summaryrefslogtreecommitdiff
path: root/util/inteltool
AgeCommit message (Collapse)Author
2017-04-15util/inteltool: Add ICH10 (Consumer Base) supportArthur Heymans
Reuses ICH10R functions. TESTED on Intel DG43GT (Not supported by coreboot) Change-Id: If9ae8ba8b95e3a7bf6596ae639eb8cafab583298 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19232 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-03util/inteltool: Add ICH6-10 to BIOS_CNTL listArthur Heymans
Without this change inteltool cannot read BIOS_CNTL values nor can it read the SPIBAR values. Change-Id: I9ff16e060aca66e3cb11c8315a6843ccecd1d3c2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17979 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03util/inteltool: Fix ICH SPIBAR registersArthur Heymans
The ICH7 SPIBAR offset and registers are different from later generation. ICH8 has a different offset from later generation. ICH6 has no SPI controller. Change-Id: I7691bce619089b15805114047bcb1fd121a5722b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17978 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-21util/inteltool: Fix bay trail ahci deviceMarshall Dawson
Use a unique bus/device/function if a bay trail LPC bridge was found. TEST=Run on MinnowBoard MAX Turbot and customer's LynxPoint-LP. Change-Id: Ib4b50aaf9817ac94f46c28925081540676226d84 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17464 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-20util/inteltool: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: Id42a2901cf76e6b867f62a752a38bbd6f6e5f54e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17059 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-20util/inteltool: Use tabs for indentsElyes HAOUAS
Change-Id: I9d27c276053c51021166f4b22d150060e415d08f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17025 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-09-21inteltool: add --ahci for printing AHCI registersIru Cai
According to datasheets for Intel ICH/PCH, it works for chipsets from ICH7 to 9-series PCH, with PCI device address D31:F2. Change-Id: If1ddd7208108bda949b5a94894a7bf9e8bfe1e5f Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/15106 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31util/inteltool: fix memory leakPatrick Georgi
A struct pci_dev was allocated but not freed. Change-Id: I6a8bbef6a118fc1f0aa7037e72c4d0dda9208f4b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1353037 Reviewed-on: https://review.coreboot.org/15971 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28util: Correct typo in MSR_EBC_SOFT_POWERONElyes HAOUAS
Change-Id: Iba5fc92d8740d0bb7d41f8a83513ba7fb97be592 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15900 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-08inteltool: handle unsafe dumping of graphics registersStefan Tauner
The current implementation from Vladimir simply dumps 1 MB of memory contents starting at the base address of the second PCI device (which most likely is the VGA controller on Intel systems). This locks up a number of different systems, e.g. my Ibex Peak-based T410s. This patch documents the issue and stops dumping the graphics registers for the -a/--all parameter. Change-Id: I581bdc63db60afaf4792bc11fbeed73aab57f63a Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/14627 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-05-13inteltool: update documentationStefan Tauner
- manpage - usage message - new warning message if -S is used on an unsupported chipset Change-Id: I1acaa5f4232b65244ec00fd22ec7460d9cc387f1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/14624 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-01-13utils: Remove old license text from help & disclaimer fileMartin Roth
The license text that we decided to remove was removed from the headers of these files, but was still left in the help text. Remove it from those locations as well. Change-Id: I0e1b3b79f1afa35e632c4a4dd09a8bf2b02eaa6d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12913 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07inteltool: add NetBSD compatibilityAndrey Korolyov
Tested on NetBSD-7.0/i386 Change-Id: I6a693633d3a80ea07ade233b1b4fd1c5a1412032 Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Reviewed-on: https://review.coreboot.org/12835 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-24util: Update makefiles for junit testingMartin Roth
- Have clean remove junit.xml files. - Remove junit.xml target from cbmem makefile - this is in the top level Makefile.inc now. - add distclean targets to makefiles. - Make sure all makefiles have .PHONY set up. - rm commands need -f or they will fail if the file they're trying to remove doesn't exist, causing the build to fail. Change-Id: I2f0635f2c0a9417e3377a90c8d67103323c4a72f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12120 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11inteltool: Add function to generate SPD dump.Vladimir Serbinenko
E.g. on my MacbookAir to generate spd.bin to be used with coreboot I do: ./inteltool -S spd.bin Change-Id: If165475ed3e1f3262a8926ef619128d25b1e2896 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11847 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-08-30inteltool: Add Intel 4-Series chipset detectionDamien Zammit
Previously, X4X was incorrectly named because it provides support for SKUs within XX4X range. This is renamed. This patch provides support for all X4X SKUs according to datasheet Intel 4 Series Chipset Family Specification Update, namely: Q45, Q43, P45, P43, G45, G43, G41 and B43 (both versions). Tested on Gigabyte GA-G41M-ES2L Change-Id: I032265e80d9ca51e2fef29201280832ea3210a0b Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/11245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-08-26inteltool: fix build for FreeBSDRoger Pau Monne
