1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <stdint.h>
#include <bootblock_common.h>
#include <device/pci_ops.h>
#include <device/pnp_ops.h>
#include <option.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <superio/nuvoton/common/nuvoton.h>
#include <superio/nuvoton/nct6776/nct6776.h>
#define GLOBAL_DEV PNP_DEV(0x2e, 0)
#define SERIAL_DEV PNP_DEV(0x2e, NCT6776_SP1)
#define GPIO6789_DEV PNP_DEV(0x2e, NCT6776_GPIO6789_V)
/* As defined in cmos.layout */
enum cpu_fan_tach_src {
CPU_FAN_HEADER_NONE,
CPU_FAN_HEADER_1,
CPU_FAN_HEADER_2,
CPU_FAN_HEADER_BOTH
};
const struct southbridge_usb_port mainboard_usb_ports[] = {
{ 1, 0, 0 },
{ 1, 0, 0 },
{ 1, 1, 1 },
{ 1, 1, 1 },
{ 1, 1, 2 },
{ 1, 1, 2 },
{ 1, 0, 3 },
{ 1, 0, 3 },
{ 1, 0, 4 },
{ 1, 0, 4 },
{ 1, 0, 6 },
{ 1, 1, 5 },
{ 1, 1, 5 },
{ 1, 0, 6 },
};
/*
* The tachometer signal that goes to CPUFANIN of the Super I/O is set via
* GPIOs.
*
* When GP77 (register E1h[7]) is '0', CPU_FAN1 is connected.
* When GP76 (register E1h[6]) is '0', CPU_FAN2 is connected.
* When both are '0' and both fans are connected, wrong readings will
* be reported.
*/
static u8 get_cpufanin_gpio_config(void)
{
switch (get_uint_option("cpu_fan_tach_src", CPU_FAN_HEADER_1)) {
case CPU_FAN_HEADER_NONE:
return 0xff;
case CPU_FAN_HEADER_1:
default:
return 0x7f;
case CPU_FAN_HEADER_2:
return 0xbf;
case CPU_FAN_HEADER_BOTH:
return 0x3f;
}
};
void bootblock_mainboard_early_init(void)
{
nuvoton_pnp_enter_conf_state(GLOBAL_DEV);
/* Configure Super I/O pins */
pnp_write_config(GLOBAL_DEV, 0x1b, 0x68);
pnp_write_config(GLOBAL_DEV, 0x1c, 0x80);
pnp_write_config(GLOBAL_DEV, 0x24, 0x5c);
pnp_write_config(GLOBAL_DEV, 0x27, 0xc0);
pnp_write_config(GLOBAL_DEV, 0x2a, 0x62);
pnp_write_config(GLOBAL_DEV, 0x2b, 0x08);
pnp_write_config(GLOBAL_DEV, 0x2c, 0x80);
/* GP77 and GP76 are outputs. They set the tachometer input on CPUFANIN. */
pnp_set_logical_device(GPIO6789_DEV);
pnp_write_config(GPIO6789_DEV, 0xe0, 0x3f);
pnp_write_config(GPIO6789_DEV, 0xe1, get_cpufanin_gpio_config());
nuvoton_pnp_exit_conf_state(GLOBAL_DEV);
/* Enable UART */
nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
|
