1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "AGESA.h"
#include "amdlib.h"
#include <northbridge/amd/pi/BiosCallOuts.h>
#include "Ids.h"
#include "heapManager.h"
#include "FchPlatform.h"
#include "cbfs.h"
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
#include "imc.h"
#endif
#include "hudson.h"
#include <stdlib.h>
#include <spd_bin.h>
static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr);
static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr);
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
{AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer },
{AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer },
{AGESA_LOCATE_BUFFER, agesa_LocateBuffer },
{AGESA_READ_SPD, board_ReadSpd_from_cbfs },
{AGESA_DO_RESET, agesa_Reset },
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
{AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
{AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
{AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
{AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
/**
* Realtek ALC272 CODEC Verb Table
*/
static const CODEC_ENTRY Alc272_VerbTbl[] = {
{0x11, 0x411111F0}, // - SPDIF_OUT2
{0x12, 0x411111F0}, // - DMIC_1/2
{0x13, 0x411111F0}, // - DMIC_3/4
{0x14, 0x411111F0}, // Port D - LOUT1
{0x15, 0x411111F0}, // Port A - LOUT2
{0x16, 0x411111F0}, //
{0x17, 0x411111F0}, // Port H - MONO
{0x18, 0x01a19840}, // Port B - MIC1
{0x19, 0x411111F0}, // Port F - MIC2
{0x1a, 0x01813030}, // Port C - LINE1
{0x1b, 0x411111F0}, // Port E - LINE2
{0x1d, 0x40251E05}, // - PCBEEP
{0x1e, 0x01441120}, // - SPDIF_OUT1
{0x21, 0x01214010}, // Port I - HPOUT
{0xff, 0xffffffff}
};
static const CODEC_TBL_LIST CodecTableList[] =
{
{0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]},
{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
};
#define FAN_INPUT_INTERNAL_DIODE 0
#define FAN_INPUT_TEMP0 1
#define FAN_INPUT_TEMP1 2
#define FAN_INPUT_TEMP2 3
#define FAN_INPUT_TEMP3 4
#define FAN_INPUT_TEMP0_FILTER 5
#define FAN_INPUT_ZERO 6
#define FAN_INPUT_DISABLED 7
#define FAN_AUTOMODE (1 << 0)
#define FAN_LINEARMODE (1 << 1)
#define FAN_STEPMODE ~(1 << 1)
#define FAN_POLARITY_HIGH (1 << 2)
#define FAN_POLARITY_LOW ~(1 << 2)
/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
#define FREQ_28KHZ 0x0
#define FREQ_25KHZ 0x1
#define FREQ_23KHZ 0x2
#define FREQ_21KHZ 0x3
#define FREQ_29KHZ 0x4
#define FREQ_18KHZ 0x5
#define FREQ_100HZ 0xF7
#define FREQ_87HZ 0xF8
#define FREQ_58HZ 0xF9
#define FREQ_44HZ 0xFA
#define FREQ_35HZ 0xFB
#define FREQ_29HZ 0xFC
#define FREQ_22HZ 0xFD
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
/*
* Hardware Monitor Fan Control
* Hardware limitation:
* HWM will fail to read the input temperature via I2C if other
* software switches the I2C address. AMD recommends using IMC
* to control fans, instead of HWM.
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
FCH_HWM_FAN_CTR oem_factl[5] = {
/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
/* DB-FT3 FanOUT0 Fan header J32 */
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
/* DB-FT3 FanOUT1 Fan header J31*/
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
};
LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
/* Enable IMC fan control. the recommended way */
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
FchParams->Imc.ImcEnable = TRUE;
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
/* Thermal Zone Parameter */
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
/* IMC Fan Policy temperature thresholds */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
/* IMC Fan Policy PWM Settings */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5;
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
/* IMC Function */
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8;
/* NOTE:
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
* so we remove it from AGESA code. Please See FchInitLateHwm.
*/
#else /* HWM fan control, using the alternative method */
FchParams->Imc.ImcEnable = FALSE;
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */
#endif /* CONFIG_HUDSON_IMC_FWM */
}
/**
* Fch Oem setting callback
*
* Configure platform specific Hudson device,
* such Azalia, SATA, IMC etc.
*/
static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr)
{
AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr;
if (StdHeader->Func == AMD_INIT_RESET) {
FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *) FchData;
printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
//FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
FchParams->LegacyFree = CONFIG_HUDSON_LEGACY_FREE;
FchParams->FchReset.SataEnable = hudson_sata_enable();
FchParams->FchReset.IdeEnable = hudson_ide_enable();
FchParams->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
FchParams->FchReset.Xhci1Enable = FALSE;
} else if (StdHeader->Func == AMD_INIT_ENV) {
FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData;
printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
/* Azalia Controller OEM Codec Table Pointer */
FchParams->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
/* Azalia Controller Front Panel OEM Table Pointer */
/* Fan Control */
oem_fan_control(FchParams);
/* XHCI configuration */
FchParams->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
FchParams->Usb.Xhci1Enable = FALSE;
/* sata configuration */
FchParams->Sata.SataClass = CONFIG_HUDSON_SATA_MODE;
switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) {
case SataRaid:
case SataAhci:
case SataAhci7804:
case SataLegacyIde:
FchParams->Sata.SataIdeMode = FALSE;
break;
case SataIde2Ahci:
case SataIde2Ahci7804:
default: /* SataNativeIde */
FchParams->Sata.SataIdeMode = TRUE;
break;
}
}
printk(BIOS_DEBUG, "Done\n");
return AGESA_SUCCESS;
}
static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
AGESA_STATUS Status = AGESA_UNSUPPORTED;
#ifdef __PRE_RAM__
AGESA_READ_SPD_PARAMS *info = ConfigPtr;
u8 index;
if (IS_ENABLED(CONFIG_BAP_E21_DDR3_1066))
index = 1;
else if (IS_ENABLED(CONFIG_BAP_E21_DDR3_1333))
index = 2;
else /* CONFIG_BAP_E21_DDR3_800 */
index = 0;
if (info->MemChannelId > 0)
return AGESA_UNSUPPORTED;
if (info->SocketId != 0)
return AGESA_UNSUPPORTED;
if (info->DimmId != 0)
return AGESA_UNSUPPORTED;
/* Read index 0, first SPD_SIZE bytes of spd.bin file. */
if (read_ddr3_spd_from_cbfs((u8 *)info->Buffer, index) < 0)
die("No SPD data\n");
Status = AGESA_SUCCESS;
#endif
return Status;
}
|
