1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bootblock_common.h>
#include <northbridge/intel/sandybridge/raminit_native.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <superio/ite/common/ite.h>
#include <superio/ite/it8728f/it8728f.h>
#define SUPERIO_BASE 0x2e
#define SIO_GPIO PNP_DEV(SUPERIO_BASE, IT8728F_GPIO)
#define SERIAL_DEV PNP_DEV(SUPERIO_BASE, 0x01)
void bootblock_mainboard_early_init(void)
{
/* Initialize SuperIO */
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
ite_reg_write(SIO_GPIO, 0xEF, 0x7E); // magic SIO disable reboot
/* FIXME: These values could be configured in ramstage */
ite_reg_write(SIO_GPIO, 0x25, 0x40); // gpio pin function -> gp16
ite_reg_write(SIO_GPIO, 0x27, 0x10); // gpio pin function -> gp34
ite_reg_write(SIO_GPIO, 0x2c, 0x80); // smbus isolation on parallel port
ite_reg_write(SIO_GPIO, 0x62, 0x0a); // simple iobase 0xa00
ite_reg_write(SIO_GPIO, 0x72, 0x20); // watchdog timeout clear!
ite_reg_write(SIO_GPIO, 0x73, 0x00); // watchdog timeout clear!
ite_reg_write(SIO_GPIO, 0xcb, 0x00); // simple io set4 direction -> in
ite_reg_write(SIO_GPIO, 0xe9, 0x27); // bus select disable
ite_reg_write(SIO_GPIO, 0xf0, 0x10); // ?
ite_reg_write(SIO_GPIO, 0xf1, 0x42); // ?
ite_reg_write(SIO_GPIO, 0xf6, 0x1c); // hwmon alert beep -> gp36(pin12)
/* EC SIO settings */
ite_reg_write(IT8728F_EC, 0xf1, 0xc0);
ite_reg_write(IT8728F_EC, 0xf6, 0xf0);
ite_reg_write(IT8728F_EC, 0xf9, 0x48);
ite_reg_write(IT8728F_EC, 0x60, 0x0a);
ite_reg_write(IT8728F_EC, 0x61, 0x30);
ite_reg_write(IT8728F_EC, 0x62, 0x0a);
ite_reg_write(IT8728F_EC, 0x63, 0x20);
ite_reg_write(IT8728F_EC, 0x30, 0x01);
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
{ 1, 5, 0 },
{ 1, 5, 0 },
{ 1, 5, 1 },
{ 1, 5, 1 },
{ 1, 5, 2 },
{ 1, 5, 2 },
{ 1, 5, 3 },
{ 1, 5, 3 },
{ 1, 5, 4 },
{ 1, 5, 4 },
{ 1, 5, 6 },
{ 1, 5, 5 },
{ 1, 5, 5 },
{ 1, 5, 6 },
};
/* FIXME: The GA-B75M-D3V only has two DIMM slots! */
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
{
read_spd(&spd[0], 0x50, id_only);
read_spd(&spd[1], 0x51, id_only);
read_spd(&spd[2], 0x52, id_only);
read_spd(&spd[3], 0x53, id_only);
}
|