Replace usage of u<bitness> types with proper uint<bitness>_t types. Change-Id: I8359d70304a138b29bfc1358af77af26b2bc8682 Signed-off-by: Roger Pau Monne <roger.pau@citrix.com> Reviewed-on: http://review.coreboot.org/11364 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-28Remove address from GPLv2 headersPatrick Georgi
Follow up for commit b890a12, some contributions brought back a number of FSF addresses, so get rid of them again. Change-Id: I0ac0c957738ce512deb0ed82b2219ef90d96d46b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10322 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-25inteltool: dump gfx registers.Vladimir Serbinenko
Useful for autoport and other gfx-related developpement. Change-Id: I1fc0952bc30ab15cd39a4f0c00649714dcf318f3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10276 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-16util/inteltool: add Broadwell-U supportMatt DeVillier
add handling of PCI IDs for Broadwell-U/Wildcat Point LP, using same functions as Haswell-U/Lynx Point LP Change-Id: I1094cbdace3c73f0f85c2e27c676b877b1a04bfe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: http://review.coreboot.org/10209 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-03-26inteltool: add ICH8M-E supportLubomir Rintel
Tested on a Lenovo X61. Change-Id: I047f5a029d9be9fe6a000e2b45be44c7f14b33d7 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: http://review.coreboot.org/8568 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-10util/inteltool: Support reading RCBA of NM70 southbridgeAlexandru Gagniuc
Change-Id: Ia90f967a4988214c719f374a49233bb6fade11b0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8481 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-08inteltool: add `-s` to dump spi bar and bios_cntl registersAlexander Couzens
Change-Id: I3bb5dc23885af8c992456ee5e4bd374cd4b813bf Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8049 Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-16inteltool: Start adding Bay TrailMartin Roth
- Add silvermont (Bay Trail core) MSRs - these are shared with rangeley/avoton. - Add GPIO values and GPIO muxing information. - Add Bay Trail to the PM list. Still to do: - Northbridge functionality (RCBA, Memory timings, etc.) - Add Graphics registers Change-Id: I9fe0c0f1efe5f4344aeb3bad3f13037555109060 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7711 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-09utils: Remove references to tracker from manpagesMartin Roth
abuild, inteltool, and superiotool's manpages still referenced reporting bugs to tracker.coreboot.org. Remove that url and change the message to point to the coreboot mailing list instead. Change-Id: I7a85bc2b36ccdb7f3798a39a08345c1a02a67e65 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7712 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-09inteltool: add more hardware IDs and PCIEXBAR/PXPEPBAR read supportFelix Held
Add IDs of some SNB and Haswell chips; use more descriptive names. Add PCIEXBAR and PXPEPBAR read support for SNB/IVB/Haswell. Change-Id: I16753bf90061fc2065b813b1c2169e7b7bcc89e8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/7360 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2014-11-06inteltool: Fix message in case of multiple LPC controllersMathias Krause
If we find multiple LPC controllers, we want to tell the user that we'll ignore all but the first. However, we use 'dev' in the message (the current device found) instead of 'sb' (the one we want to use). Fix the message by using 'sb' and break the loop right away in this case. It's sufficient to tell the user once which LPC controller we'll use. Change-Id: Ibd27e40525fabe8c63b112691ad49fd994c70a48 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: http://review.coreboot.org/7342 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-11-06inteltool: Add support for Sandy Bridge desktop processorsFelix Held
Change-Id: I5e68b89c30d5550e4bce5c3e4c7b0689c38756bc Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/7337 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Mathias Krause <minipli@googlemail.com>
2014-11-05inteltool: Show more info on sandy/ivy.Vladimir Serbinenko
Change-Id: I408614e743ab6f0f447b327c01d8f4dacf787124 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6692 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-04inteltool/sandybridge: Kill mch_registers codepath.Vladimir Serbinenko
It never worked. Change-Id: Ic68614bb8ed481babf54b4f9d8db00635755f4d1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7324 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-04inteltool: Add support for Haswell ULT and Lynx Point LPDennis Wassenberg
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Change-Id: I2d5a31c831afeb92522b2673fde82922dc4efca5 Reviewed-on: http://review.coreboot.org/7275 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-11-02inteltool: refine GPIO and PMBASE/TCO printing on Ibex Peak/5 SeriesStefan Tauner
Nicolas Reinecke was noticing that in my Lenovo T410s logs the GPIO*3 settings were missing. This led to some investigation and this patch, thanks! Change-Id: I7ba28aa00d10f988a7fe81e61d2e216b54a11006 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/7239 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-08-26util/inteltool: fix typoIdwer Vollering
Change-Id: I8c30742f6cd759dce4c9641edad107d9e3154975 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/6766 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-13util/inteltool: Typo in dump output for 'GP_IO_SEL3'Edward O'Callaghan
