1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
|
chip soc/intel/skylake
register "deep_s5_enable_ac" = "0"
register "deep_s5_enable_dc" = "0"
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "GPP_C"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
# Set the fixed lpc ranges
# enable COMA at 3f8 and COMB at 3e8 (instead of the default 2f8)
# enable the embedded controller
register "lpc_iod" = "0x0070"
register "lpc_ioe" = "LPC_IOE_COMA_EN | LPC_IOE_COMB_EN | LPC_IOE_EC_62_66"
# "Intel SpeedStep Technology"
register "eist_enable" = "1"
# DPTF
register "dptf_enable" = "1"
# FSP Configuration
register "ScsEmmcHs400Enabled" = "1"
register "SkipExtGfxScan" = "1"
register "SaGv" = "SaGv_Enabled"
# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
register "PmConfigSlpS3MinAssert" = "2"
# SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
register "PmConfigSlpS4MinAssert" = "4"
# SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
register "PmConfigSlpSusMinAssert" = "3"
# SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
register "PmConfigSlpAMinAssert" = "3"
# VR Settings Configuration for 4 Domains
#+----------------+-------+-------+-------+-------+
#| Domain/Setting | SA | IA | GTUS | GTS |
#+----------------+-------+-------+-------+-------+
#| Psi1Threshold | 20A | 20A | 20A | 20A |
#| Psi2Threshold | 5A | 5A | 5A | 5A |
#| Psi3Threshold | 1A | 1A | 1A | 1A |
#| Psi3Enable | 1 | 1 | 1 | 1 |
#| Psi4Enable | 1 | 1 | 1 | 1 |
#| ImonSlope | 0 | 0 | 0 | 0 |
#| ImonOffset | 0 | 0 | 0 | 0 |
#| IccMax | 5.1A | 32A | 35A | 31A |
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
#+----------------+-------+-------+-------+-------+
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0,
.imon_offset = 0,
.icc_max = VR_CFG_AMP(5.1),
.voltage_limit = 1520
}"
register "domain_vr_config[VR_IA_CORE]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0,
.imon_offset = 0,
.icc_max = VR_CFG_AMP(32),
.voltage_limit = 1520
}"
register "domain_vr_config[VR_GT_UNSLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0,
.imon_offset = 0,
.icc_max = VR_CFG_AMP(35),
.voltage_limit = 1520
}"
register "domain_vr_config[VR_GT_SLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0,
.imon_offset = 0,
.icc_max = VR_CFG_AMP(31),
.voltage_limit = 1520
}"
# Send an extra VR mailbox command for the PS4 exit issue
register "SendVrMbxCmd" = "2"
# Enable Root ports.
# PCIE Port 1 disabled
# PCIE Port 2 disabled
# PCIE Port 3 x1 -> Module x1 : Mapped to PCIe 2 on the baseboard
register "PcieRpEnable[2]" = "1"
# Disable CLKREQ#
register "PcieRpClkReqSupport[2]" = "0"
# Set MaxPayload to 256 bytes
register "PcieRpMaxPayload[2]" = "RpMaxPayload_256"
# Enable Latency Tolerance Reporting Mechanism
register "PcieRpLtrEnable[2]" = "1"
# Enable Advanced Error Reporting
register "PcieRpAdvancedErrorReporting[2]" = "1"
# Disable Aspm
register "pcie_rp_aspm[2]" = "AspmDisabled"
# PCIE Port 4 disabled
# PCIE Port 5 x1 -> MODULE i219
# PCIE Port 6 x1 -> BASEBOARD x1 i210 : Mapped to PCIe 4 on the baseboard
register "PcieRpEnable[5]" = "1"
register "PcieRpClkReqSupport[5]" = "0"
# Set MaxPayload to 256 bytes
register "PcieRpMaxPayload[5]" = "RpMaxPayload_256"
# Enable Latency Tolerance Reporting Mechanism
register "PcieRpLtrEnable[5]" = "1"
# Enable Advanced Error Reporting
register "PcieRpAdvancedErrorReporting[5]" = "1"
# Disable Aspm
register "pcie_rp_aspm[5]" = "AspmDisabled"
# PCIE Port 7 Disabled
# PCIE Port 8 Disabled
# PCIE Port 9 x4 -> BASEBOARD PEG0-3 FPGA
register "PcieRpEnable[8]" = "1"
# Disable CLKREQ#
register "PcieRpClkReqSupport[8]" = "0"
# Use Hot Plug subsystem
register "PcieRpHotPlug[8]" = "1"
# Set MaxPayload to 256 bytes
register "PcieRpMaxPayload[8]" = "RpMaxPayload_256"
# Enable Latency Tolerance Reporting Mechanism
register "PcieRpLtrEnable[8]" = "1"
# Enable Advanced Error Reporting
register "PcieRpAdvancedErrorReporting[8]" = "1"
# Disable Aspm
register "pcie_rp_aspm[8]" = "AspmDisabled"
# Must leave UART0 enabled or SD/eMMC will not work as PCI
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoDisabled,
[PchSerialIoIndexI2C1] = PchSerialIoDisabled,
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
[PchSerialIoIndexSpi0] = PchSerialIoDisabled,
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
[PchSerialIoIndexUart0] = PchSerialIoPci,
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
[PchSerialIoIndexUart2] = PchSerialIoDisabled,
}"
device domain 0 on
device ref igpu on end
device ref sa_thermal on end
device ref gmm on end
device ref south_xhci on
register "usb2_ports" = "{
[0] = USB2_PORT_TYPE_C(OC_SKIP), /* USB-C Port 2 */
[1] = USB2_PORT_MID(OC1), /* USB3_TYPE-A Port 1 */
[2] = USB2_PORT_MID(OC1), /* USB3_TYPE-A Port 2 */
[3] = USB2_PORT_TYPE_C(OC_SKIP), /* USB-C Port 1 */
[4] = USB2_PORT_SHORT(OC_SKIP), /* M2 Port */
[6] = USB2_PORT_SHORT(OC_SKIP), /* Audio board */
}"
register "usb3_ports" = "{
[0] = USB3_PORT_DEFAULT(OC_SKIP), /* USB-C Port 2 */
[1] = USB3_PORT_DEFAULT(OC_SKIP), /* USB3_TYPE-A Port 1 */
[2] = USB3_PORT_DEFAULT(OC_SKIP), /* USB3_TYPE-A Port 2 */
[3] = USB3_PORT_DEFAULT(OC_SKIP), /* USB-C Port 1 */
}"
end
device ref south_xdci on end
device ref thermal on end
device ref heci1 on end
device ref sata on
register "SataSalpSupport" = "1"
register "SataPortsEnable[0]" = "1"
end
device ref pcie_rp3 on end # x1 baseboard WWAN
device ref pcie_rp6 on end # x1 baseboard i210
device ref pcie_rp9 on end # x4 FPGA
device ref uart0 on end
device ref emmc on end
device ref lpc_espi on
register "serirq_mode" = "SERIRQ_CONTINUOUS"
# CPLD host command ranges are in 0x280-0x2BF
# EC PNP registers are at 0x6e and 0x6f
register "gen1_dec" = "0x003c0281"
register "gen3_dec" = "0x0004006d"
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
end
device ref hda on end # for HDMI only
device ref smbus on end
device ref fast_spi on end
device ref gbe on end
end
end
|
