */
PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
/* C22 : EC_IN_RW_OD */
PAD_CFG_GPI(GPP_C22, NONE, DEEP),
/* C23 : WLAN_PE_RST# */
PAD_CFG_GPO(GPP_C23, 1, DEEP),
/* E1 : M2_SSD_PEDET */
PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),
/* E5 : SATA_DEVSLP1 */
PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1),
/* F2 : MEM_CH_SEL */
PAD_CFG_GPI(GPP_F2, NONE, PLTRST),
};
const struct pad_config *variant_early_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(early_gpio_table);
return early_gpio_table;
}
/* GPIOs needed to be set in romstage. */
static const struct pad_config romstage_gpio_table[] = {
/* Enable touchscreen, hold in reset */
/* D9 : EN_PP3300_DX_TOUCHSCREEN */
PAD_CFG_GPO(GPP_D9, 1, DEEP),
/* D15 : TOUCHSCREEN_RST_L */
PAD_CFG_GPO(GPP_D15, 0, DEEP),
};
const struct pad_config *variant_romstage_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(romstage_gpio_table);
return romstage_gpio_table;
}
|
