1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
|
/*
* This file is part of the coreboot project.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/early_variables.h>
#include <arch/io.h>
#include <commonlib/helpers.h>
#include <cpu/x86/tsc.h>
#include <pc80/i8254.h>
/* Initialize i8254 timers */
void setup_i8254(void)
{
/* Timer 0 (taken from biosemu) */
outb(TIMER0_SEL | WORD_ACCESS | MODE3 | BINARY_COUNT, TIMER_MODE_PORT);
outb(0x00, TIMER0_PORT);
outb(0x00, TIMER0_PORT);
/* Timer 1 */
outb(TIMER1_SEL | LOBYTE_ACCESS | MODE3 | BINARY_COUNT,
TIMER_MODE_PORT);
outb(0x12, TIMER1_PORT);
}
#if CONFIG(UDELAY_TIMER2)
static void load_timer2(unsigned int ticks)
{
/* Set up the timer gate, turn off the speaker */
outb((inb(PPC_PORTB) & ~PPCB_SPKR) | PPCB_T2GATE, PPC_PORTB);
outb(TIMER2_SEL | WORD_ACCESS | MODE0 | BINARY_COUNT, TIMER_MODE_PORT);
outb(ticks & 0xFF, TIMER2_PORT);
outb(ticks >> 8, TIMER2_PORT);
}
void udelay(int usecs)
{
load_timer2((usecs * TICKS_PER_MS) / 1000);
while ((inb(PPC_PORTB) & PPCB_T2OUT) == 0)
;
}
#endif
#define CLOCK_TICK_RATE 1193180U /* Underlying HZ */
/* ------ Calibrate the TSC -------
* Too much 64-bit arithmetic here to do this cleanly in C, and for
* accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
* output busy loop as low as possible. We avoid reading the CTC registers
* directly because of the awkward 8-bit access mechanism of the 82C54
* device.
*/
#define CALIBRATE_INTERVAL ((2*CLOCK_TICK_RATE)/1000) /* 2ms */
#define CALIBRATE_DIVISOR (2*1000) /* 2ms / 2000 == 1usec */
unsigned long calibrate_tsc_with_pit(void)
{
/* Set the Gate high, disable speaker */
outb((inb(0x61) & ~0x02) | 0x01, 0x61);
/*
* Now let's take care of CTC channel 2
*
* Set the Gate high, program CTC channel 2 for mode 0,
* (interrupt on terminal count mode), binary count,
* load 5 * LATCH count, (LSB and MSB) to begin countdown.
*/
outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
outb(CALIBRATE_INTERVAL & 0xff, 0x42); /* LSB of count */
outb(CALIBRATE_INTERVAL >> 8, 0x42); /* MSB of count */
{
tsc_t start;
tsc_t end;
unsigned long count;
start = rdtsc();
count = 0;
do {
count++;
} while ((inb(0x61) & 0x20) == 0);
end = rdtsc();
/* Error: ECTCNEVERSET */
if (count <= 1)
goto bad_ctc;
/* 64-bit subtract - gcc just messes up with long longs */
__asm__("subl %2,%0\n\t"
"sbbl %3,%1"
: "=a" (end.lo), "=d" (end.hi)
: "g" (start.lo), "g" (start.hi),
"0" (end.lo), "1" (end.hi));
/* Error: ECPUTOOFAST */
if (end.hi)
goto bad_ctc;
/* Error: ECPUTOOSLOW */
if (end.lo <= CALIBRATE_DIVISOR)
goto bad_ctc;
return DIV_ROUND_UP(end.lo, CALIBRATE_DIVISOR);
}
/*
* The CTC wasn't reliable: we got a hit on the very first read,
* or the CPU was so fast/slow that the quotient wouldn't fit in
* 32 bits..
*/
bad_ctc:
return 0;
}
#if CONFIG(UNKNOWN_TSC_RATE)
static u32 g_timer_tsc CAR_GLOBAL;
unsigned long tsc_freq_mhz(void)
{
u32 tsc;
tsc = car_get_var(g_timer_tsc);
if (tsc > 0)
return tsc;
tsc = calibrate_tsc_with_pit();
/* Set some semi-ridiculous rate if approximation fails. */
if (tsc == 0)
tsc = 5000;
car_set_var(g_timer_tsc, tsc);
return tsc;
}
#endif
|