The GPIO offset of '0x44 - GP_IO_SEL3' as specified in the pch.h header is incorrectly reported as 'GPIO_SEL3'. Change-Id: I56dcdda109d5f57ed45938d60b995807bdfb46b1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6459 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-11util/inteltool: Add pci ids for 4 northbridge models instead of 1.Damien Zammit
This patch supports northbridges: 0x0150 0x0154 0x0158 0x015c as 3rd gen core. Tested on 0x0150 (0x0154 previously only model). Change-Id: I53a33d864494dd4ac1cb9e8330450f56001ed92c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/5873 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-01-31utils: Install man pages as non-executable (chmod 644)Lubomir Rintel
This bothers rpmlint. Change-Id: I27d9cfac3ef6834ff87acc5a5ccbf332e59eeb1a Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: http://review.coreboot.org/5075 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-07-23inteltool: Print raw CPUID and make hexadecimal values unambiguousDamien Zammit
The raw CPUID is useful for matching the directories under 'src/cpu/intel' and is not easy to find out otherwise because it is most often decoded already. The decoded values are not obviously hexadecimal so prepend them with 0x to make sure they are unambiguous. The output differences look like this: - CPU: Processor Type: 0, Family 6, Model 25, Stepping 2 + CPU: ID 0x20652, Processor Type 0x0, Family 0x6, Model 0x25, Stepping 0x2 Change-Id: Id47f0b00f8db931f0000451c8f63ac1e966442c4 Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3788 Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Tested-by: build bot (Jenkins)
2013-06-23inteltool: add initial support for NehalemStefan Tauner
Also, add pretty printing of Westmere's DMI registers (tested on my t410s by staring at non-zero output values :) Apparently Nehalem does not have a MEMBAR? But there are some documented memory controller control registers in PCI configuration space... left out for now. The PCIEXBAR is not documented publicly AFAICT, but there is a similar register on a device on bus 0xFF. phcoder might know more... Change-Id: I5faadb6e4f701728f5290276c02809b4993bd86d Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3505 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-13util/inteltool: Add support for other 5 chipsetsStefan Tauner
e4e8e090fa36cb3a098e1ddf0ea44c796c140572 does add support for QM57, but there are many more that should work with that code(?). Does not explode on... CPU: Processor Type: 0, Family 6, Model 25, Stepping 2 Northbridge: 8086:0044 (1st generation (Westmere family) Core Processor) Southbridge: 8086:3b0f (QS57) Change-Id: I85e15ba45678a5bd635415a7a8d69c05bff8f7ef Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3321 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-05-27util/inteltool: Add support for mobile 5 chipsetVladimir Serbinenko
Dump registers on mobile 5. Successfully tested on X201. Change-Id: I606371801d3ae6c96d3d404c9775c254bd0ffbc9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/2993 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-04-15inteltool: pcie.c: Use `0xffULL` instead of `0xff` to avoid shift overflowPaul Menzel
When building inteltool with Clang, it warns about the following. $ clang --version Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2) Target: i386-pc-linux-gnu Thread model: posix $ CC=clang make […] clang -O2 -g -Wall -W -c -o pcie.o pcie.c pcie.c:297:40: warning: signed shift result (0xFF0000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] pciexbar_phys = pciexbar_reg & (0xff << 28); ~~~~ ^ ~~ pcie.c:301:41: warning: signed shift result (0xFF8000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] pciexbar_phys = pciexbar_reg & (0x1ff << 27); ~~~~~ ^ ~~ pcie.c:305:41: warning: signed shift result (0xFFC000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] pciexbar_phys = pciexbar_reg & (0x3ff << 26); ~~~~~ ^ ~~ 3 warnings generated. […] Specifying the length by using the suffix `0xffULL` fixes these issues as now enough bits are available. These issues were introduced in commit 1162f25a [1]. commit 1162f25a49e8f39822123d664cda10fef466b351 Author: Stefan Reinauer <stepan@coresystems.de> Date: Thu Dec 4 15:18:20 2008 +0000 Patch to util/inteltool: * PMBASE dumping now knows the registers. * Add support for i965, i975, ICH8M * Add support for Darwin OS using DirectIO [1] http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=1162f25a49e8f39822123d664cda10fef466b351 Change-Id: I7b9a15b04ef3bcae64e06266667597d0f9f07b79 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3015 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-14inteltool: Use portable type `uint64_t` instead of `u64`Paul Menzel
In [1] Idwer Vollering noted, that the type `u64` is not portable so on his FreeBSD system, the following warning is shown. $ clang -O2 -Wall -W -I/usr/local/include -c -o amb.o amb.c amb.c:441:22: error: use of undeclared identifier 'u64' ambconfig_phys = ((u64)pci_read_long(dev16, 0x4c) << 32) | The type `uint64_t` seems to be defined also on FreeBSD, so using this fixes the warning. Note, this warning is not reproducable with Debian Sid/unstable for example. I have no idea why though. [1] http://review.coreboot.org/#/c/3015/ Change-Id: Ic22f4371114b68ae8221d84a01fef6888d43f365 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3086 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08inteltool: remove unused file descriptor variable and ifdefsStefan Tauner
Change-Id: I6a119b1f362f481914377e8d14c713159f895130 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3030 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-05inteltool: use inttypes for prints in memory.cStefan Tauner
This fixes at least one warning on my machine where "llx" is replaced by PRIx64. Change-Id: Iee3e5027d327d4d5f8e6d8b2d53d051f74bfc354 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3024 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-05inteltool: cpu.c: Use conversion specifier `u` for unsigned integersPaul Menzel
