1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <acpi/acpi.h>
#include <baseboard/gpio.h>
#include <baseboard/variants.h>
#include <commonlib/helpers.h>
static const struct pad_config gpio_table[] = {
/* A11 : PCH_SPI_FPMCU_CS_L */
PAD_CFG_NF(GPP_A11, NONE, DEEP, NF2),
/* A12 : FPMCU_RST_ODL */
PAD_CFG_GPO(GPP_A12, 0, DEEP),
/* C12 : FPMCU_PCH_BOOT1 */
PAD_CFG_GPO(GPP_C12, 0, DEEP),
/* C15 : WWAN_DPR_SAR_ODL
*
* TODO: Driver doesn't use this pin as of now. In case driver starts
* using this pin, expose this pin to driver.
*/
PAD_CFG_GPO(GPP_C15, 1, DEEP),
/* E0 : View Angle Management */
PAD_CFG_GPO(GPP_E0, 0, DEEP),
/* F3 : MEM_STRAP_3 */
PAD_CFG_GPI(GPP_F3, NONE, PLTRST),
/* F10 : MEM_STRAP_2 */
PAD_CFG_GPI(GPP_F10, NONE, PLTRST),
/* F11 : EMMC_CMD ==> NC */
PAD_NC(GPP_F11, NONE),
/* F12 : EMMC_DATA0 ==> NC */
PAD_NC(GPP_F12, NONE),
/* F13 : EMMC_DATA1 ==> NC */
PAD_NC(GPP_F13, NONE),
/* F14 : EMMC_DATA2 ==> NC */
PAD_NC(GPP_F14, NONE),
/* F15 : EMMC_DATA3 ==> NC */
PAD_NC(GPP_F15, NONE),
/* F16 : EMMC_DATA4 ==> NC */
PAD_NC(GPP_F16, NONE),
/* F17 : EMMC_DATA5 ==> NC */
PAD_NC(GPP_F17, NONE),
/* F18 : EMMC_DATA6 ==> NC */
PAD_NC(GPP_F18, NONE),
/* F19 : EMMC_DATA7 ==> NC */
PAD_NC(GPP_F19, NONE),
/* F20 : EMMC_RCLK ==> NC */
PAD_NC(GPP_F20, NONE),
/* F21 : EMMC_CLK ==> NC */
PAD_NC(GPP_F21, NONE),
/* F22 : EMMC_RESET# ==> NC */
PAD_NC(GPP_F22, NONE),
/* H3 : SPKR_PA_EN */
PAD_CFG_GPO(GPP_H3, 0, DEEP),
/* H19 : MEM_STRAP_0 */
PAD_CFG_GPI(GPP_H19, NONE, PLTRST),
/* H22 : MEM_STRAP_1 */
PAD_CFG_GPI(GPP_H22, NONE, PLTRST),
};
const struct pad_config *override_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(gpio_table);
return gpio_table;
}
/*
* GPIOs configured before ramstage
* Note: the Hatch platform's romstage will configure
* the MEM_STRAP_* (a.k.a GPIO_MEM_CONFIG_*) pins
* as inputs before it reads them, so they are not
* needed in this table.
*/
static const struct pad_config early_gpio_table[] = {
/* B15 : H1_SLAVE_SPI_CS_L */
PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
/* B16 : H1_SLAVE_SPI_CLK */
PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
/* B17 : H1_SLAVE_SPI_MISO_R */
PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
/* B18 : H1_SLAVE_SPI_MOSI_R */
PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
/* C14 : BT_DISABLE_L */
PAD_CFG_GPO(GPP_C14, 0, DEEP),
/* PCH_WP_OD */
PAD_CFG_GPI(GPP_C20, NONE, DEEP),
/* C21 : H1_PCH_INT_ODL */
PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
/* C23 : WLAN_PE_RST# */
PAD_CFG_GPO(GPP_C23, 1, DEEP),
/* E1 : M2_SSD_PEDET */
PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),
/* E5 : SATA_DEVSLP1 */
PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1),
/* F2 : MEM_CH_SEL */
PAD_CFG_GPI(GPP_F2, NONE, PLTRST),
};
const struct pad_config *variant_early_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(early_gpio_table);
return early_gpio_table;
}
/*
* Default GPIO settings before entering non-S5 sleep states.
* Configure A12: FPMCU_RST_ODL as GPO before entering sleep.
* This guarantees that A12's native3 function is disabled.
* See commit c41b0e8ea3b2714bf6d6d88a6b66c333c6919f07.
*/
static const struct pad_config default_sleep_gpio_table[] = {
PAD_CFG_GPO(GPP_A12, 1, DEEP), /* FPMCU_RST_ODL */
};
/*
* GPIO settings before entering S5, which are same as default_sleep_gpio_table
* but also, turn off FPMCU.
*/
static const struct pad_config s5_sleep_gpio_table[] = {
PAD_CFG_GPO(GPP_A12, 0, DEEP), /* FPMCU_RST_ODL */
PAD_CFG_GPO(GPP_C11, 0, DEEP), /* PCH_FP_PWR_EN */
};
const struct pad_config *variant_sleep_gpio_table(u8 slp_typ, size_t *num)
{
if (slp_typ == ACPI_S5) {
*num = ARRAY_SIZE(s5_sleep_gpio_table);
return s5_sleep_gpio_table;
}
*num = ARRAY_SIZE(default_sleep_gpio_table);
return default_sleep_gpio_table;
}
|
