1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <boardid.h>
#include <console/console.h>
#include <delay.h>
#include <device/i2c_simple.h>
#include <reset.h>
#include <stdint.h>
#include "pmic.h"
enum {
MAX77620_I2C_ADDR = 0x3c
};
struct max77620_init_reg {
u8 reg;
u8 val;
u8 delay;
};
static void pmic_write_reg(unsigned int bus, uint8_t reg, uint8_t val, int delay)
{
if (i2c_writeb(bus, MAX77620_I2C_ADDR, reg, val)) {
printk(BIOS_ERR, "%s: reg = 0x%02X, value = 0x%02X failed!\n",
__func__, reg, val);
/* Reset the board on any PMIC write error */
board_reset();
} else {
if (delay)
udelay(500);
}
}
void pmic_init(unsigned int bus)
{
/* Setup/Enable GPIO5 - VDD_CPU_REG_EN */
pmic_write_reg(bus, MAX77620_GPIO5_REG, 0x09, 1);
/* Setup/Enable GPIO1 - VDD_HDMI_5V0_BST_EN -- ??? */
pmic_write_reg(bus, MAX77620_GPIO1_REG, 0x09, 1);
/* GPIO 0,1,5,6,7 = GPIO, 2,3,4 = alt mode */
pmic_write_reg(bus, MAX77620_AME_GPIO, 0x1c, 1);
/* Disable SD1 Remote Sense, Set SD1 for LPDDR4 to 1.125v? */
pmic_write_reg(bus, MAX77620_CNFG2SD_REG, 0x04, 1);
pmic_write_reg(bus, MAX77620_SD1_REG, 0x2a, 1);
/* CNFG1_L2 = 0xF2 for 3.3v, enabled */
pmic_write_reg(bus, MAX77620_CNFG1_L2_REG, 0xf2, 1);
/* CNFG1_L1 = 0xCA for 1.05v, enabled */
pmic_write_reg(bus, MAX77620_CNFG1_L1_REG, 0xca, 1);
printk(BIOS_DEBUG, "PMIC init done\n");
}
|
