1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0.
*/
#include <device/device.h>
#include <libbdk-hal/bdk-config.h>
#include <libbdk-hal/bdk-twsi.h>
#include <soc/twsi.h>
#include <soc/gpio.h>
#include <delay.h>
#include <soc/uart.h>
#include <console/console.h>
#include <soc/clock.h>
#include <soc/timer.h>
#include <soc/cpu.h>
#include <soc/sdram.h>
static void mainboard_print_info(void)
{
printk(BIOS_INFO, "MB: trusted boot : %s\n",
gpio_strap_value(10) ? "yes" : "no");
const size_t boot_method = gpio_strap_value(0) |
(gpio_strap_value(1) << 1) |
(gpio_strap_value(2) << 2) |
(gpio_strap_value(3) << 3);
printk(BIOS_INFO, "MB: boot method : ");
switch (boot_method) {
case 0x2:
case 0x3:
printk(BIOS_INFO, "EMMC\n");
break;
case 0x5:
case 0x6:
printk(BIOS_INFO, "SPI\n");
break;
case 0x8:
printk(BIOS_INFO, "REMOTE\n");
break;
case 0xc:
case 0xd:
printk(BIOS_INFO, "PCIe\n");
break;
default:
printk(BIOS_INFO, "unknown\n");
}
printk(BIOS_INFO, "MB: REFclk : %llu MHz\n",
thunderx_get_ref_clock() / 1000000ULL);
printk(BIOS_INFO, "MB: IOclk : %llu MHz\n",
thunderx_get_io_clock() / 1000000ULL);
printk(BIOS_INFO, "MB: COREclk : %llu MHz\n",
thunderx_get_core_clock() / 1000000ULL);
printk(BIOS_INFO, "MB: #CPU cores : %zu\n",
cpu_get_num_available_cores());
printk(BIOS_INFO, "MB: RAM : %zu MiB\n",
sdram_size_mb());
}
extern const struct bdk_devicetree_key_value devtree[];
static void mainboard_init(struct device *dev)
{
size_t i;
/* Init timer */
soc_timer_init();
/* Init CPUs */
for (i = 1; i < CONFIG_MAX_CPUS; i++)
start_cpu(i, NULL);
}
static void mainboard_enable(struct device *dev)
{
dev->ops->init = &mainboard_init;
bdk_config_set_fdt(devtree);
/*
* Adapted from Cavium's devicetree TWSI-WRITE:
* Init board-specific I2C hardware:
*/
twsi_init(0, I2C_SPEED_STANDARD);
/* Initialize IO expander U6 to power-up defaults */
/* float all pins 0.0-0.7 */
bdk_twsix_write_ia(0,0,0x21,6,1,1,0xff);
/* float all pins 1.0-1.7 */
bdk_twsix_write_ia(0,0,0x21,7,1,1,0xff);
/* 0.x: all outputs low, but disabled */
bdk_twsix_write_ia(0,0,0x21,2,1,1,0x00);
/* 1.x: all outputs low, but disabled */
bdk_twsix_write_ia(0,0,0x21,3,1,1,0x00);
/* 0.x: no polarity inversion */
bdk_twsix_write_ia(0,0,0x21,4,1,1,0x00);
/* 1.x: no polarity inversion */
bdk_twsix_write_ia(0,0,0x21,5,1,1,0x00);
/* Initialize IO expander U89 to power-up defaults */
/* float all pins 0.0-0.7 */
bdk_twsix_write_ia(0,0,0x22,6,1,1,0xff);
/* float all pins 1.0-1.7 */
bdk_twsix_write_ia(0,0,0x22,7,1,1,0xff);
/* 0.x: all outputs low, but disabled */
bdk_twsix_write_ia(0,0,0x22,2,1,1,0x00);
/* 1.x: all outputs low, but disabled */
bdk_twsix_write_ia(0,0,0x22,3,1,1,0x00);
/* 0.x: no polarity inversion */
bdk_twsix_write_ia(0,0,0x22,4,1,1,0x00);
/* 1.x: no polarity inversion */
bdk_twsix_write_ia(0,0,0x22,5,1,1,0x00);
/* set outputs SLIC_RESET_L=0 and SPI_SEL=0 */
bdk_twsix_write_ia(0,0,0x21,6,1,1,0xee); /* 0.0 & 0.4 are outputs */
/* Select channel-0 in PCA9546A to enable SFI */
bdk_twsix_write_ia(0, 0, 0x70, 0, 1, 1, 0x7);
mdelay(10);
/* Configure I2C-GPIO expander I/O directions */
bdk_twsix_write_ia(0, 0, 0x22, 6, 1, 1, 0x07);
mdelay(10);
/* Configure I2C-GPIO expander I/O directions */
bdk_twsix_write_ia(0, 0, 0x22, 7, 1, 1, 0x38);
mdelay(10);
/* Turn on SFP+ Transmitters */
bdk_twsix_write_ia(0, 0, 0x22, 2, 1, 1, 0x0);
mdelay(10);
/* Set VSC7224 to I2C mode */
bdk_twsix_write_ia(0, 0, 0x22, 3, 1, 1, 0x0);
mdelay(10);
/* Assert VSC7224 reset*/
bdk_twsix_write_ia(0, 0, 0x22, 2, 1, 1, 0x80);
mdelay(50);
/* Deassert VSC7224 reset*/
bdk_twsix_write_ia(0, 0, 0x22, 2, 1, 1, 0x0);
mdelay(50);
/* Page select FSYNC0 (0x30) */
bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0030);
mdelay(10);
