1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <baseboard/variants.h>
#include <baseboard/gpio.h>
#include <boardid.h>
#include <gpio.h>
#include <soc/cnl_memcfg_init.h>
#include <string.h>
#include <variant/gpio.h>
static const struct cnl_mb_cfg baseboard_memcfg = {
/*
* The dqs_map arrays map the SoC pins to the lpddr3 pins
* for both channels.
*
* "The index of the array is CPU byte number, the values are DRAM byte
* numbers." - doc #573387
*
* the index = pin number on SoC
* the value = pin number on lpddr3 part
*/
.dqs_map[DDR_CH0] = {4, 7, 5, 6, 0, 3, 2, 1},
.dqs_map[DDR_CH1] = {0, 3, 2, 1, 4, 7, 6, 5},
.dq_map[DDR_CH0] = {
{0xf0, 0xf},
{0x0, 0xf},
{0xf0, 0xf},
{0xf0, 0x0},
{0xff, 0x0},
{0xff, 0x0}
},
.dq_map[DDR_CH1] = {
{0xf, 0xf0},
{0x0, 0xf0},
{0xf, 0xf0},
{0xf, 0x0},
{0xff, 0x0},
{0xff, 0x0}
},
/* Helios uses 200, 80.6 and 162 rcomp resistors */
.rcomp_resistor = {200, 81, 162},
/* Helios Rcomp target values */
.rcomp_targets = {100, 40, 40, 23, 40},
/* Set CaVref config to 0 for LPDDR3 */
.vref_ca_config = 0,
/* Disable Early Command Training */
.ect = 0,
};
void variant_memory_params(struct cnl_mb_cfg *bcfg)
{
memcpy(bcfg, &baseboard_memcfg, sizeof(baseboard_memcfg));
}
int variant_memory_sku(void)
{
const gpio_t spd_gpios[] = {
GPIO_MEM_CONFIG_0,
GPIO_MEM_CONFIG_1,
GPIO_MEM_CONFIG_2,
GPIO_MEM_CONFIG_3,
};
int val = gpio_base2_value(spd_gpios, ARRAY_SIZE(spd_gpios));
if ((board_id() != 0) && (board_id() != BOARD_ID_UNKNOWN))
return val;
/*
* For boards with id 0 or unknown, memory straps 3 and 4 are
* incorrectly stuffed in hardware. This is a workaround for these
* boards to override memory strap 3 to 0 and 4 to 1.
*/
switch (val) {
case 3:
val = 0;
break;
case 4:
val = 1;
break;
}
return val;
}
|
