1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include <southbridge/amd/sb800/sb800.h>
u8 is_dev3_present(void);
void set_pcie_dereset(void);
void set_pcie_reset(void);
void enable_int_gfx(void);
/* GPIO6. */
void enable_int_gfx(void)
{
u8 byte;
volatile u8 *gpio_reg;
pm_iowrite(0xEA, 0x01); /* diable the PCIB */
/* Disable Gec */
byte = pm_ioread(0xF6);
byte |= 1;
pm_iowrite(0xF6, byte);
/* make sure the fed80000 is accessible */
byte = pm_ioread(0x24);
byte |= 1;
pm_iowrite(0x24, byte);
gpio_reg = (volatile u8 *)0xFED80000 + 0xD00; /* IoMux Register */
*(gpio_reg + 0x6) = 0x1; /* Int_vga_en */
*(gpio_reg + 170) = 0x1; /* gpio_gate */
gpio_reg = (volatile u8 *)0xFED80000 + 0x100; /* GPIO Registers */
*(gpio_reg + 0x6) = 0x8;
*(gpio_reg + 170) = 0x0;
}
/*
* Bimini uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to
* pull it up before training the slot.
***/
void set_pcie_dereset(void)
{
/* GPIO 50h reset PCIe slot */
/*
u8 *addr = (u8 *)(0xFED80000 + 0x100 + 0x50);
u8 byte = ~(1 << 5);
byte |= ~(1 << 6);
*addr = byte;
*/
}
void set_pcie_reset(void)
{
/* GPIO 50h reset PCIe slot */
/*
u8 *addr = (u8 *)(0xFED80000 + 0x100 + 0x50);
u8 byte = ~((1 << 5) | (1 << 6));
*addr = byte;
*/
}
u8 is_dev3_present(void)
{
return 0;
}
#if 0 /* not tested yet. */
/********************************************************
* bimini uses SB800 GPIO9 to detect IDE_DMA66.
* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
* get the cable type, 40 pin or 80 pin?
********************************************************/
static void get_ide_dma66(void)
{
u8 byte;
/*u32 sm_dev, ide_dev; */
device_t sm_dev, ide_dev;
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
byte = pci_read_config8(sm_dev, 0xA9);
byte |= (1 << 5); /* Set Gpio9 as input */
pci_write_config8(sm_dev, 0xA9, byte);
ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
byte = pci_read_config8(ide_dev, 0x56);
byte &= ~(7 << 0);
if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
byte |= 2 << 0; /* mode 2 */
else
byte |= 5 << 0; /* mode 5 */
pci_write_config8(ide_dev, 0x56, byte);
}
#endif /* get_ide_dma66() */
/*************************************************
* enable the dedicated function in bimini board.
* This function called early than rs780_enable.
*************************************************/
static void bimini_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard BIMINI Enable. dev=0x%p\n", dev);
set_pcie_dereset();
enable_int_gfx();
/* get_ide_dma66(); */
}
struct chip_operations mainboard_ops = {
CHIP_NAME("AMD Bimini Mainboard")
.enable_dev = bimini_enable,
};
|
