1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <cpu/x86/mtrr.h>
#include <cpu/amd/msr.h>
#include <cpu/amd/mtrr.h>
#include <northbridge/amd/agesa/agesa_helper.h>
#include <Porting.h>
#include <AGESA.h>
#include <amdlib.h>
void amd_initcpuio(void)
{
UINT64 MsrReg;
UINT32 PciData;
PCI_ADDR PciAddress;
AMD_CONFIG_PARAMS StdHeader;
/* Enable legacy video routing: D18F1xF4 VGA Enable */
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xF4);
PciData = 1;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* The platform BIOS needs to ensure the memory ranges of SB800 legacy
* devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are
* set to non-posted regions.
*/
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x84);
/* last address before processor local APIC at FEE00000 */
PciData = 0x00FEDF00;
/* set NP (non-posted) bit */
PciData |= 1 << 7;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x80);
/* lowest NP address is HPET at FED00000 */
PciData = (0xFED00000 >> 8) | 3;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Map the remaining PCI hole as posted MMIO */
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x8C);
PciData = 0x00FECF00; /* last address before non-posted range */
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
LibAmdMsrRead(TOP_MEM, &MsrReg, &StdHeader);
MsrReg = (MsrReg >> 8) | 3;
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x88);
PciData = (UINT32)MsrReg;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Send all IO (0000-FFFF) to southbridge. */
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC4);
PciData = 0x0000F000;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC0);
PciData = 0x00000003;
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
}
void amd_initmmio(void)
{
UINT64 MsrReg;
UINT32 PciData;
PCI_ADDR PciAddress;
AMD_CONFIG_PARAMS StdHeader;
/*
* Set the MMIO Configuration Base Address and
* Bus Range onto MMIO configuration base
* Address MSR register.
*/
MsrReg = CONFIG_MMCONF_BASE_ADDRESS |
(LibAmdBitScanReverse(CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
LibAmdMsrWrite(MMIO_CONF_BASE, &MsrReg, &StdHeader);
/* For serial port */
PciData = 0xFF03FFD5;
PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x14, 0x3, 0x44);
LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Set ROM cache onto WP to decrease post time */
MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull;
LibAmdMsrWrite(MTRR_PHYS_BASE(6), &MsrReg, &StdHeader);
MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull;
LibAmdMsrWrite(MTRR_PHYS_MASK(6), &MsrReg, &StdHeader);
if (CONFIG(UDELAY_LAPIC)) {
LibAmdMsrRead(0x1B, &MsrReg, &StdHeader);
MsrReg |= 1 << 11;
LibAmdMsrWrite(0x1B, &MsrReg, &StdHeader);
}
}
|
