1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bl31.h>
#include <bootmode.h>
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <device/mmio.h>
#include <drivers/analogix/anx7625/anx7625.h>
#include <edid.h>
#include <framebuffer_info.h>
#include <gpio.h>
#include <soc/ddp.h>
#include <soc/dpm.h>
#include <soc/dsi.h>
#include <soc/gpio.h>
#include <soc/gpio_common.h>
#include <soc/i2c.h>
#include <soc/msdc.h>
#include <soc/mtcmos.h>
#include <soc/regulator.h>
#include <soc/spm.h>
#include <soc/usb.h>
#include "gpio.h"
#include <arm-trusted-firmware/include/export/plat/mediatek/common/plat_params_exp.h>
#define MSDC0_BASE 0x11f60000
#define MSDC0_TOP_BASE 0x11f50000
#define MSDC0_DRV_MASK 0x3fffffff
#define MSDC1_DRV_MASK 0x3ffff000
#define MSDC0_DRV_VALUE 0x24924924
#define MSDC1_DRV_VALUE 0x1b6db000
#define MSDC1_GPIO_MODE0_BASE 0x10005360
#define MSDC1_GPIO_MODE0_MASK 0x77777000
#define MSDC1_GPIO_MODE0_VALUE 0x11111000
#define MSDC1_GPIO_MODE1_BASE 0x10005370
#define MSDC1_GPIO_MODE1_MASK 0x7
#define MSDC1_GPIO_MODE1_VALUE 0x1
/* GPIO names */
#define GPIO_EDPBRDG_INT_ODL GPIO(EINT6) /* 6 */
#define GPIO_EDPBRDG_PWREN GPIO(DSI_TE) /* 41 */
#define GPIO_EDPBRDG_RST_ODL GPIO(LCM_RST) /* 42 */
#define GPIO_EN_PP3300_EDP_DX GPIO(PERIPHERAL_EN1) /* 127 */
#define GPIO_EN_PP1800_EDPBRDG_DX GPIO(PERIPHERAL_EN2) /* 128 */
#define GPIO_EN_PP1000_EDPBRDG GPIO(PERIPHERAL_EN3) /* 129 */
#define GPIO_EN_PP3300_DISPLAY_DX GPIO(CAM_CLK3) /* 136 */
#define GPIO_AP_EDP_BKLTEN GPIO(KPROW1) /* 152 */
#define GPIO_BL_PWM_1V8 GPIO(DISP_PWM) /* 40 */
static void register_reset_to_bl31(void)
{
static struct bl_aux_param_gpio param_reset = {
.h = { .type = BL_AUX_PARAM_MTK_RESET_GPIO },
.gpio = { .polarity = ARM_TF_GPIO_LEVEL_HIGH },
};
param_reset.gpio.index = GPIO_RESET.id;
register_bl31_aux_param(¶m_reset.h);
}
/* Set up backlight control pins as output pin and power-off by default */
static void configure_backlight_and_bridge(void)
{
/* Disable backlight before turning on bridge */
gpio_output(GPIO_AP_EDP_BKLTEN, 0);
gpio_output(GPIO_BL_PWM_1V8, 0);
gpio_output(GPIO_EN_PP3300_DISPLAY_DX, 1);
/* Turn on bridge */
gpio_output(GPIO_EDPBRDG_RST_ODL, 0);
gpio_output(GPIO_EN_PP1000_EDPBRDG, 1);
gpio_output(GPIO_EN_PP1800_EDPBRDG_DX, 1);
gpio_output(GPIO_EN_PP3300_EDP_DX, 1);
mdelay(2);
gpio_output(GPIO_EDPBRDG_PWREN, 1);
mdelay(10);
gpio_output(GPIO_EDPBRDG_RST_ODL, 1);
}
static bool configure_display(void)
{
struct edid edid;
const u8 i2c_bus = 3;
printk(BIOS_INFO, "%s: Starting display init\n", __func__);
configure_backlight_and_bridge();
mtk_i2c_bus_init(i2c_bus);
if (anx7625_init(i2c_bus)) {
printk(BIOS_ERR, "%s: Can't init ANX7625 bridge\n", __func__);
return false;
}
if (anx7625_dp_get_edid(i2c_bus, &edid)) {
printk(BIOS_ERR, "%s: Can't get panel's edid\n", __func__);
return false;
}
if (anx7625_dp_start(i2c_bus, &edid) < 0) {
printk(BIOS_ERR, "%s: Can't start display via ANX7625\n", __func__);
return false;
}
const char *name = edid.ascii_string;
if (name[0] == '\0')
name = "unknown name";
printk(BIOS_INFO, "%s: '%s %s' %dx%d@%dHz\n", __func__,
edid.manufacturer_name, name, edid.mode.ha, edid.mode.va,
edid.mode.refresh);
mtcmos_display_power_on();
mtcmos_protect_display_bus();
