1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/*
* This file is part of the coreboot project.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef DRIVERS_I2C_LM96000_CHIP_H
#define DRIVERS_I2C_LM96000_CHIP_H
#include <stdint.h>
#define LM96000_VIN_CNT 5
#define LM96000_TEMP_IN_CNT 3
#define LM96000_FAN_IN_CNT 4
#define LM96000_PWM_CTL_CNT 3
#define LM96000_TEMP_ZONE_CNT 3
enum lm96000_vin {
LM96000_2_5V = 0,
LM96000_VCCP = 1,
LM96000_3_3V = 2,
LM96000_5V = 3,
LM96000_12V = 4,
};
enum lm96000_fan_mode {
/* Bit 7 merely signifies that the mode is set, so we
can map the lower bits directly to register values. */
LM96000_FAN_IGNORE = 0x00,
LM96000_FAN_ZONE_1_AUTO = 0x80,
LM96000_FAN_ZONE_2_AUTO = 0x81,
LM96000_FAN_ZONE_3_AUTO = 0x82,
LM96000_FAN_ALWAYS_FULL = 0x83,
LM96000_FAN_DISABLED = 0x84,
LM96000_FAN_HOTTEST_23 = 0x85,
LM96000_FAN_HOTTEST_123 = 0x86,
LM96000_FAN_MANUAL = 0x87,
};
enum lm96000_pwm_freq {
LM96000_PWM_10HZ = 0,
LM96000_PWM_15HZ = 1,
LM96000_PWM_23HZ = 2,
LM96000_PWM_30HZ = 3,
LM96000_PWM_38HZ = 4,
LM96000_PWM_47HZ = 5,
LM96000_PWM_61HZ = 6,
LM96000_PWM_94HZ = 7,
LM96000_PWM_22_5KHZ = 8,
LM96000_PWM_24_0KHZ = 9,
LM96000_PWM_25_7KHZ = 10,
LM96000_PWM_27_7KHZ = 12,
LM96000_PWM_30_0KHZ = 14,
};
enum lm96000_tach_mode {
/* 0 will be used for kHz frequencies */
LM96000_TACH_MODE_1 = 1, /* use if TACHx isn't used with PWMx */
LM96000_TACH_MODE_2 = 2, /* use either 2 or 3 if TACHx matches PWMx */
LM96000_TACH_MODE_3 = 3,
};
enum lm96000_spinup_time {
LM96000_SPINUP_0MS = 0,
LM96000_SPINUP_100MS = 1,
LM96000_SPINUP_250MS = 2,
LM96000_SPINUP_400MS = 3,
LM96000_SPINUP_700MS = 4,
LM96000_SPINUP_1000MS = 5,
LM96000_SPINUP_2000MS = 6,
LM96000_SPINUP_4000MS = 7,
};
struct lm96000_fan_config {
enum lm96000_fan_mode mode;
int invert; /* invert PWM signal */
enum lm96000_spinup_time spinup;
enum lm96000_pwm_freq freq;
enum lm96000_tach_mode tach;
union {
u8 duty_cycle; /* duty cycle in manual mode */
u8 min_duty; /* minimum duty cycle */
};
};
struct lm96000_temp_zone {
u8 low_temp; /* temperature for min. duty cycle (in °C) */
u8 target_temp; /* temperature for 100% duty cycle (in °C) */
u8 panic_temp; /* temperature for 100% duty cycle on all fans */
/* This is tied to the zone in the implementation I tested
with. (Datasheet clearly states the opposite, that this
is tied to each PWM output so YMMV.) */
enum {
/* turn fan off below `low_temp - hysteresis` */
LM96000_LOW_TEMP_OFF = 0,
/* keep PWM at mininum duty cycle */
LM96000_LOW_TEMP_MIN = 1,
} min_off;
u8 hysteresis;
};
/* Implements only those parts currently used by coreboot mainboards. */
struct drivers_i2c_lm96000_config {
struct {
u16 low; /* in mV */
u16 high;
} vin[LM96000_VIN_CNT];
struct {
signed char low; /* in °C */
signed char high;
} temp_in[LM96000_TEMP_IN_CNT];
struct {
u16 low; /* in RPM */
} fan_in[LM96000_FAN_IN_CNT];
struct lm96000_fan_config fan[LM96000_PWM_CTL_CNT];
struct lm96000_temp_zone zone[LM96000_TEMP_ZONE_CNT];
};
#endif /* DRIVERS_I2C_LM96000_CHIP_H */
|
