src/drivers/uart/pl011.c


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79

/* SPDX-License-Identifier: GPL-2.0-only */

#include <device/mmio.h>
#include <boot/coreboot_tables.h>
#include <console/uart.h>
#include <drivers/uart/pl011.h>

void uart_init(unsigned int idx)
{
	struct pl011_uart *regs = uart_platform_baseptr(idx);
	uint32_t tmp;

	if (!regs)
		return;

	/* Disable UART */
	tmp = read32(&regs->cr);
	tmp &= ~PL011_UARTCR_UARTEN;
	write32(&regs->cr, tmp);

	/*
	 * Program Divisor
	 * As per: PL011 Technical reference manual:
	 * BAUDDIV = (Fuartclk / (16 * baud_rate))
	 * Considering 6 bits(64) for UARTFBRD
	 * BAUDDIV = (Fuartclk * 4 / baud_rate)
	 */
	tmp = uart_platform_refclk() * 4 / get_uart_baudrate();

	write32(&regs->ibrd, tmp >> 6);
	write32(&regs->fbrd, tmp & 0x3f);

	/* Program LINE Control 8n1, FIFO enable */
	tmp = read32(&regs->lcr_h);
	tmp |= PL011_LINE_CONTROL;
	write32(&regs->lcr_h, tmp);

	/* Enable UART */
	tmp = read32(&regs->cr);
	tmp |= PL011_UARTCR_UARTEN | PL011_UARTCR_RXE | PL011_UARTCR_TXE;
	write32(&regs->cr, tmp);
}

void uart_tx_byte(unsigned int idx, unsigned char data)
{
	struct pl011_uart *regs = uart_platform_baseptr(idx);

	write8(&regs->dr, data);
	uart_tx_flush(idx);
}

void uart_tx_flush(unsigned int idx)
{
	struct pl011_uart *regs = uart_platform_baseptr(idx);

	/* FIXME: add a timeout */
	while (!(read32(&regs->fr) & PL011_UARTFR_TXFE))
		;
}

unsigned char uart_rx_byte(unsigned int idx)
{
	struct pl011_uart *regs = uart_platform_baseptr(idx);

	while (read32(&regs->fr) & PL011_UARTFR_RXFE)
		;
	return read8(&regs->dr);
}

enum cb_err fill_lb_serial(struct lb_serial *serial)
{
	serial->type = LB_SERIAL_TYPE_MEMORY_MAPPED;
	serial->baseaddr = uart_platform_base(CONFIG_UART_FOR_CONSOLE);
	serial->baud = get_uart_baudrate();
	serial->regwidth = 4;
	serial->input_hertz = uart_platform_refclk();

	return CB_SUCCESS;
}