1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* Driver for BayHub Technology LV2 PCI to SD bridge */
#include <console/console.h>
#include <device/device.h>
#include <device/path.h>
#include <device/pci.h>
#include <device/pciexp.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include "chip.h"
#include "lv2.h"
/*
* This chip has an errata where PCIe config space registers 0x234, 0x248, and
* 0x24C only support DWORD access, therefore reprogram these in the `finalize`
* callback.
*/
static void lv2_enable_ltr(struct device *dev)
{
u16 max_snoop, max_nosnoop;
if (!pciexp_get_ltr_max_latencies(dev, &max_snoop, &max_nosnoop))
return;
const unsigned int ltr_cap = pciexp_find_extended_cap(dev, PCIE_EXT_CAP_LTR_ID);
if (!ltr_cap)
return;
pci_write_config32(dev, ltr_cap + PCI_LTR_MAX_SNOOP, (max_snoop << 16) | max_nosnoop);
printk(BIOS_INFO, "%s: Re-programmed LTR max latencies using chip-specific quirk\n",
dev_path(dev));
}
static void lv2_enable(struct device *dev)
{
struct drivers_generic_bayhub_lv2_config *config = dev->chip_info;
pci_dev_init(dev);
if (!config || !config->enable_power_saving)
return;
/*
* This procedure for enabling power-saving mode is from the
* BayHub BIOS Implementation Guideline document.
*/
pci_write_config32(dev, LV2_PROTECT, LV2_PROTECT_OFF | LV2_PROTECT_LOCK_OFF);
pci_or_config32(dev, LV2_PCR_HEX_FC, LV2_PCIE_PHY_P1_ENABLE);
pci_update_config32(dev, LV2_PCR_HEX_E0, LV2_PCI_PM_L1_TIMER_MASK, LV2_PCI_PM_L1_TIMER);
pci_update_config32(dev, LV2_PCR_HEX_FC, LV2_ASPM_L1_TIMER_MASK, LV2_ASPM_L1_TIMER);
pci_or_config32(dev, LV2_PCR_HEX_A8, LV2_LTR_ENABLE);
pci_write_config32(dev, LV2_PCR_HEX_234, LV2_MAX_LATENCY_SETTING);
pci_update_config32(dev, LV2_PCR_HEX_3F4, LV2_L1_SUBSTATE_OPTIMISE_MASK,
LV2_L1_SUBSTATE_OPTIMISE);
pci_update_config32(dev, LV2_PCR_HEX_300, LV2_TUNING_WINDOW_MASK, LV2_TUNING_WINDOW);
pci_update_config32(dev, LV2_PCR_HEX_304, LV2_DRIVER_STRENGTH_MASK,
LV2_DRIVER_STRENGTH);
pci_update_config32(dev, LV2_PCR_HEX_308, LV2_RESET_DMA_DISABLE_MASK,
LV2_RESET_DMA_DISABLE);
pci_write_config32(dev, LV2_PROTECT, LV2_PROTECT_ON | LV2_PROTECT_LOCK_ON);
printk(BIOS_INFO, "BayHub LV2: Power-saving enabled\n");
}
static struct device_operations lv2_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.ops_pci = &pci_dev_ops_pci,
.enable = lv2_enable,
.final = lv2_enable_ltr,
};
static const unsigned short pci_device_ids[] = {
PCI_DID_O2_LV2,
0
};
static const struct pci_driver bayhub_lv2 __pci_driver = {
.ops = &lv2_ops,
.vendor = PCI_VID_O2,
.devices = pci_device_ids,
};
struct chip_operations drivers_generic_bayhub_lv2_ops = {
CHIP_NAME("BayHub Technology LV2 PCIe to SD bridge")
};
|
