1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <acpi/acpigen_extern.asl>
#if CONFIG(CHROMEOS_NVS)
/* ChromeOS specific */
#include <vendorcode/google/chromeos/acpi/chromeos.asl>
#endif
/* Operating system enumeration. */
Name (OSYS, 0)
/* 0 => PIC mode, 1 => APIC Mode */
Name (PICM, 0)
/* Power state (AC = 1) */
Name (PWRS, 1)
/*
* The _PIC method is called by the OS to choose between interrupt
* routing via the i8259 interrupt controller or the APIC.
*
* _PIC is called with a parameter of 0 for i8259 configuration and
* with a parameter of 1 for Local Apic/IOAPIC configuration.
*/
Method (_PIC, 1)
{
/* Remember the OS' IRQ routing choice. */
PICM = Arg0
}
#if CONFIG(ECAM_MMCONF_SUPPORT)
Scope(\_SB) {
/* Base address of PCIe config space */
Name(PCBA, CONFIG_ECAM_MMCONF_BASE_ADDRESS)
/* Length of PCIe config space, 1MB each bus */
Name(PCLN, CONFIG_ECAM_MMCONF_LENGTH)
/* PCIe Configuration Space */
OperationRegion(PCFG, SystemMemory, PCBA, PCLN) /* Each bus consumes 1MB */
/* From the Linux documentation (Documentation/PCI/acpi-info.rst):
* [6] PCI Firmware 3.2, sec 4.1.2:
* If the operating system does not natively comprehend reserving the
* MMCFG region, the MMCFG region must be reserved by firmware. The
* address range reported in the MCFG table or by _CBA method (see Section
* 4.1.3) must be reserved by declaring a motherboard resource. For most
* systems, the motherboard resource would appear at the root of the ACPI
* namespace (under \_SB) in a node with a _HID of EISAID (PNP0C02), and
* the resources in this case should not be claimed in the root PCI bus's
* _CRS. The resources can optionally be returned in Int15 E820 or
* EFIGetMemoryMap as reserved memory but must always be reported through
* ACPI as a motherboard resource.
*/
Device (PERC) // PCI ECAM Resource Consumption
{
Name (_HID, EisaId("PNP0C02"))
Method (_CRS, 0, Serialized)
{
Name (RBUF, ResourceTemplate ()
{
QWordMemory (ResourceConsumer, PosDecode, MinFixed, MaxFixed,
NonCacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000000000000000, // _MIN
0x0000000000000001, // _MAX
0x0000000000000000, // Translation
0x0000000000000002, // _Len
,, _Y00, AddressRangeMemory, TypeStatic)
})
CreateQWordField (RBUF, \_SB.PERC._CRS._Y00._MIN, MIN1)
CreateQWordField (RBUF, \_SB.PERC._CRS._Y00._MAX, MAX1)
CreateQWordField (RBUF, \_SB.PERC._CRS._Y00._LEN, LEN1)
MIN1 = CONFIG_ECAM_MMCONF_BASE_ADDRESS
MAX1 = (MIN1 + CONFIG_ECAM_MMCONF_LENGTH -1)
LEN1 = CONFIG_ECAM_MMCONF_LENGTH
Return (RBUF)
}
}
}
#endif
|
