1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Samsung Electronics
* Copyright 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <arch/io.h>
#include <delay.h>
#include "gpio.h"
#include "power.h"
#include "cpu.h"
#include "usb.h"
#include "chip.h"
/* Enable VBUS */
static int usb_vbus_init(int vbus_gpio)
{
/* Enable VBUS power switch */
gpio_direction_output(GPIO_X11, 1);
/* VBUS turn ON time */
mdelay(3);
return 0;
}
/* Setup the EHCI host controller. */
static void setup_usb_phy(struct usb_phy *usb, int hsic_gpio)
{
unsigned int hostphy_ctrl0;
power_enable_usb_phy();
/* Setting up host and device simultaneously */
hostphy_ctrl0 = readl(&usb->usbphyctrl0);
hostphy_ctrl0 &= ~(HOST_CTRL0_FSEL_MASK | HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
hostphy_ctrl0 |= ( /* Setting up the ref freq */
CLK_24MHZ << 16 |
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
writel(hostphy_ctrl0, &usb->usbphyctrl0);
udelay(10);
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_LINKSWRST | HOST_CTRL0_UTMISWRST);
udelay(20);
/* EHCI Ctrl setting */
setbits_le32(&usb->ehcictrl,
EHCICTRL_ENAINCRXALIGN |
EHCICTRL_ENAINCR4 |
EHCICTRL_ENAINCR8 | EHCICTRL_ENAINCR16);
/* HSIC USB Hub initialization. */
// FIXME board specific?
gpio_direction_output(hsic_gpio, 0);
udelay(100);
gpio_direction_output(hsic_gpio, 1);
udelay(5000);
clrbits_le32(&usb->hsicphyctrl1,
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESLEEP |
HOST_CTRL0_FORCESUSPEND);
setbits_le32(&usb->hsicphyctrl1, HOST_CTRL0_PHYSWRST);
udelay(10);
clrbits_le32(&usb->hsicphyctrl1, HOST_CTRL0_PHYSWRST);
/* At this point we need to wait for 50ms before talking to
* the USB controller (PHY clock and power setup time)
* By the time we are actually in the payload, these 50ms
* will have passed.
*/
}
void usb_init(device_t dev)
{
struct usb_phy *usb;
struct cpu_samsung_exynos5250_config *conf = dev->chip_info;
usb_vbus_init(conf->usb_vbus_gpio);
usb = (struct usb_phy *) samsung_get_base_usb_phy();
setup_usb_phy(usb, conf->usb_hsic_gpio);
}
|