Cppcheck [1], a static code analysis tool, warns about the following. $ cppcheck --version Cppcheck 1.59 $ cppcheck --enable=all . […] Checking cpu.c... [cpu.c:951]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list. [cpu.c:962]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list. […] And indeed, `core` is an unsigned integer and `man 3 printf` tells the following about conversion specifiers. d, i The int argument is converted to signed decimal notation. […] o, u, x, X The unsigned int argument is converted to unsigned octal (o), unsigned decimal (u), or unsigned hexadecimal (x and X) notation. So use `u` and Cppcheck does not complain anymore. [1] http://cppcheck.sourceforge.net/ Change-Id: If8dd8d0efe75fcb4af2502ae5100e3f2062649e4 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3026 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-04inteltool: Cast to `intptr_t` instead of `uint64_t`Paul Menzel
When building inteltool under x86-32, the following warnings are shown. $ gcc --version gcc-4.7.real (Debian 4.7.2-15) 4.7.2 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ make […] amb.c: In function ‘amb_read_config32’: amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] amb.c: In function ‘amb_read_config16’: amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] amb.c: In function ‘amb_read_config8’: amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] […] Nico Huber commented the following [1]. I don't see those warnings because I build for x86-64. I guess they could be fixed by casting to `ptrdiff_t` (from stddef.h) instead of `uint64_t`. And indeed, using `ptrdiff_t` fixes the warning. But as Stefan Reinauer commented in [2], `intptr_t` is more appropriate as this is just a pointer and no pointer difference. So `intptr_t` is taken, which fixes these issues warned about too. These warnings were introduced in commit »inteltool: Add support for dumping AMB registers« (4b7b320f) [3]. [1] http://review.coreboot.org/#/c/2996/1//COMMIT_MSG [2] http://review.coreboot.org/#/c/3002/1/util/inteltool/amb.c [3] http://review.coreboot.org/525 Change-Id: I2ea1a31dc1e3db129e767d6a9e0433fd75a77d0f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3002 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-04-03inteltool: Use `ll` instead of `l` as the length modifier for `uint64_t`Paul Menzel
When buidling inteltool with GCC, the following warning is printed. $ make […] gcc -O2 -g -Wall -W -c -o memory.o memory.c memory.c: In function ‘print_mchbar’: memory.c:287:7: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘uint64_t’ [-Wformat] […] This was introduced in commit »inteltool: Add support for H65 Express chipset« (c7fc4422) [1]. Address this warning, by using `%llx` instead of `%lx`. [1] http://review.coreboot.org/1258 Change-Id: I4f714edce7e8b405e1a7a417d02fa498322c88a8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2994 Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Tested-by: build bot (Jenkins)
2013-04-01inteltool: Allow to override Makefile variablesPaul Menzel
Allow to override the variables `CC`, `INSTALL`, `PREFIX`, `CFLAGS` and `LDFLAGS`. Though append `-lpci -lz` to `LDFLAGS`. This way for example a different compiler can easily be used. CC=clang make As a side note, Clang in contrast to GCC does *not* issue the following warnings. $ clang --version Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2) Target: i386-pc-linux-gnu Thread model: posix $ gcc --version gcc-4.7.real (Debian 4.7.2-15) 4.7.2 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ make […] amb.c: In function ‘amb_read_config32’: amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] amb.c: In function ‘amb_read_config16’: amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] amb.c: In function ‘amb_read_config8’: amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] […] These are only shown under 32-bit and not 64-bit $ uname -m i686 and are going to be fixed in a separate patch. Change-Id: Id75dea081ecb35390f283520a7e5dce520f4c98d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2996 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01inteltool: Add Cougar/Panther Point GPIO defaultsNico Huber
This adds default values for the GPIO setup on Intel's Cougar Point and Panther Point platform controller hubs (PCH). Values are taken from [1] and [2], respectively. I've tested this with an H77 PCH. See below for the output. [1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet Document-Number: 324645-006 [2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) - Datasheet Document-Number: 326776-003 $ ./inteltool -G CPU: Processor Type: 0, Family 6, Model 3a, Stepping 9 Northbridge: 8086:0150 (unknown) Southbridge: 8086:1e4a (H77) ========== GPIO DIFFS =========== GPIOBASE = 0x0500 (IO) gpiobase+0x0000: 0xb96ba1fb (GPIO_USE_SEL) gpiobase+0x0000: 0xb96ba1ff (GPIO_USE_SEL) DEFAULT gpiobase+0x0000: 0x00000004 (GPIO_USE_SEL) DIFF gpiobase+0x0004: 0x06ff6efb (GP_IO_SEL) gpiobase+0x0004: 0xeeff6eff (GP_IO_SEL) DEFAULT gpiobase+0x0004: 0xe8000004 (GP_IO_SEL) DIFF gpiobase+0x000c: 0xe1f17f7e (GP_LVL) gpiobase+0x000c: 0x02fe0100 (GP_LVL) DEFAULT gpiobase+0x000c: 0xe30f7e7e (GP_LVL) DIFF gpiobase+0x002c: 0x00002000 (GPI_INV) gpiobase+0x002c: 0x00000000 (GPI_INV) DEFAULT gpiobase+0x002c: 0x00002000 (GPI_INV) DIFF gpiobase+0x0030: 0x0aff70ff (GPIO_USE_SEL2) gpiobase+0x0030: 0x020300ff (GPIO_USE_SEL2) DEFAULT gpiobase+0x0030: 0x08fc7000 (GPIO_USE_SEL2) DIFF gpiobase+0x0034: 0x15038ff2 (GP_IO_SEL2) gpiobase+0x0034: 0x1f57fff4 (GP_IO_SEL2) DEFAULT gpiobase+0x0034: 0x0a547006 (GP_IO_SEL2) DIFF gpiobase+0x0038: 0xb65e7f4f (GP_LVL2) gpiobase+0x0038: 0xa4aa0007 (GP_LVL2) DEFAULT gpiobase+0x0038: 0x12f47f48 (GP_LVL2) DIFF gpiobase+0x0040: 0x000001f3 (GPIO_USE_SEL3) gpiobase+0x0040: 0x00000130 (GPIO_USE_SEL3) DEFAULT gpiobase+0x0040: 0x000000c3 (GPIO_USE_SEL3) DIFF gpiobase+0x0044: 0x00000ef3 (GPIO_SEL3) gpiobase+0x0044: 0x00000ff0 (GPIO_SEL3) DEFAULT gpiobase+0x0044: 0x00000103 (GPIO_SEL3) DIFF gpiobase+0x0048: 0x00000dfc (GPIO_LVL3) gpiobase+0x0048: 0x000000c0 (GPIO_LVL3) DEFAULT gpiobase+0x0048: 0x00000d3c (GPIO_LVL3) DIFF gpiobase+0x0060: 0x00000000 (GP_RST_SEL1) gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DEFAULT gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DIFF $ ./inteltool -gG CPU: Processor Type: 0, Family 6, Model 3a, Stepping 9 Northbridge: 8086:0150 (unknown) Southbridge: 8086:1e4a (H77) ============= GPIOS ============= GPIOBASE = 0x0500 (IO) gpiobase+0x0000: 0xb96ba1fb (GPIO_USE_SEL) gpiobase+0x0000: 0xb96ba1ff (GPIO_USE_SEL) DEFAULT gpiobase+0x0000: 0x00000004 (GPIO_USE_SEL) DIFF gpiobase+0x0004: 0x06ff6efb (GP_IO_SEL) gpiobase+0x0004: 0xeeff6eff (GP_IO_SEL) DEFAULT gpiobase+0x0004: 0xe8000004 (GP_IO_SEL) DIFF gpiobase+0x0008: 0x00000000 (RESERVED) gpiobase+0x000c: 0xe1f17f7e (GP_LVL) gpiobase+0x000c: 0x02fe0100 (GP_LVL) DEFAULT gpiobase+0x000c: 0xe30f7e7e (GP_LVL) DIFF gpiobase+0x0010: 0x00000000 (RESERVED) gpiobase+0x0014: 0x00000000 (RESERVED) gpiobase+0x0018: 0x00040000 (GPO_BLINK) gpiobase+0x001c: 0x00000000 (GP_SER_BLINK) gpiobase+0x0020: 0x00080000 (GP_SB_CMDSTS) gpiobase+0x0024: 0x00000000 (GP_SB_DATA) gpiobase+0x0028: 0x0000 (GPI_NMI_EN) gpiobase+0x002a: 0x0000 (GPI_NMI_STS) gpiobase+0x002c: 0x00002000 (GPI_INV) gpiobase+0x002c: 0x00000000 (GPI_INV) DEFAULT gpiobase+0x002c: 0x00002000 (GPI_INV) DIFF gpiobase+0x0030: 0x0aff70ff (GPIO_USE_SEL2) gpiobase+0x0030: 0x020300ff (GPIO_USE_SEL2) DEFAULT gpiobase+0x0030: 0x08fc7000 (GPIO_USE_SEL2) DIFF gpiobase+0x0034: 0x15038ff2 (GP_IO_SEL2) gpiobase+0x0034: 0x1f57fff4 (GP_IO_SEL2) DEFAULT gpiobase+0x0034: 0x0a547006 (GP_IO_SEL2) DIFF gpiobase+0x0038: 0xb65e7f4f (GP_LVL2) gpiobase+0x0038: 0xa4aa0007 (GP_LVL2) DEFAULT gpiobase+0x0038: 0x12f47f48 (GP_LVL2) DIFF gpiobase+0x003c: 0x00000000 (RESERVED) gpiobase+0x0040: 0x000001f3 (GPIO_USE_SEL3) gpiobase+0x0040: 0x00000130 (GPIO_USE_SEL3) DEFAULT gpiobase+0x0040: 0x000000c3 (GPIO_USE_SEL3) DIFF gpiobase+0x0044: 0x00000ef3 (GPIO_SEL3) gpiobase+0x0044: 0x00000ff0 (GPIO_SEL3) DEFAULT gpiobase+0x0044: 0x00000103 (GPIO_SEL3) DIFF gpiobase+0x0048: 0x00000dfc (GPIO_LVL3) gpiobase+0x0048: 0x000000c0 (GPIO_LVL3) DEFAULT gpiobase+0x0048: 0x00000d3c (GPIO_LVL3) DIFF gpiobase+0x004c: 0x00000000 (RESERVED) gpiobase+0x0050: 0x00000000 (RESERVED) gpiobase+0x0054: 0x00000000 (RESERVED) gpiobase+0x0058: 0x00000000 (RESERVED) gpiobase+0x005c: 0x00000000 (RESERVED) gpiobase+0x0060: 0x00000000 (GP_RST_SEL1) gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DEFAULT gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DIFF gpiobase+0x0064: 0x00000000 (GP_RST_SEL2) gpiobase+0x0068: 0x00000000 (GP_RST_SEL3) gpiobase+0x006c: 0x00000000 (RESERVED) gpiobase+0x0070: 0x00000000 (RESERVED) gpiobase+0x0074: 0x00000000 (RESERVED) gpiobase+0x0078: 0x00000000 (RESERVED) gpiobase+0x007c: 0x00000000 (RESERVED) Change-Id: If99cf8d5c93e34ad28f52080fff64e01c220eb27 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3001 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01inteltool: Add option to show differences in GPIO setupNico Huber
This adds an option -G, --gpio-diffs to inteltool, which shows GPIO settings that differ from platform defaults. For differing registers, the current, the default, and an xor of the default and the current value is printed. A follow-up commit will add defaults for the Cougar/Panther Point platform controller hubs. If you specify both, -g and -G on the command line, all GPIO registers will be printed interleaved with the diff. Here's a preview: $ ./inteltool -G CPU: Processor Type: 0, Family 6, Model 3a, Stepping 9 Northbridge: 8086:0150 (unknown) Southbridge: 8086:1e4a (H77) ========== GPIO DIFFS =========== GPIOBASE = 0x0500 (IO) gpiobase+0x0000: 0xb96ba1fb (GPIO_USE_SEL) gpiobase+0x0000: 0xb96ba1ff (GPIO_USE_SEL) DEFAULT gpiobase+0x0000: 0x00000004 (GPIO_USE_SEL) DIFF gpiobase+0x0004: 0x06ff6efb (GP_IO_SEL) gpiobase+0x0004: 0xeeff6eff (GP_IO_SEL) DEFAULT gpiobase+0x0004: 0xe8000004 (GP_IO_SEL) DIFF gpiobase+0x000c: 0xe1f17f7e (GP_LVL) gpiobase+0x000c: 0x02fe0100 (GP_LVL) DEFAULT gpiobase+0x000c: 0xe30f7e7e (GP_LVL) DIFF gpiobase+0x002c: 0x00002000 (GPI_INV) gpiobase+0x002c: 0x00000000 (GPI_INV) DEFAULT gpiobase+0x002c: 0x00002000 (GPI_INV) DIFF gpiobase+0x0030: 0x0aff70ff (GPIO_USE_SEL2) gpiobase+0x0030: 0x020300ff (GPIO_USE_SEL2) DEFAULT gpiobase+0x0030: 0x08fc7000 (GPIO_USE_SEL2) DIFF gpiobase+0x0034: 0x15038ff2 (GP_IO_SEL2) gpiobase+0x0034: 0x1f57fff4 (GP_IO_SEL2) DEFAULT gpiobase+0x0034: 0x0a547006 (GP_IO_SEL2) DIFF gpiobase+0x0038: 0xb65e7f4f (GP_LVL2) gpiobase+0x0038: 0xa4aa0007 (GP_LVL2) DEFAULT gpiobase+0x0038: 0x12f47f48 (GP_LVL2) DIFF gpiobase+0x0040: 0x000001f3 (GPIO_USE_SEL3) gpiobase+0x0040: 0x00000130 (GPIO_USE_SEL3) DEFAULT gpiobase+0x0040: 0x000000c3 (GPIO_USE_SEL3) DIFF gpiobase+0x0044: 0x00000ef3 (GPIO_SEL3) gpiobase+0x0044: 0x00000ff0 (GPIO_SEL3) DEFAULT gpiobase+0x0044: 0x00000103 (GPIO_SEL3) DIFF gpiobase+0x0048: 0x00000dfc (GPIO_LVL3) gpiobase+0x0048: 0x000000c0 (GPIO_LVL3) DEFAULT gpiobase+0x0048: 0x00000d3c (GPIO_LVL3) DIFF gpiobase+0x0060: 0x00000000 (GP_RST_SEL1) gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DEFAULT gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DIFF $ ./inteltool -gG CPU: Processor Type: 0, Family 6, Model 3a, Stepping 9 Northbridge: 8086:0150 (unknown) Southbridge: 8086:1e4a (H77) ============= GPIOS ============= GPIOBASE = 0x0500 (IO) gpiobase+0x0000: 0xb96ba1fb (GPIO_USE_SEL) gpiobase+0x0000: 0xb96ba1ff (GPIO_USE_SEL) DEFAULT gpiobase+0x0000: 0x00000004 (GPIO_USE_SEL) DIFF gpiobase+0x0004: 0x06ff6efb (GP_IO_SEL) gpiobase+0x0004: 0xeeff6eff (GP_IO_SEL) DEFAULT gpiobase+0x0004: 0xe8000004 (GP_IO_SEL) DIFF gpiobase+0x0008: 0x00000000 (RESERVED) gpiobase+0x000c: 0xe1f17f7e (GP_LVL) gpiobase+0x000c: 0x02fe0100 (GP_LVL) DEFAULT gpiobase+0x000c: 0xe30f7e7e (GP_LVL) DIFF gpiobase+0x0010: 0x00000000 (RESERVED) gpiobase+0x0014: 0x00000000 (RESERVED) gpiobase+0x0018: 0x00040000 (GPO_BLINK) gpiobase+0x001c: 0x00000000 (GP_SER_BLINK) gpiobase+0x0020: 0x00080000 (GP_SB_CMDSTS) gpiobase+0x0024: 0x00000000 (GP_SB_DATA) gpiobase+0x0028: 0x0000 (GPI_NMI_EN) gpiobase+0x002a: 0x0000 (GPI_NMI_STS) gpiobase+0x002c: 0x00002000 (GPI_INV) gpiobase+0x002c: 0x00000000 (GPI_INV) DEFAULT gpiobase+0x002c: 0x00002000 (GPI_INV) DIFF gpiobase+0x0030: 0x0aff70ff (GPIO_USE_SEL2) gpiobase+0x0030: 0x020300ff (GPIO_USE_SEL2) DEFAULT gpiobase+0x0030: 0x08fc7000 (GPIO_USE_SEL2) DIFF gpiobase+0x0034: 0x15038ff2 (GP_IO_SEL2) gpiobase+0x0034: 0x1f57fff4 (GP_IO_SEL2) DEFAULT gpiobase+0x0034: 0x0a547006 (GP_IO_SEL2) DIFF gpiobase+0x0038: 0xb65e7f4f (GP_LVL2) gpiobase+0x0038: 0xa4aa0007 (GP_LVL2) DEFAULT gpiobase+0x0038: 0x12f47f48 (GP_LVL2) DIFF gpiobase+0x003c: 0x00000000 (RESERVED) gpiobase+0x0040: 0x000001f3 (GPIO_USE_SEL3) gpiobase+0x0040: 0x00000130 (GPIO_USE_SEL3) DEFAULT gpiobase+0x0040: 0x000000c3 (GPIO_USE_SEL3) DIFF gpiobase+0x0044: 0x00000ef3 (GPIO_SEL3) gpiobase+0x0044: 0x00000ff0 (GPIO_SEL3) DEFAULT gpiobase+0x0044: 0x00000103 (GPIO_SEL3) DIFF gpiobase+0x0048: 0x00000dfc (GPIO_LVL3) gpiobase+0x0048: 0x000000c0 (GPIO_LVL3) DEFAULT gpiobase+0x0048: 0x00000d3c (GPIO_LVL3) DIFF gpiobase+0x004c: 0x00000000 (RESERVED) gpiobase+0x0050: 0x00000000 (RESERVED) gpiobase+0x0054: 0x00000000 (RESERVED) gpiobase+0x0058: 0x00000000 (RESERVED) gpiobase+0x005c: 0x00000000 (RESERVED) gpiobase+0x0060: 0x00000000 (GP_RST_SEL1) gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DEFAULT gpiobase+0x0060: 0x01000000 (GP_RST_SEL1) DIFF gpiobase+0x0064: 0x00000000 (GP_RST_SEL2) gpiobase+0x0068: 0x00000000 (GP_RST_SEL3) gpiobase+0x006c: 0x00000000 (RESERVED) gpiobase+0x0070: 0x00000000 (RESERVED) gpiobase+0x0074: 0x00000000 (RESERVED) gpiobase+0x0078: 0x00000000 (RESERVED) gpiobase+0x007c: 0x00000000 (RESERVED) Change-Id: Ic77474c4bc0871e95103ddecd9f6a9406c8f016d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3000 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01inteltool: Support PM registers on Cougar/Panther PointNico Huber
This adds the power management register definitions for Intel's Cougar Point and Panther Point platform controller hubs (PCH). The definitions are actually a subset of the older ICH10R registers: I've added just those that are mentioned in the public specifications in [1] and [2]. I've tested dumping with an H77 PCH. NM70 is missing in [1]. Therefore, I didn't add it here. [1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet Document-Number: 324645-006 [2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) - Datasheet Document-Number: 326776-003 Change-Id: Ia6945fe96cd96b568ed5191e91dbba5556e1ee95 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/2985 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-30inteltool: Add Cougar/Panther Point IDs to rootcmplx.cNico Huber
This adds the PCI IDs of Intel's Cougar Point and Panther Point platform controller hubs (PCH) to the dumping of the root complex configuration under the root complex base address (RCBA). Those PCHs are handled exactly as the older ICHs which can be seen in [1] and [2]. I've tested dumping with an H77 PCH. NM70 is missing in [1]. Therefore, I didn't add it here. [1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet Document-Number: 324645-006 [2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) - Datasheet Document-Number: 326776-003 Change-Id: I2296caae57e614171300362d41715deecec77762 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/2986 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-29inteltool: Support GPIO registers on Cougar/Panther PointNico Huber
This adds the GPIO register definitions for Intel's Cougar Point and Panther Point platform controller hubs (PCH). All information is taken from the public specifications in [1] and [2]. I've tested it with an H77 PCH. NM70 is missing in [1]. Therefore, I didn't add it here. [1] Intel 6 Series Chipset and Intel C200 Series Chipset - Datasheet Document-Number: 324645-006 [2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) - Datasheet Document-Number: 326776-003 Change-Id: I31711e24f852e68b3c113e3bd9243dc7e89ac197 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/2961 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29inteltool: Add definitions for Cougar/Panther Point PCI IDsNico Huber
This adds correspondings #defines for the PCI IDs of the LPC device on Intel's Cougar Point and Panther Point platform controller hubs. Those will be used more in later commits. I've checked all those IDs against the specification updates [1] and [2]. [1] Intel 6 Series Chipset and Intel C200 Series Chipset Specification Update Document-Number: 324646-019 [2] Intel 7 Series / C216 Chipset Family Platform Controller Hub (PCH) Family - Datasheet Specification Update Document-Number: 326777-010 Change-Id: Ibef5a30d283c568c345eb8d8149723e7a3049272 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/2960 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-25inteltool: Add support for Atom N455 (0x106c0) in CPU MSRs dumpOlivier Langlois
