1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2015 Damien Zammit <damien@zamaudio.com>
* Copyright (C) 2017 Arthur Heymans <arthur@aheymans.xyz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <bootblock_common.h>
#include <cf9_reset.h>
#include <device/pnp_ops.h>
#include <console/console.h>
#include <cpu/intel/speedstep.h>
#include <cpu/x86/msr.h>
#include <northbridge/intel/x4x/x4x.h>
#include <superio/winbond/common/winbond.h>
#include <superio/winbond/w83627dhg/w83627dhg.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
#define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V)
void bootblock_mainboard_early_init(void)
{
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
static u8 msr_get_fsb(void)
{
u8 fsbcfg;
msr_t msr;
const u32 eax = cpuid_eax(1);
/* Netburst */
if (((eax >> 8) & 0xf) == 0xf) {
msr = rdmsr(MSR_EBC_FREQUENCY_ID);
fsbcfg = (msr.lo >> 16) & 0x7;
} else { /* Intel Core 2 */
msr = rdmsr(MSR_FSB_FREQ);
fsbcfg = msr.lo & 0x7;
}
return fsbcfg;
}
/* BSEL MCH straps are not hooked up to the CPU as usual but to the SIO */
static int setup_sio_gpio(void)
{
int need_reset = 0;
u8 reg, old_reg;
u8 bsel = msr_get_fsb();
switch (bsel) {
case 0:
case 2:
case 4:
break;
default:
printk(BIOS_WARNING,
"BSEL: Unsupported FSB frequency, using 800MHz\n");
bsel = 2; /* 800MHz */
break;
}
pnp_enter_ext_func_mode(GPIO_DEV);
pnp_set_logical_device(GPIO_DEV);
if (CONFIG(BOARD_ASUS_P5QPL_AM)) {
/*
* P5QPL-AM:
* BSEL0 -> not hooked up (not supported anyways)
* BSEL1 -> GPIO33
* BSEL2 -> GPIO40
*/
reg = 0x92;
old_reg = pnp_read_config(GPIO_DEV, 0x2c);
pnp_write_config(GPIO_DEV, 0x2c, reg);
need_reset = (reg != old_reg);
pnp_write_config(GPIO_DEV, 0x30, 0x06);
pnp_write_config(GPIO_DEV, 0xf0, 0xf3); /* GPIO3 direction */
pnp_write_config(GPIO_DEV, 0xf4, 0x00); /* GPIO4 direction */
const int gpio33 = (bsel & 2) >> 1;
const int gpio40 = (bsel & 4) >> 2;
reg = (gpio33 << 3);
old_reg = pnp_read_config(GPIO_DEV, 0xf1);
pnp_write_config(GPIO_DEV, 0xf1, old_reg | reg);
need_reset += ((reg & 0x8) != (old_reg & 0x8));
reg = gpio40;
old_reg = pnp_read_config(GPIO_DEV, 0xf5);
pnp_write_config(GPIO_DEV, 0xf5, old_reg | reg);
need_reset += ((reg & 0x1) != (old_reg & 0x1));
} else {
/*
* P5G41T-M LX:
* BSEL0 -> not hooked up
* BSEL1 -> GPIO43 (inverted)
* BSEL2 -> GPIO44
*/
reg = 0xf2;
old_reg = pnp_read_config(GPIO_DEV, 0x2c);
pnp_write_config(GPIO_DEV, 0x2c, reg);
need_reset = (reg != old_reg);
pnp_write_config(GPIO_DEV, 0x30, 0x05);
pnp_write_config(GPIO_DEV, 0xf6, 0x08); /* invert GPIO43 */
pnp_write_config(GPIO_DEV, 0xf4, 0x00); /* GPIO4 direction */
const int gpio43 = (bsel & 2) >> 1;
const int gpio44 = (bsel & 4) >> 2;
reg = (gpio43 << 3) | (gpio44 << 4);
old_reg = pnp_read_config(GPIO_DEV, 0xf5);
pnp_write_config(GPIO_DEV, 0xf5, old_reg | reg);
need_reset += ((reg & 0x18) != (old_reg & 0x18));
}
pnp_exit_ext_func_mode(GPIO_DEV);
return need_reset;
}
void mb_pre_raminit_setup(int s3_resume)
{
if (!s3_resume && setup_sio_gpio()) {
printk(BIOS_DEBUG, "Needs reset to configure CPU BSEL straps\n");
full_reset();
}
}
void mb_get_spd_map(u8 spd_map[4])
{
spd_map[0] = 0x50;
spd_map[2] = 0x52;
}
|
