1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include "southbridge/amd/sb700/sb700.h"
#include "southbridge/amd/sb700/smbus.h"
void set_pcie_dereset(void);
void set_pcie_reset(void);
u8 is_dev3_present(void);
/*
* Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to
* pull it up before training the slot.
***/
void set_pcie_dereset()
{
u16 word;
device_t sm_dev;
/* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0xA8);
word |= (1 << 0) | (1 << 2); /* Set Gpio6,4 as output */
word &= ~((1 << 8) | (1 << 10));
pci_write_config16(sm_dev, 0xA8, word);
}
void set_pcie_reset()
{
u16 word;
device_t sm_dev;
/* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0xA8);
word &= ~((1 << 0) | (1 << 2)); /* Set Gpio6,4 as output */
word &= ~((1 << 8) | (1 << 10));
pci_write_config16(sm_dev, 0xA8, word);
}
#if 0 /* not tested yet. */
/********************************************************
* mahogany uses SB700 GPIO9 to detect IDE_DMA66.
* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
* get the cable type, 40 pin or 80 pin?
********************************************************/
static void get_ide_dma66(void)
{
u8 byte;
/*u32 sm_dev, ide_dev; */
device_t sm_dev, ide_dev;
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
byte = pci_read_config8(sm_dev, 0xA9);
byte |= (1 << 5); /* Set Gpio9 as input */
pci_write_config8(sm_dev, 0xA9, byte);
ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
byte = pci_read_config8(ide_dev, 0x56);
byte &= ~(7 << 0);
if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
byte |= 2 << 0; /* mode 2 */
else
byte |= 5 << 0; /* mode 5 */
pci_write_config8(ide_dev, 0x56, byte);
}
#endif /* get_ide_dma66() */
u8 is_dev3_present(void)
{
return 0;
}
/*************************************************
* enable the dedicated function in mahogany board.
* This function called early than rs780_enable.
*************************************************/
static void mainboard_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev);
set_pcie_dereset();
/* get_ide_dma66(); */
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
