1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bl31.h>
#include <bootmode.h>
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <device/mmio.h>
#include <edid.h>
#include <framebuffer_info.h>
#include <gpio.h>
#include <soc/ddp.h>
#include <soc/dpm.h>
#include <soc/dptx.h>
#include <soc/gpio.h>
#include <soc/i2c.h>
#include <soc/msdc.h>
#include <soc/mtcmos.h>
#include <soc/spm.h>
#include <soc/usb.h>
#include "gpio.h"
#include <arm-trusted-firmware/include/export/plat/mediatek/common/plat_params_exp.h>
/* GPIO to schematics names */
#define GPIO_AP_EDP_BKLTEN GPIO(DGI_D5)
#define GPIO_BL_PWM_1V8 GPIO(DISP_PWM0)
#define GPIO_EDP_HPD_1V8 GPIO(GPIO_07)
#define GPIO_EN_PP3300_DISP_X GPIO(I2SO1_D2)
static void register_reset_to_bl31(void)
{
static struct bl_aux_param_gpio param_reset = {
.h = { .type = BL_AUX_PARAM_MTK_RESET_GPIO },
.gpio = { .polarity = ARM_TF_GPIO_LEVEL_HIGH },
};
param_reset.gpio.index = GPIO_RESET.id;
register_bl31_aux_param(¶m_reset.h);
}
/* Set up backlight control pins as output pin and power-off by default */
static void configure_panel_backlight(void)
{
gpio_output(GPIO_AP_EDP_BKLTEN, 0);
gpio_output(GPIO_BL_PWM_1V8, 0);
}
static void power_on_panel(void)
{
/* Default power sequence for most panels. */
gpio_set_pull(GPIO_EDP_HPD_1V8, GPIO_PULL_ENABLE, GPIO_PULL_UP);
gpio_set_mode(GPIO_EDP_HPD_1V8, 2);
gpio_output(GPIO_EN_PP3300_DISP_X, 1);
}
static bool configure_display(void)
{
struct edid edid;
struct fb_info *info;
const char *name;
printk(BIOS_INFO, "%s: Starting display initialization\n", __func__);
mtcmos_display_power_on();
mtcmos_protect_display_bus();
configure_panel_backlight();
power_on_panel();
mtk_ddp_init();
mdelay(200);
if (mtk_edp_init(&edid) < 0) {
printk(BIOS_ERR, "%s: Failed to initialize eDP\n", __func__);
return false;
}
name = edid.ascii_string;
if (name[0] == '\0')
name = "unknown name";
printk(BIOS_INFO, "%s: '%s %s' %dx%d@%dHz\n", __func__,
edid.manufacturer_name, name, edid.mode.ha, edid.mode.va,
edid.mode.refresh);
edid_set_framebuffer_bits_per_pixel(&edid, 32, 0);
mtk_ddp_mode_set(&edid);
info = fb_new_framebuffer_info_from_edid(&edid, (uintptr_t)0);
if (info)
fb_set_orientation(info, LB_FB_ORIENTATION_NORMAL);
return true;
}
static void mainboard_init(struct device *dev)
{
if (display_init_required())
configure_display();
else
printk(BIOS_INFO, "%s: Skipped display initialization\n", __func__);
mtk_msdc_configure_emmc(true);
mtk_msdc_configure_sdcard();
setup_usb_host();
/* for audio usage */
if (CONFIG(CHERRY_USE_RT1011))
mtk_i2c_bus_init(I2C2, I2C_SPEED_FAST);
if (dpm_init())
printk(BIOS_ERR, "dpm init failed, DVFS may not work\n");
if (spm_init())
printk(BIOS_ERR, "spm init failed, system suspend may not work\n");
register_reset_to_bl31();
}
static void mainboard_enable(struct device *dev)
{
dev->ops->init = &mainboard_init;
}
struct chip_operations mainboard_ops = {
.name = CONFIG_MAINBOARD_PART_NUMBER,
.enable_dev = mainboard_enable,
};
|
