1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <boardid.h>
#include <cbfs.h>
#include <device/i2c_simple.h>
#include <edid.h>
#include <gpio.h>
#include <soc/ddp.h>
#include <soc/dsi.h>
#include <soc/gpio_common.h>
#include <soc/mtcmos.h>
#include "gpio.h"
#include "panel.h"
void aw37503_init(unsigned int bus)
{
i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x00, 0x14, 0x1F, 0);
i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x01, 0x14, 0x1F, 0);
i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x21, 0x4C, 0xFF, 0);
i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x03, 0x43, 0xFF, 0);
i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x21, 0x00, 0xFF, 0);
}
bool is_pmic_aw37503(unsigned int bus)
{
u8 vendor_id;
return (!i2c_read_field(bus, PMIC_AW37503_SLAVE,
0x04, &vendor_id, 0x0F, 0) && vendor_id == 0x01);
}
void backlight_control(void)
{
/* Set up backlight control pins as output pin and power-off by default */
gpio_output(GPIO_AP_EDP_BKLTEN, 0);
gpio_output(GPIO_BL_PWM_1V8, 0);
}
struct panel_description *get_active_panel(void)
{
/* Board-specific exceptions */
if (CONFIG(BOARD_GOOGLE_STEELIX) && board_id() < 2) /* Early builds use PS8640 */
return get_ps8640_description();
if (CONFIG(DRIVER_ANALOGIX_ANX7625))
return get_anx7625_description();
if (CONFIG(DRIVER_PARADE_PS8640))
return get_ps8640_description();
/* MIPI panels */
return get_panel_description();
}
|