reference for Atom MSRs are from Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3C: System Programming Guide, Part 3 Order Number 326019, January 2013, Table 35-4, 35-5 Has been successfully tested on the targeted cpu. Change-Id: If94279caeab27121c63ec43c258dc962c167ad51 Signed-off-by: Olivier Langlois <olivier@olivierlanglois.net> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2192 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-27inteltool: Add output of 64bit registers in PMBASENico Huber
Output values of 64bit registers and fix settings for GPE0_EN for ICH9/10. Change-Id: I8ca6b32500331707670972b38466345f581844cd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1625 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-19inteltool: improve the libpci test in the MakefileStefan Tauner
Use the verbatim variable method to define and export test code and the actual libpci test from flashrom. This improves readability and will work with stricter compiler (settings). Change-Id: Iace7d53b0b992c4fde596ce1d606ad715d6dfc2a Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1575 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-19inteltool: add support for 946GZ and 946PLStefan Tauner
Change-Id: Ied0ff16c16d8c2f04b55fe6b0a6ee38966d3c424 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1576 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-19inteltool: new definitions and cleanupStefan Tauner
- Separate host bridges/DRAM controllers from LPC controllers in supported_chips_list[]. - Refine some names and macros. - Clean up some whitespace errors. - Add IDs and names of 5, 6 and 7 Series southbridges and the three latest Core CPU families with integrated memory controllers but do not implement any pretty printing routines for them yet. The first generation Core family is already supported, although it was wrongly named after the PCH and used the wrong ID. Also, the BAR values have been mangled to 32b instead of 64b. Both errors have been fixed and most basic support for the other two generations was added. Change-Id: Ief81e57f7c065cafac52e48b6364b57c72fcdf95 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1574 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-14inteltool: remove bashism from MakefileStefan Tauner
&> is a bashism to redirect both outward streams (stdout and stderr), but with other shells this introduces a race condition with the rm command after it, because the compiler execution is done in the background/ in parallel. Found and tested with dash. Change-Id: I08516494828c9f7af168f954f2df027372657867 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1573 Tested-by: build bot (Jenkins) Reviewed-by: Bernhard Urban <lewurm@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-21inteltool: Add support for H65 Express chipsetAnton Kochkov
Added few MCH and DMI registers for H65E. Description of them can be found at "2nd Generation Intel Core Processors Family datasheet" Change-Id: If4fee35bb5a09b04ea0684be9cbd3c1e9084b934 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1258 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-06inteltool: fixup intel 5000 chipset pci idsSven Schnelle
Change-Id: I2cd1dac0dd9a5da1000a3ffa3e1c8ee4c5c8ba43 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1175 Tested-by: build bot (Jenkins)
2012-03-30Fix warnings in coreboot utilities.Stefan Reinauer
- Fix some poor programming practice (breaks of strict aliasing as well as not checking the return value of read) - Use PRIx64 instead of %llx to prevent compilation warnings with both 32bit and 64bit compilers - Use same compiler command options when linking inteltool and when detecting libpci for inteltool Change-Id: I08b2e8d1bbc908f6b1f26d25cb3a4b03d818e124 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/752 Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-01-08inteltool: Add support for dumping AMB registersSven Schnelle
Change-Id: I98615725afdb315caa67b2226224e3eb2a0e4393 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/525 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-30inteltool: Add Intel i63xx I/O Controller HubSven Schnelle
Change-Id: Iaea7e4d1b206d43661ecb61d2ae517723fb8d008 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/356 Tested-by: build bot (Jenkins)
2011-09-14inteltool: fixed 64 bit buildMathias Krause
The inline assembly for cpuid() was 32 bit specific. Additionally a format string referencing a size_t argument wasn't using the %z length modifier. Change-Id: Iac4a4d5ca81f9bf67bb7b8772013bf6c289e4301 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/211 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14inteltool: Fixed building of position independent executablesMathias Krause
When building a position independent executable (PIE) EBX is used internally by the compiler to generate position independent address references so it cannot be used in the clobber list. Use the already existing code for the Darwin plattform for that case, too -- it'll preserve the EBX value. Change-Id: Ief6d4872b8cd990856a0e8227a88bb228782aced Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/209 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-12inteltool: added more device IDsRuud Schramp
Change-Id: I6f2272ae4071025e671638e83bade6a96aac658b Signed-off-by: Ruud Schramp <schramp@holmes.nl> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/185 Tested-by: build bot (Jenkins)
2011-03-18oops, one URL fix was missing. Add new DirectHW URLStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6455 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-18DirectHW fixes for coreboot utilitiesStefan Reinauer
See http://www.coreboot.org/DirectHW for more information Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6454 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-17inteltool: Model 0xf2x, ICH5, i865 support.Idwer Vollering
