1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <console/console.h>
#include <device/device.h>
#include "chip.h"
#include "kempld.h"
#include "kempld_internal.h"
static void kempld_uart_read_resources(struct device *dev)
{
static const unsigned int io_addr[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
const struct ec_kontron_kempld_config *const config = dev->chip_info;
const unsigned int uart = dev->path.generic.subid;
if (!config || uart >= KEMPLD_NUM_UARTS)
return;
const enum kempld_uart_io io = config->uart[uart].io;
if (io >= ARRAY_SIZE(io_addr)) {
printk(BIOS_ERR, "KEMPLD: Bad io value '%d' for UART#%u\n.", io, uart);
dev->enabled = false;
return;
}
const int irq = config->uart[uart].irq;
if (irq >= 16) {
printk(BIOS_ERR, "KEMPLD: Bad irq value '%d' for UART#%u\n.", irq, uart);
dev->enabled = false;
return;
}
struct resource *res_io = new_resource(dev, 0);
res_io->base = io_addr[io];
res_io->size = 8;
res_io->flags = IORESOURCE_IO | IORESOURCE_FIXED |
IORESOURCE_STORED | IORESOURCE_ASSIGNED;
struct resource *res_irq = new_resource(dev, 1);
res_irq->base = irq;
res_irq->size = 1;
res_irq->flags = IORESOURCE_IRQ | IORESOURCE_FIXED |
IORESOURCE_STORED | IORESOURCE_ASSIGNED;
if (kempld_get_mutex(100) < 0)
return;
const uint8_t reg = uart ? KEMPLD_UART_1 : KEMPLD_UART_0;
const uint8_t val = kempld_read8(reg);
kempld_write8(reg,
(val & ~(KEMPLD_UART_IO_MASK | KEMPLD_UART_IRQ_MASK)) |
io << KEMPLD_UART_IO_SHIFT |
irq << KEMPLD_UART_IRQ_SHIFT);
kempld_release_mutex();
}
static void kempld_uart_enable_resources(struct device *dev)
{
if (kempld_get_mutex(100) < 0)
return;
const unsigned int uart = dev->path.generic.subid;
const uint8_t reg = uart ? KEMPLD_UART_1 : KEMPLD_UART_0;
kempld_write8(reg, kempld_read8(reg) | KEMPLD_UART_ENABLE);
kempld_release_mutex();
}
static struct device_operations kempld_uart_ops = {
.read_resources = kempld_uart_read_resources,
.enable_resources = kempld_uart_enable_resources,
};
static void kempld_enable_dev(struct device *const dev)
{
if (dev->path.type == DEVICE_PATH_GENERIC) {
switch (dev->path.generic.id) {
case 0:
if (dev->path.generic.subid < KEMPLD_NUM_UARTS) {
dev->ops = &kempld_uart_ops;
break;
}
__fallthrough;
case 1:
if (dev->path.generic.subid == 0) {
kempld_i2c_device_init(dev);
break;
}
__fallthrough;
default:
printk(BIOS_WARNING, "KEMPLD: Spurious device %s.\n", dev_path(dev));
break;
}
} else if (dev->path.type == DEVICE_PATH_GPIO) {
if (dev->path.gpio.id == 0) {
if (kempld_gpio_pads_config(dev) < 0)
printk(BIOS_ERR, "KEMPLD: GPIO configuration failed!\n");
} else {
printk(BIOS_WARNING, "KEMPLD: Spurious GPIO device %s.\n",
dev_path(dev));
}
}
}
struct chip_operations ec_kontron_kempld_ops = {
.name = "Kontron KEMPLD",
.enable_dev = kempld_enable_dev,
};
|