edid_set_framebuffer_bits_per_pixel(&edid, 32, 0);
mtk_ddp_init();
u32 mipi_dsi_flags = (MIPI_DSI_MODE_VIDEO |
MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_MODE_LPM |
MIPI_DSI_MODE_EOT_PACKET);
if (mtk_dsi_init(mipi_dsi_flags, MIPI_DSI_FMT_RGB888, 4, &edid, NULL) < 0) {
printk(BIOS_ERR, "%s: Failed in DSI init\n", __func__);
return false;
}
mtk_ddp_mode_set(&edid);
fb_new_framebuffer_info_from_edid(&edid, (uintptr_t)0);
return true;
}
static void configure_emmc(void)
{
void *gpio_base = (void *)IOCFG_TL_BASE;
int i;
const gpio_t emmc_pu_pin[] = {
GPIO(MSDC0_DAT0), GPIO(MSDC0_DAT1),
GPIO(MSDC0_DAT2), GPIO(MSDC0_DAT3),
GPIO(MSDC0_DAT4), GPIO(MSDC0_DAT5),
GPIO(MSDC0_DAT6), GPIO(MSDC0_DAT7),
GPIO(MSDC0_CMD), GPIO(MSDC0_RSTB),
};
const gpio_t emmc_pd_pin[] = {
GPIO(MSDC0_DSL), GPIO(MSDC0_CLK),
};
for (i = 0; i < ARRAY_SIZE(emmc_pu_pin); i++)
gpio_set_pull(emmc_pu_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_UP);
for (i = 0; i < ARRAY_SIZE(emmc_pd_pin); i++)
gpio_set_pull(emmc_pd_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_DOWN);
/* set eMMC cmd/dat/clk/ds/rstb pins driving to 10mA */
clrsetbits32(gpio_base, MSDC0_DRV_MASK, MSDC0_DRV_VALUE);
mtk_emmc_early_init((void *)MSDC0_BASE, (void *)MSDC0_TOP_BASE);
}
static void configure_sdcard(void)
{
void *gpio_base = (void *)IOCFG_RM_BASE;
void *gpio_mode0_base = (void *)MSDC1_GPIO_MODE0_BASE;
void *gpio_mode1_base = (void *)MSDC1_GPIO_MODE1_BASE;
uint8_t enable = 1;
int i;
const gpio_t sdcard_pu_pin[] = {
GPIO(MSDC1_DAT0), GPIO(MSDC1_DAT1),
GPIO(MSDC1_DAT2), GPIO(MSDC1_DAT3),
GPIO(MSDC1_CMD),
};
const gpio_t sdcard_pd_pin[] = {
GPIO(MSDC1_CLK),
};
for (i = 0; i < ARRAY_SIZE(sdcard_pu_pin); i++)
gpio_set_pull(sdcard_pu_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_UP);
for (i = 0; i < ARRAY_SIZE(sdcard_pd_pin); i++)
gpio_set_pull(sdcard_pd_pin[i], GPIO_PULL_ENABLE, GPIO_PULL_DOWN);
/* set sdcard cmd/dat/clk pins driving to 8mA */
clrsetbits32(gpio_base, MSDC1_DRV_MASK, MSDC1_DRV_VALUE);
/* set sdcard dat2/dat0/dat3/cmd/clk pins to msdc1 mode */
clrsetbits32(gpio_mode0_base, MSDC1_GPIO_MODE0_MASK, MSDC1_GPIO_MODE0_VALUE);
/* set sdcard dat1 pin to msdc1 mode */
clrsetbits32(gpio_mode1_base, MSDC1_GPIO_MODE1_MASK, MSDC1_GPIO_MODE1_VALUE);
mainboard_enable_regulator(MTK_REGULATOR_VCC, enable);
mainboard_enable_regulator(MTK_REGULATOR_VCCQ, enable);
}
static void configure_audio(void)
{
/* Audio PWR */
mtcmos_audio_power_on();
/* SoC I2S */
gpio_set_mode(GPIO(I2S3_MCK), PAD_I2S3_MCK_FUNC_I2S3_MCK);
gpio_set_mode(GPIO(I2S3_BCK), PAD_I2S3_BCK_FUNC_I2S3_BCK);
gpio_set_mode(GPIO(I2S3_LRCK), PAD_I2S3_LRCK_FUNC_I2S3_LRCK);
gpio_set_mode(GPIO(I2S3_DO), PAD_I2S3_DO_FUNC_I2S3_DO);
}
static void mainboard_init(struct device *dev)
{
configure_emmc();
configure_sdcard();
configure_audio();
setup_usb_host();
register_reset_to_bl31();
if (dpm_init())
printk(BIOS_ERR, "dpm init fail, system can't do DVFS switch\n");
if (spm_init())
printk(BIOS_ERR, "spm init fail, system suspend may stuck\n");
if (display_init_required())
configure_display();
else
printk(BIOS_INFO, "%s: Skipped display init\n", __func__);
}
static void mainboard_enable(struct device *dev)
{
dev->ops->init = &mainboard_init;
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
