1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <delay.h>
#include <device/i2c_simple.h>
#include <edid.h>
#include <console/console.h>
#include <timer.h>
#include <dp_aux.h>
#include "ps8640.h"
int ps8640_get_edid(uint8_t bus, uint8_t chip, struct edid *out)
{
int ret;
u8 edid[EDID_LENGTH * 2];
int edid_size = EDID_LENGTH;
i2c_writeb(bus, chip + 2, PAGE2_I2C_BYPASS,
EDID_I2C_ADDR | I2C_BYPASS_EN);
ret = i2c_read_bytes(bus, EDID_I2C_ADDR, 0, edid, EDID_LENGTH);
if (ret != 0) {
printk(BIOS_INFO, "Failed to read EDID.\n");
return -1;
}
/* check if edid have extension flag, and read additional EDID data */
if (edid[EDID_EXTENSION_FLAG]) {
edid_size += EDID_LENGTH;
ret = i2c_read_bytes(bus, EDID_I2C_ADDR, EDID_LENGTH,
&edid[EDID_LENGTH], EDID_LENGTH);
if (ret != 0) {
printk(BIOS_INFO, "Failed to read EDID ext block.\n");
return -1;
}
}
if (decode_edid(edid, edid_size, out) != EDID_CONFORMANT) {
printk(BIOS_INFO, "Failed to decode EDID.\n");
return -1;
}
return 0;
}
int ps8640_init(uint8_t bus, uint8_t chip)
{
u8 set_vdo_done;
struct stopwatch sw;
mdelay(200);
stopwatch_init_msecs_expire(&sw, 200);
while (true) {
i2c_readb(bus, chip + 2, PAGE2_GPIO_H, &set_vdo_done);
if ((set_vdo_done & PS_GPIO9) == PS_GPIO9)
break;
if (stopwatch_expired(&sw)) {
printk(BIOS_INFO, "Failed to init ps8640.\n");
return -1;
}
mdelay(20);
}
mdelay(50);
/*
* The Manufacturer Command Set (MCS) is a device dependent interface
* intended for factory programming of the display module default
* parameters. Once the display module is configured, the MCS shall be
* disabled by the manufacturer. Once disabled, all MCS commands are
* ignored by the display interface.
*/
i2c_write_field(bus, chip + 2, PAGE2_MCS_EN, 0x0, MCS_EN_MASK,
MCS_EN_SHIFT);
i2c_writeb(bus, chip + 3, PAGE3_SET_ADD, VDO_CTL_ADD);
i2c_writeb(bus, chip + 3, PAGE3_SET_VAL, VDO_DIS);
i2c_writeb(bus, chip + 3, PAGE3_SET_ADD, VDO_CTL_ADD);
i2c_writeb(bus, chip + 3, PAGE3_SET_VAL, VDO_EN);
return 0;
}
static enum cb_err ps8640_bridge_aux_request(uint8_t bus,
uint8_t chip,
unsigned int target_reg,
unsigned int total_size,
enum aux_request request,
uint8_t *data)
{
int i;
uint32_t length;
uint8_t buf;
uint8_t reg;
int ret;
if (target_reg & ~SWAUX_ADDR_MASK)
return CB_ERR;
while (total_size) {
length = MIN(total_size, DP_AUX_MAX_PAYLOAD_BYTES);
total_size -= length;
ret = i2c_writeb(bus, chip, PAGE0_AUXCH_CFG3, AUXCH_CFG3_RESET);
if (ret)
return CB_ERR;
enum i2c_over_aux cmd = dp_get_aux_cmd(request, total_size);
if (i2c_writeb(bus, chip, PAGE0_SWAUX_ADDR_23_16,
(target_reg >> 16) | (cmd << 4)) ||
i2c_writeb(bus, chip, PAGE0_SWAUX_ADDR_15_8, target_reg >> 8) ||
i2c_writeb(bus, chip, PAGE0_SWAUX_ADDR_7_0, target_reg)) {
return CB_ERR;
}
if (dp_aux_request_is_write(request)) {
reg = PAGE0_SWAUX_WDATA;
for (i = 0; i < length; i++) {
ret = i2c_writeb(bus, chip, reg++, *data++);
if (ret)
return CB_ERR;
}
} else {
if (length == 0)
i2c_writeb(bus, chip, PAGE0_SWAUX_LENGTH, SWAUX_NO_PAYLOAD);
else
i2c_writeb(bus, chip, PAGE0_SWAUX_LENGTH, length - 1);
}
ret = i2c_writeb(bus, chip, PAGE0_SWAUX_CTRL, SWAUX_SEND);
if (ret)
return CB_ERR;
if (!wait_ms(100, !i2c_readb(bus, chip, PAGE0_SWAUX_CTRL, &buf) &&
!(buf & SWAUX_SEND)))
return CB_ERR;
if (i2c_readb(bus, chip, PAGE0_SWAUX_STATUS, &buf))
return CB_ERR;
switch (buf & SWAUX_STATUS_MASK) {
case SWAUX_STATUS_NACK:
case SWAUX_STATUS_I2C_NACK:
case SWAUX_STATUS_INVALID:
case SWAUX_STATUS_TIMEOUT:
return CB_ERR;
case SWAUX_STATUS_ACKM:
length = buf & SWAUX_M_MASK;
break;
}
if (length && !dp_aux_request_is_write(request)) {
reg = PAGE0_SWAUX_RDATA;
for (i = 0; i < length; i++) {
if (i2c_readb(bus, chip, reg++, &buf))
return CB_ERR;
*data++ = buf;
}
}
}
return CB_SUCCESS;
}
void ps8640_backlight_enable(uint8_t bus, uint8_t chip)
{
uint8_t val;
val = DP_BACKLIGHT_CONTROL_MODE_DPCD;
ps8640_bridge_aux_request(bus, chip, DP_BACKLIGHT_MODE_SET, 1,
DPCD_WRITE, &val);
val = 0xff;
ps8640_bridge_aux_request(bus, chip, DP_BACKLIGHT_BRIGHTNESS_MSB, 1,
DPCD_WRITE, &val);
val = DP_BACKLIGHT_ENABLE;
ps8640_bridge_aux_request(bus, chip, DP_DISPLAY_CONTROL_REGISTER, 1,
DPCD_WRITE, &val);
}
|
