1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
|
/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <console/console.h>
#include <device/pci.h>
#include <string.h>
#include <stdint.h>
#include <arch/pirq_routing.h>
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
32+16*11, /* there can be total 11 devices on the bus */
3, /* Where the interrupt router lies (bus) */
(4<<3)|3, /* Where the interrupt router lies (dev) */
0, /* IRQs devoted exclusively to PCI usage */
0x1022, /* Vendor */
0x746b, /* Device */
0, /* Crap (miniport) */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
0x42, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
{
{3,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
{0x6,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0},
{0x1,0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0x0, 0},
{0x5,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0},
{0x5,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0},
{0x4,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0},
{0x4,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0},
{0x6,(0x0a<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0},
{0x4,(9<<3)|0, {{0x1, 0xdef8}, {2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0},
{0x6,(0x0b<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
{0x6,(0x0c<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
}
};
static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
pirq_info->bus = bus;
pirq_info->devfn = devfn;
pirq_info->irq[0].link = link0;
pirq_info->irq[0].bitmap = bitmap0;
pirq_info->irq[1].link = link1;
pirq_info->irq[1].bitmap = bitmap1;
pirq_info->irq[2].link = link2;
pirq_info->irq[2].bitmap = bitmap2;
pirq_info->irq[3].link = link3;
pirq_info->irq[3].bitmap = bitmap3;
pirq_info->slot = slot;
pirq_info->rfu = rfu;
}
extern unsigned char bus_8132_0;
extern unsigned char bus_8132_1;
extern unsigned char bus_8132_2;
extern unsigned char bus_8111_0;
extern unsigned char bus_8111_1;
extern unsigned char bus_8151_0;
extern unsigned char bus_8151_1;
extern void get_bus_conf(void);
unsigned long write_pirq_routing_table(unsigned long addr)
{
struct irq_routing_table *pirq;
struct irq_info *pirq_info;
unsigned slot_num;
uint8_t *v;
uint8_t sum=0;
int i;
/* Align the table to be 16 byte aligned. */
addr += 15;
addr &= ~15;
/* This table must be betweeen 0xf0000 & 0x100000 */
printk_info("Writing IRQ routing tables to 0x%x...", addr);
pirq = (void *)(addr);
v = (uint8_t *)(addr);
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
pirq->rtr_bus = bus_8111_0;
#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
pirq->rtr_devfn = ((2+HT_CHAIN_END_UNITID_BASE-1)<<3)|0;
#else
pirq->rtr_devfn = ((4+HT_CHAIN_UNITID_BASE-1)<<3)|0;
#endif
pirq->exclusive_irqs = 0;
pirq->rtr_vendor = 0x1022;
pirq->rtr_device = 0x746b;
pirq->miniport_data = 0;
memset(pirq->rfu, 0, sizeof(pirq->rfu));
get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
pirq_info = (void *) ( &pirq->checksum + 1);
slot_num = 0;
//pci bridge
#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
write_pirq_info(pirq_info, bus_8111_0, ((2+HT_CHAIN_END_UNITID_BASE-1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
#else
write_pirq_info(pirq_info, bus_8111_0, ((4+HT_CHAIN_UNITID_BASE-1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
#endif
pirq_info++; slot_num++;
//pcix bridge
// write_pirq_info(pirq_info, bus_8132_0, (1<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
// pirq_info++; slot_num++;
//agp bridge
#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
write_pirq_info(pirq_info, bus_8151_0, (1<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); // FIXE: Only do that on SB chain?
#else
write_pirq_info(pirq_info, bus_8151_0, ((1+HT_CHAIN_UNITID_BASE-1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); // FIXE: Only do that on SB chain
#endif
pirq_info++; slot_num++;
pirq->size = 32 + 16 * slot_num;
for (i = 0; i < pirq->size; i++)
sum += v[i];
sum = pirq->checksum - sum;
if (sum != pirq->checksum) {
pirq->checksum = sum;
}
printk_info("done.\n");
return (unsigned long) pirq_info;
}
|
