1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
|
##
## This file is part of the coreboot project.
##
## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License v2 as published by
## the Free Software Foundation.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses IRQ_SLOT_COUNT
uses HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses FALLBACK_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_ROM_PAYLOAD_START
uses PAYLOAD_SIZE
uses _ROMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses STACK_SIZE
uses HEAP_SIZE
# uses USE_OPTION_TABLE
# uses CONFIG_LB_MEM_TOPK
uses HAVE_ACPI_TABLES
uses LB_CKS_RANGE_START
uses LB_CKS_RANGE_END
uses LB_CKS_LOC
uses MAINBOARD
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
uses _RAMBASE
uses CONFIG_GDB_STUB
uses CROSS_COMPILE
uses CC
uses HOSTCC
uses OBJCOPY
uses TTYS0_BAUD
uses TTYS0_BASE
uses TTYS0_LCS
uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
# bx_b001- uses K8_HW_MEM_HOLE_SIZEK
uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_USE_INIT
uses ENABLE_APIC_EXT_ID
uses APIC_ID_OFFSET
uses LIFT_BSP_APIC_ID
uses HT_CHAIN_UNITID_BASE
uses HT_CHAIN_END_UNITID_BASE
# bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
# bx_b005+
uses SB_HT_CHAIN_ON_BUS0
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
default ROM_SIZE = 512 * 1024
default FALLBACK_SIZE = 256 * 1024
default HAVE_FALLBACK_BOOT = 1
default HAVE_HARD_RESET = 0
default HAVE_PIRQ_TABLE = 0
default IRQ_SLOT_COUNT = 11 # FIXME?
default HAVE_MP_TABLE = 1
default HAVE_OPTION_TABLE = 0 # FIXME
# Move the default coreboot CMOS range off of AMD RTC registers.
default LB_CKS_RANGE_START = 49
default LB_CKS_RANGE_END = 122
default LB_CKS_LOC = 123
default CONFIG_SMP = 1
default CONFIG_MAX_CPUS = 2
default CONFIG_MAX_PHYSICAL_CPUS = 1
default CONFIG_LOGICAL_CPUS = 1
default HAVE_ACPI_TABLES = 1
# default CONFIG_CHIP_NAME = 1
# 1G memory hole
# bx_b001- default K8_HW_MEM_HOLE_SIZEK = 0x100000
# Opteron K8 1G HT support
default K8_HT_FREQ_1G_SUPPORT = 1
# HT Unit ID offset, default is 1, the typical one.
default HT_CHAIN_UNITID_BASE = 0x0
# Real SB Unit ID, default is 0x20, mean don't touch it at last.
# default HT_CHAIN_END_UNITID_BASE = 0x0
# Make the SB HT chain on bus 0, default is not (0).
# bx_b001- default K8_SB_HT_CHAIN_ON_BUS0 = 2
# bx_b005+ make the SB HT chain on bus 0.
default SB_HT_CHAIN_ON_BUS0 = 1
# Only offset for SB chain?, default is yes(1).
default SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
default CONFIG_CONSOLE_VGA = 1 # Needed for VGA.
default CONFIG_PCI_ROM_RUN = 1 # Needed for VGA.
default USE_DCACHE_RAM = 1
default DCACHE_RAM_BASE = 0xcc000
default DCACHE_RAM_SIZE = 0x4000
default DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000
default CONFIG_USE_INIT = 0
default ENABLE_APIC_EXT_ID = 0
default APIC_ID_OFFSET = 0x10
default LIFT_BSP_APIC_ID = 0
default CONFIG_IOAPIC = 1
default MAINBOARD_VENDOR = "ASUS"
default MAINBOARD_PART_NUMBER = "A8V-E SE"
default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043
# default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x1234 # FIXME
default ROM_IMAGE_SIZE = 64 * 1024
default STACK_SIZE = 8 * 1024
default HEAP_SIZE = 256 * 1024
# More 1M for pgtbl.
# default CONFIG_LB_MEM_TOPK = 2048
default _RAMBASE = 0x00004000
# default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
default CONFIG_ROM_PAYLOAD = 1
default CC = "$(CROSS_COMPILE)gcc -m32"
default HOSTCC = "gcc"
default CONFIG_GDB_STUB = 0
default CONFIG_CONSOLE_SERIAL8250 = 1
default TTYS0_BAUD = 115200
default TTYS0_BASE = 0x3f8
default TTYS0_LCS = 0x3 # 8n1
default DEFAULT_CONSOLE_LOGLEVEL = 8
default MAXIMUM_CONSOLE_LOGLEVEL = 8
default MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
end
|