blob: e47f466e1d423449e61ec6aa392ec0dc246dab43 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
|
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef __DRIVERS_I2C_NAU8825_CHIP_H__
#define __DRIVERS_I2C_NAU8825_CHIP_H__
#include <acpi/acpi_device.h>
#define NAU8825_MAX_BUTTONS 8
/*
* Nuvoton NAU8825 audio codec devicetree bindings
* linux/Documentation/devicetree/bindings/sound/nau8825.txt
*/
struct drivers_i2c_nau8825_config {
/* Interrupt configuration */
struct acpi_irq irq;
struct acpi_gpio irq_gpio;
/* I2C Bus Frequency in Hertz (default 400kHz) */
unsigned int bus_speed;
/* Enable jack detection via JKDET pin */
unsigned int jkdet_enable;
/* Enable JKDET pin pull if set, otherwise high impedance state */
unsigned int jkdet_pull_enable;
/* Pull-up JKDET pin if set, otherwise pull down */
unsigned int jkdet_pull_up;
/* JKDET pin polarity, 0 => active high, 1 => active low */
unsigned int jkdet_polarity;
/*
* VREF Impedance selection
* 0 - Open
* 1 - 25 kOhm
* 2 - 125 kOhm
* 3 - 2.5 kOhm
*/
unsigned int vref_impedance;
/* Button impedance measurement hysteresis */
unsigned int sar_hysteresis;
/*
* Reference voltage for button impedance measurement and micbias
* 0 - VDDA
* 1 - VDDA
* 2 - VDDA * 1.1
* 3 - VDDA * 1.2
* 4 - VDDA * 1.3
* 5 - VDDA * 1.4
* 6 - VDDA * 1.53
* 7 - VDDA * 1.53
*/
unsigned int micbias_voltage;
unsigned int sar_voltage;
/*
* SAR compare time
* 0 - 500 ns
* 1 - 1 us
* 2 - 2 us
* 3 - 4 us
*/
unsigned int sar_compare_time;
/*
* SAR sampling time
* 0 - 2 us
* 1 - 4 us
* 2 - 8 us
* 3 - 16 us
*/
unsigned int sar_sampling_time;
/*
* Button short key press debounce time
* 0 - 30 ms
* 1 - 50 ms
* 2 - 100 ms
* 3 - 30 ms
*/
unsigned int short_key_debounce;
/* Debounce time 2^(n+2) ms (0-7) for jack insert */
unsigned int jack_insert_debounce;
/* Debounce time 2^(n+2) ms (0-7) for jack eject */
unsigned int jack_eject_debounce;
/* Number of buttons supported, up to 8 */
unsigned int sar_threshold_num;
/*
* Impedance threshold for each button, up to 8
* SAR = 255 * micbias_voltage / sar_voltage * R / (2000 + R)
* R is Button impedance
*/
uint64_t sar_threshold[NAU8825_MAX_BUTTONS];
/* Make the drive strength of ADCOUT IO PIN strong if set.
* Otherwise, the drive keeps normal strength.
*/
bool adcout_ds;
};
#endif /* __DRIVERS_I2C_NAU8825_CHIP_H__ */
|
