1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
#include <device/azalia.h>
#include <AGESA.h>
#include <console/console.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <northbridge/amd/agesa/state_machine.h>
#include <FchPlatform.h>
#include <stdlib.h>
#include <option.h>
#include <types.h>
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
{AGESA_DO_RESET, agesa_Reset },
{AGESA_READ_SPD, agesa_ReadSpd },
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
{AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
{AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
{AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
/**
* CODEC Initialization Table for Azalia HD Audio using Realtek ALC887-VD chip (from linux, running under vendor bios)
*/
const CODEC_ENTRY Alc887_VerbTbl[] =
{
{ 0x11, 0x40330000 },
{ 0x12, 0x411111f0 },
{ 0x14, 0x01014010 },
{ 0x15, 0x411111f0 },
{ 0x16, 0x411111f0 },
{ 0x17, 0x411111f0 },
{ 0x18, 0x01a19030 },
{ 0x19, 0x02a19040 },
{ 0x1a, 0x0181303f },
{ 0x1b, 0x02214020 },
{ 0x1c, 0x411111f0 },
{ 0x1d, 0x4024c601 },
{ 0x1e, 0x411111f0 },
{ 0x1f, 0x411111f0 }
};
static const CODEC_TBL_LIST CodecTableList[] =
{
{0x10ec0887, (CODEC_ENTRY*)&Alc887_VerbTbl[0]},
{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
};
#define FAN_INPUT_INTERNAL_DIODE 0
#define FAN_INPUT_TEMP0 1
#define FAN_INPUT_TEMP1 2
#define FAN_INPUT_TEMP2 3
#define FAN_INPUT_TEMP3 4
#define FAN_INPUT_TEMP0_FILTER 5
#define FAN_INPUT_ZERO 6
#define FAN_INPUT_DISABLED 7
#define FAN_AUTOMODE (1 << 0)
#define FAN_LINEARMODE (1 << 1)
#define FAN_STEPMODE ~(1 << 1)
#define FAN_POLARITY_HIGH (1 << 2)
#define FAN_POLARITY_LOW ~(1 << 2)
/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
#define FREQ_28KHZ 0x0
#define FREQ_25KHZ 0x1
#define FREQ_23KHZ 0x2
#define FREQ_21KHZ 0x3
#define FREQ_29KHZ 0x4
#define FREQ_18KHZ 0x5
#define FREQ_100HZ 0xF7
#define FREQ_87HZ 0xF8
#define FREQ_58HZ 0xF9
#define FREQ_44HZ 0xFA
#define FREQ_35HZ 0xFB
#define FREQ_29HZ 0xFC
#define FREQ_22HZ 0xFD
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset)
{
FchParams_reset->LegacyFree = CONFIG(HUDSON_LEGACY_FREE);
FchParams_reset->Mode = 6;
/* Read SATA speed setting from CMOS */
enum cb_err ret;
ret = get_option(&FchParams_reset->SataSetMaxGen2, "sata_speed");
if (ret != CB_SUCCESS) {
FchParams_reset->SataSetMaxGen2 = 0;
printk(BIOS_DEBUG, "ERROR: cannot read CMOS setting, falling back to default. Error code: %x\n", (int)ret);
}
printk(BIOS_DEBUG, "Force SATA 3Gbps mode = %x\n", FchParams_reset->SataSetMaxGen2);
}
void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env)
{
/* Azalia Controller OEM Codec Table Pointer */
FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
/* Fan Control */
FchParams_env->Imc.ImcEnable = FALSE;
FchParams_env->Hwm.HwMonitorEnable = FALSE;
FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */
/* Read SATA controller mode from CMOS */
enum cb_err ret;
ret = get_option(&FchParams_env->Sata.SataClass, "sata_mode");
if (ret != CB_SUCCESS) {
FchParams_env->Sata.SataClass = 0;
printk(BIOS_DEBUG, "ERROR: cannot read CMOS setting, falling back to default. Error code: %x\n", (int)ret);
}
switch ((SATA_CLASS)FchParams_env->Sata.SataClass) {
case SataLegacyIde:
case SataRaid:
case SataAhci:
case SataAhci7804:
FchParams_env->Sata.SataIdeMode = FALSE;
printk(BIOS_DEBUG, "AHCI or RAID or IDE = %x\n", FchParams_env->Sata.SataClass);
break;
case SataIde2Ahci:
case SataIde2Ahci7804:
default: /* SataNativeIde */
FchParams_env->Sata.SataIdeMode = TRUE;
printk(BIOS_DEBUG, "IDE2AHCI = %x\n", FchParams_env->Sata.SataClass);
break;
}
}
|
