1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Google Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define __SIMPLE_DEVICE__
#include <device/pci.h>
#include <device/pci_def.h>
#include <device/pci_ops.h>
#include <device/pci_type.h>
#include <delay.h>
static void pci_bridge_reset_secondary(pci_devfn_t p2p_bridge)
{
u16 reg16;
/* First we reset the secondary bus. */
reg16 = pci_read_config16(p2p_bridge, PCI_BRIDGE_CONTROL);
reg16 |= (1 << 6); /* SRESET */
pci_write_config16(p2p_bridge, PCI_BRIDGE_CONTROL, reg16);
/* Assume we don't have to wait here forever */
/* Read back and clear reset bit. */
reg16 = pci_read_config16(p2p_bridge, PCI_BRIDGE_CONTROL);
reg16 &= ~(1 << 6); /* SRESET */
pci_write_config16(p2p_bridge, PCI_BRIDGE_CONTROL, reg16);
}
static void pci_bridge_set_secondary(pci_devfn_t p2p_bridge, u8 secondary)
{
/* Disable config transaction forwarding. */
pci_write_config8(p2p_bridge, PCI_SECONDARY_BUS, 0x00);
pci_write_config8(p2p_bridge, PCI_SUBORDINATE_BUS, 0x00);
/* Enable config transaction forwarding. */
pci_write_config8(p2p_bridge, PCI_SECONDARY_BUS, secondary);
pci_write_config8(p2p_bridge, PCI_SUBORDINATE_BUS, secondary);
}
static void pci_bridge_set_mmio(pci_devfn_t p2p_bridge, u32 base, u32 size)
{
u16 reg16;
/* Disable MMIO window behind the bridge. */
reg16 = pci_read_config16(p2p_bridge, PCI_COMMAND);
reg16 &= ~PCI_COMMAND_MEMORY;
pci_write_config16(p2p_bridge, PCI_COMMAND, reg16);
pci_write_config32(p2p_bridge, PCI_MEMORY_BASE, 0x10);
if (!size)
return;
/* Enable MMIO window behind the bridge. */
pci_write_config32(p2p_bridge, PCI_MEMORY_BASE,
((base + size - 1) & 0xfff00000) | ((base >> 16) & 0xfff0));
reg16 = pci_read_config16(p2p_bridge, PCI_COMMAND);
reg16 |= PCI_COMMAND_MEMORY;
pci_write_config16(p2p_bridge, PCI_COMMAND, reg16);
}
void pci_early_mmio_window(pci_devfn_t p2p_bridge, u32 mmio_base, u32 mmio_size)
{
int timeout, ret = -1;
/* Secondary bus number is mostly irrelevant as we disable
* configuration transactions right after the probe.
*/
u8 secondary = 15;
u8 dev = 0;
/* Enable configuration and MMIO over bridge. */
pci_bridge_reset_secondary(p2p_bridge);
pci_bridge_set_secondary(p2p_bridge, secondary);
pci_bridge_set_mmio(p2p_bridge, mmio_base, mmio_size);
for (timeout = 20000; timeout; timeout--) {
u32 id = pci_read_config32(PCI_DEV(secondary, dev, 0), PCI_VENDOR_ID);
if (id != 0 && id != 0xffffffff && id != 0xffff0001)
break;
udelay(10);
}
if (timeout != 0)
ret = pci_early_device_probe(secondary, dev, mmio_base);
/* Disable MMIO window if we found no suitable device. */
if (ret)
pci_bridge_set_mmio(p2p_bridge, 0, 0);
/* Resource allocator will reconfigure bridges and secondary bus
* number may change. Thus early device cannot reliably use config
* transactions from here on, so we may as well disable them.
*/
pci_bridge_set_secondary(p2p_bridge, 0);
}
void pci_early_bridge_init(void)
{
/* No PCI-to-PCI bridges are enabled yet, so the one we try to
* configure must have its primary on bus 0.
*/
pci_devfn_t p2p_bridge = PCI_DEV(0, CONFIG_EARLY_PCI_BRIDGE_DEVICE,
CONFIG_EARLY_PCI_BRIDGE_FUNCTION);
pci_early_mmio_window(p2p_bridge, CONFIG_EARLY_PCI_MMIO_BASE, 0x4000);
}
/* FIXME: A lot of issues using the following, please avoid.
* Assumes 256 PCI busses, scans them all even when PCI bridges are still
* disabled. Probes all functions even if 0 is not present.
*/
pci_devfn_t pci_locate_device(unsigned int pci_id, pci_devfn_t dev)
{
for (; dev <= PCI_DEV(255, 31, 7); dev += PCI_DEV(0, 0, 1)) {
unsigned int id;
id = pci_read_config32(dev, 0);
if (id == pci_id)
return dev;
}
return PCI_DEV_INVALID;
}
pci_devfn_t pci_locate_device_on_bus(unsigned int pci_id, unsigned int bus)
{
pci_devfn_t dev, last;
dev = PCI_DEV(bus, 0, 0);
last = PCI_DEV(bus, 31, 7);
for (; dev <= last; dev += PCI_DEV(0, 0, 1)) {
unsigned int id;
id = pci_read_config32(dev, 0);
if (id == pci_id)
return dev;
}
return PCI_DEV_INVALID;
}
|