Add support for dumping the MSRs on model_f2x and dumping GPIOs and PM registers on ICH5. Add ICH5 and i865 to the supported chips list. Enable the dumping of BAR6 on i865. Sample output: Disabling memory access: $ sudo setpci -s 6.0 0x04.b=0x0 $ sudo ./inteltool -m | head -n 9 Intel CPU: Processor Type: 0, Family f, Model 2, Stepping 7 Intel Northbridge: 8086:2570 (i865) Intel Southbridge: 8086:24d0 (ICH5) ============= MCHBAR ============ Access to BAR6 is currently disabled, attempting to enable. Enabled successfully. BAR6 = 0xfecf0000 (MEM) Signed-off-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Joseph Smith <joe@settoplinux.org> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6197 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-27- Add support for Intel Pentium III MSRsTobias Diedrich
- pmbase is on southbridge function 3 on I82371XX Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6128 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-24Add inteltool support for FreeBSD.Idwer Vollering
Signed-off-by: Idwer Vollering <vidwer@gmail.com> Acked-by Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5981 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-03Add support for dumping ACPI registers for i7Warren Turkal
Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5773 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-03Add support for dumping RCBA registers for i7Warren Turkal
Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5772 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-03Remove some errant spacesWarren Turkal
Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5771 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-03Add DMIBAR support for Intel X58 southbridgeWarren Turkal
Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5770 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-01Add support for dumping GPIOS on Intel ICH10R. This information comes from ↵Warren Turkal
the Intel ICH10 Family Datasheet. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5761 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-17Add support for the Intel NM10 (a variant of ICH7) and ICH8 southbridges.Corey Osgood
Both are tested and appear to be working, however I'm not 100% clear on if the NM10 has any other PCI IDs. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5709 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-01add i945GSE to inteltoolBjörn Busse
Signed-off-by: Björn Busse <bj.rn@co-assembler.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5675 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-29Add support for the Intel Atom D400/500- and N400-series integrated Corey Osgood
northbridge. Also add support for the very similar Q963/965 northbridge. Tested: D510: confirmed working, with MCHBAR enable code Q965: writes to bit 0 to enable MCHBAR access are ignored, all other functions work Untested: D410/D525/N400: should be the same northbridge Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-16This patch adds inteltool support for i810E and ICH2.Joseph Smith
Signed-off-by: Joseph Smith <joe@settoplinux.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5632 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-01inteltool: basic poulsbo sch support.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5601 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-30whitespace cleanup inteltool cpu.cStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5598 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-30Added support to ICH9 chipset familyAnton Kochkov
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5597 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-21This patch adds:Pat Erley
ICH6 Southbridge, 82915 Series Northbridge, P4 6xx Series CPU to inteltool Tested on my Clevo D900T, based on ICH6 and i915P, with a p4 630 installed. Signed-off-by: Pat Erley <pat-lkml@erley.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5469 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-21drop dead code.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5265 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-22Inteltool: Add i830/Tolapai/Ich4 supportStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5142 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-02Add 82Q35/P35/Q33/G33/G31/P31 support to inteltool.Loïc Grenié
The registers are (as far as I can tell) unchanged with respect to those of the PM965. Signed-off-by: Loïc Grenié <loic.grenie@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4905 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-30Hm, quickfix to prevent the following crash, no idea yet what happens:Uwe Hermann
*** glibc detected *** ././inteltool: double free or corruption (top): 0x08db0260 *** Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4695 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-30Add initial inteltool support for Intel 440BX/440LX and 82371AB/EB/MB.Maciej Pijanka
Signed-off-by: Maciej Pijanka <maciej.pijanka@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4694 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-01Clean up Mac OS X support of inteltoolStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> Some minor modifications to allow 64bit/32bit compilation on Darwin git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4621 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-29add i810 and ich0Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4620 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30add new supported chipsetWarren Turkal
Add identification for X58 and ICH10R. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-22mini fix to reliably compile inteltool on darwin, and on Linux both on ↵Stefan Reinauer
x86/x86_64. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4190 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 20:39:17 +0000