/* Set FSYNC0 for 10.3125Gbps See Table 3 */
bdk_twsix_write_ia(0, 0, 0x14, 0x80, 2, 1, 0x2841);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x81, 2, 1, 0x0008);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x82, 2, 1, 0x7a00);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x83, 2, 1, 0x000f);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x84, 2, 1, 0x9c18);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x85, 2, 1, 0x0);
mdelay(10);
/* All channels Rx settings set equally */
bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0050);
mdelay(10);
/* Shrink EQ_BUFF */
bdk_twsix_write_ia(0, 0, 0x14, 0x82, 2, 1, 0x0014);
mdelay(10);
/* Select min DFE Delay (DFE_DELAY) */
bdk_twsix_write_ia(0, 0, 0x14, 0x90, 2, 1, 0x5585);
mdelay(10);
/* Set DFE 1-3 limit (DXMAX) = 32dec, AP Max limit = 127 decimal */
bdk_twsix_write_ia(0, 0, 0x14, 0x92, 2, 1, 0x207f);
mdelay(10);
/* Set AP Min limit = 32 decimal */
bdk_twsix_write_ia(0, 0, 0x14, 0x93, 2, 1, 0x2000);
mdelay(10);
/* Set DFE Averaging to the slowest (DFE_AVG) */
bdk_twsix_write_ia(0, 0, 0x14, 0x94, 2, 1, 0x0031);
mdelay(10);
/* Set Inductor Bypass OD_IND_BYP = 0 & fastest Rise/Fall */
bdk_twsix_write_ia(0, 0, 0x14, 0x9c, 2, 1, 0x0000);
mdelay(10);
/* Setting DFE Boost = none. Must set for rev C
* (if DFE in adapt mode) */
bdk_twsix_write_ia(0, 0, 0x14, 0xaa, 2, 1, 0x0888);
mdelay(10);
/* Setting EQ Min/Max = 8/72 */
bdk_twsix_write_ia(0, 0, 0x14, 0xa8, 2, 1, 0x2408);
mdelay(10);
/* Setting EQVGA = 96, when in EQVGA manual mode */
bdk_twsix_write_ia(0, 0, 0x14, 0xa9, 2, 1, 0x0060);
mdelay(10);
/* Setting SW_BFOCM, bits 15:14 to 01 */
bdk_twsix_write_ia(0, 0, 0x14, 0x87, 2, 1, 0x4021);
mdelay(10);
/* Turn off adaptive input equalization and VGA adaptive algorithm
* control */
bdk_twsix_write_ia(0, 0, 0x14, 0x89, 2, 1, 0x7313);
mdelay(10);
/* Turn on adaptive input equalization and VGA adaptive algorithm
* control */
bdk_twsix_write_ia(0, 0, 0x14, 0x89, 2, 1, 0x7f13);
mdelay(10);
/* TAP settings for each channel 0-3 */
/* Ch-0 Tx */
bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0000);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x99, 2, 1, 0x001f);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x9a, 2, 1, 0x000f);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x9b, 2, 1, 0x0004);
mdelay(10);
/* Ch-1 Rx */
bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0001);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x97, 2, 1, 0x1400);
mdelay(10);
/* Transmitter Output polarity Inverted (Unfortunately,
* Rx polarity lines are wrongly inverted on board */
bdk_twsix_write_ia(0, 0, 0x14, 0x97, 2, 1, 0x4000);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x99, 2, 1, 0x000f);
mdelay(10);
/* Ch-2 Tx */
bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0002);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x99, 2, 1, 0x001f);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x9a, 2, 1, 0x000f);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x9b, 2, 1, 0x0004);
mdelay(10);
/* Ch-3 Rx */
bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0003);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x97, 2, 1, 0x1400);
mdelay(10);
/* Transmitter Output polarity Inverted (Unfortunately,
* Rx polarity lines are wrongly inverted on board */
bdk_twsix_write_ia(0, 0, 0x14, 0x97, 2, 1, 0x4000);
mdelay(10);
bdk_twsix_write_ia(0, 0, 0x14, 0x99, 2, 1, 0x000f);
mdelay(10);
/**
* The following hardware magically starts working after toggling
* GPIO_10_PHY_RESET_L:
* * SATA PHY
* * GBE PHY
* * XFI PHY
* * MMC
*/
gpio_output(10, 0);
udelay(100);
gpio_output(10, 1);
mainboard_print_info();
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
