1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <baseboard/gpio.h>
#include <baseboard/variants.h>
#include <commonlib/helpers.h>
#include <soc/gpio.h>
/* Pad configuration in ramstage */
static const struct pad_config override_gpio_table[] = {
/* A20 : DDSP_HPD2 ==> NC */
PAD_NC(GPP_A20, NONE),
/* E20 : DDP2_CTRLCLK ==> NC */
PAD_NC(GPP_E20, NONE),
/* E21 : DDP2_CTRLDATA ==> NC */
PAD_NC(GPP_E21, NONE),
/* F0 : CNV_BRI_DT ==> NC*/
PAD_NC(GPP_F0, NONE),
/* F1 : CNV_BRI_RSP ==> NC */
PAD_NC(GPP_F1, NONE),
/* F2 : CNV_RGI_DT ==> NC */
PAD_NC(GPP_F2, NONE),
/* F3 : CNV_RGI_RSP ==> NC */
PAD_NC(GPP_F3, NONE),
/* F4 : CNV_RF_RESET# ==> NC */
PAD_NC(GPP_F4, NONE),
/* F5 : CRF_XTAL_CLKREQ ==> NC */
PAD_NC(GPP_F5, NONE),
/* R6 : DMIC_CLK_A_1A ==> NC */
PAD_NC(GPP_R6, NONE),
/* R7 : DMIC_DATA_1A ==> NC */
PAD_NC(GPP_R7, NONE),
};
/* Early pad configuration in bootblock */
static const struct pad_config early_gpio_table[] = {
/* H12 : UART0_RTS# ==> SD_PERST_L */
PAD_CFG_GPO(GPP_H12, 0, DEEP),
/* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */
PAD_CFG_GPO(GPP_H20, 0, DEEP),
/* A13 : GPP_A13 ==> GSC_SOC_INT_ODL */
PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
/* E12 : THC0_SPI1_IO1 ==> SOC_WP_OD */
PAD_CFG_GPI_GPIO_DRIVER(GPP_E12, NONE, DEEP),
/* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */
PAD_CFG_GPI(GPP_F18, NONE, DEEP),
/* H4 : I2C0_SDA ==> SOC_I2C_GSC_SDA */
PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
/* H5 : I2C0_SCL ==> SOC_I2C_GSC_SCL */
PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
/* H10 : UART0_RXD ==> UART_SOC_RX_DBG_TX */
PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
/* H11 : UART0_TXD ==> UART_SOC_TX_DBG_RX */
PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
/* H13 : UART0_CTS# ==> EN_PP3300_SD_X */
PAD_CFG_GPO(GPP_H13, 1, DEEP),
};
static const struct pad_config romstage_gpio_table[] = {
/* Enable touchscreen, hold in reset */
/* C0 : SMBCLK ==> EN_PP3300_TCHSCR */
PAD_CFG_GPO(GPP_C0, 1, DEEP),
/* C1 : SMBDATA ==> USI_RST_L */
PAD_CFG_GPO(GPP_C1, 0, DEEP),
/* H12 : UART0_RTS# ==> SD_PERST_L */
PAD_CFG_GPO(GPP_H12, 1, DEEP),
/* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */
PAD_CFG_GPO(GPP_H20, 1, DEEP),
};
const struct pad_config *variant_gpio_override_table(size_t *num)
{
*num = ARRAY_SIZE(override_gpio_table);
return override_gpio_table;
}
const struct pad_config *variant_early_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(early_gpio_table);
return early_gpio_table;
}
const struct pad_config *variant_romstage_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(romstage_gpio_table);
return romstage_gpio_table;
}
|
