1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <baseboard/gpio.h>
#include <baseboard/variants.h>
#include <commonlib/helpers.h>
#include <soc/gpio.h>
#include <vendorcode/google/chromeos/chromeos.h>
/* Pad configuration in ramstage */
static const struct pad_config override_gpio_table[] = {
/* A6 : ESPI_ALERT1# ==> NC */
PAD_NC(GPP_A6, NONE),
/* A14 : USB_OC1# ==> NC */
PAD_NC(GPP_A14, NONE),
/* A15 : USB_OC2# ==> NC */
PAD_NC(GPP_A15, NONE),
/* A21 : DDPC_CTRCLK ==> NC */
PAD_NC(GPP_A21, NONE),
/* A22 : DDPC_CTRLDATA ==> NC */
PAD_NC(GPP_A22, NONE),
/* B3 : PROC_GP2 ==> eMMC_PERST_L */
PAD_CFG_GPO(GPP_B3, 1, DEEP),
/* D3 : ISH_GP3 ==> NC */
PAD_NC(GPP_D3, NONE),
/* D5 : SRCCLKREQ0# ==> SSD_CLKREQ_ODL */
PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1),
/* D6 : SRCCLKREQ1# ==> NC */
PAD_NC(GPP_D6, NONE),
/* D13 : ISH_UART0_RXD ==> NC */
PAD_NC(GPP_D13, NONE),
/* D14 : ISH_UART0_TXD ==> NC */
PAD_NC(GPP_D14, NONE),
/* E3 : PROC_GP0 ==> NC */
PAD_NC(GPP_E3, NONE),
/* E7 : PROC_GP1 ==> NC */
PAD_NC(GPP_E7, NONE),
/* E10 : THC0_SPI1_CS# ==> NC */
PAD_NC(GPP_E10, NONE),
/* E17 : THC0_SPI1_INT# ==> NC */
PAD_NC(GPP_E17, NONE),
/* E20 : USB_C1_LSX_SOC_TX ==> EN_PP3300_eMMC */
PAD_CFG_GPO(GPP_E20, 1, DEEP),
/* F19 : SRCCLKREQ6# ==> EMMC_CLKREQ_ODL */
PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
/* F20 : EXT_PWR_GATE# ==> NC */
PAD_NC(GPP_F20, NONE),
/* H19 : SRCCLKREQ4# ==> NC */
PAD_NC(GPP_H19, NONE),
/* H21 : IMGCLKOUT2 ==> NC */
PAD_NC(GPP_H21, NONE),
/* H22 : IMGCLKOUT3 ==> NC */
PAD_NC(GPP_H22, NONE),
/* S4 : SNDW2_CLK ==> NC */
PAD_NC(GPP_S4, NONE),
/* S5 : SNDW2_DATA ==> NC */
PAD_NC(GPP_S5, NONE),
/* S6 : SNDW3_CLK ==> NC */
PAD_NC(GPP_S6, NONE),
/* S7 : SNDW3_DATA ==> NC */
PAD_NC(GPP_S7, NONE),
/* T2 : GPP_T2 ==> eMMC_CFG */
PAD_CFG_GPI(GPP_T2, NONE, DEEP),
/* GPD11: LANPHYC ==> NC */
PAD_NC(GPD11, NONE),
};
/* Early pad configuration in bootblock */
static const struct pad_config early_gpio_table[] = {
/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
/* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2),
/* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2),
/*
* D1 : ISH_GP1 ==> FP_RST_ODL
* FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.
* To ensure proper power sequencing for the FPMCU device, reset signal is driven low
* early on in bootblock, followed by enabling of power. Reset signal is deasserted
* later on in ramstage. Since reset signal is asserted in bootblock, it results in
* FPMCU not working after a S3 resume. This is a known issue.
*/
PAD_CFG_GPO(GPP_D1, 0, DEEP),
/* D2 : ISH_GP2 ==> EN_FP_PWR */
PAD_CFG_GPO(GPP_D2, 1, DEEP),
/* E0 : SATAXPCIE0 ==> WWAN_PERST_L */
PAD_CFG_GPO(GPP_E0, 0, DEEP),
/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
PAD_CFG_GPI(GPP_E13, NONE, DEEP),
/* E16 : RSVD_TP ==> WWAN_RST_L */
PAD_CFG_GPO(GPP_E16, 0, DEEP),
/* E15 : RSVD_TP ==> PCH_WP_OD */
PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
/* H13 : I2C7_SCL ==> EN_PP3300_SD */
PAD_NC(GPP_H13, UP_20K),
};
const struct pad_config *variant_gpio_override_table(size_t *num)
{
*num = ARRAY_SIZE(override_gpio_table);
return override_gpio_table;
}
const struct pad_config *variant_early_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(early_gpio_table);
return early_gpio_table;
}
|
