summaryrefslogtreecommitdiff
path: root/util/inteltool
AgeCommit message (Collapse)Author
2019-07-07util/inteltool: Make internal functions staticJacob Garber
None of these functions are used outside of the files they are defined in, so they can all be static. Change-Id: Ie00fef5a5ba2779e0ff45640cff5cc9f1d096dc1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-05-15util/inteltool: Add Kabylake E3-1200 SupportChristian Walter
Change-Id: I5c55102d7ce15dbb708e9433500ebd1ed53179ad Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-13util/inteltool: Use appropriate channel for printing timingsJacob Garber
At least one channel must be present, so print an error if there is not. However, we cannot always assume it will be the first channel, so make the appropriate selection when printing the timings. Found-by: Coverity Scan #1370{584,585,588,589,590-596,600} Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I6b59989242e498474782876302e0850e3e4cf2d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-06inteltool: Add Sunrise Point-LP Skylake PCH IDsFelix Singer
Sunrise Point-LP is used on Skylake and KabyLake platforms, but the PCH IDs differ. This commit adds the PCH IDs for Skylake mobile platforms and renames the Kabylake macros to distinguish them. Used Intel documents: - 332995-001EN (I/O datasheet vol. 1) - 332996-002EN (I/O datasheet vol. 2) Change-Id: Id46224fcc44b06c91cbcd6c74a55c95e1de65ec6 Signed-off-by: Felix Singer <migy@darmstadt.ccc.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-11util/inteltool: Swap conditions to prevent uninit readsJacob Garber
Both values in each array are only initialized if `two_channels` is true, so we need to check that first. Found-by: Coverity Scan #1370{584,585,588,589,590-596,600} Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I592bc6ae00f834f74a61668d7a3919014ec635f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-15inteltool: add 300 and C240 Series PCHThomas Heijligen
Values from - Intel doc 337347 rev4 - coreboot soc/intel/cannonlake/include/soc/gpio_soc_defs_cnp_h.h On Coffeelake H (using Cannonlake / Cannonpoint PCH) p2sb is not accessible. Using a static value instead. 0xfd000000 is a common value chosen by coreboot and non-coreboot firmware. Change-Id: Id637f703ab0a99eb0908ecdc3da27ba80db1c6b8 Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-06inteltool: Add multiple device IDs of Intel GPUsFelix Singer
* Intel HD Graphics 510 * Intel HD Graphics 515 * Intel HD Graphics 520 * Intel HD Graphics 530 (2x) * Intel UHD Graphics 615 (2x) * Intel UHD Graphics 617 * Intel UHD Graphics 620 (3x) * Intel UHD Graphics 630 (7x) * Intel UHD Graphics 640 * Intel Iris Graphics 540 * Intel Iris Graphics 550 * Intel Iris Pro Graphics 580 * Intel Iris Plus Graphics 650 * Intel Iris Plus Graphics 655 Change-Id: I299a5fc082433b0aab4861a24aecbe83b61a404a Signed-off-by: Felix Singer <migy@darmstadt.ccc.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30610 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Thomas Heijligen <src@posteo.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-05util/inteltool: Add Apollo Lake GPIO groups and namesNico Huber
Apollo Lake has four GPIO communities each with a single group named after the physical location of the pads (I guess): North West, North, West and South West. Also add some logic to be able to tag the default function of a pad (with an asterisk before its name). This seems easier to review in the tables, but we could also encode the number of the default explicitly instead. Used Intel documents: - 334817-001 (datasheet vol. 1) - 334819-001 (datasheet vol. 3) Change-Id: I5cd687fdc1d2ae81f2e948178bf319897b47f031 Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Felix Singer <migy@darmstadt.ccc.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-21util/inteltool: Add support for DenvertonThomas Heijligen
Used documents: - C3000 Product Family Datasheet Change-Id: I54d09c78e1cce84b63300dfc0aa1bb374bb7faae Co-authored-by: Felix Singer <migy@darmstadt.ccc.de> Signed-off-by: Felix Singer <migy@darmstadt.ccc.de> Reviewed-on: https://review.coreboot.org/c/30887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-05util/inteltool: fix PCR init of Sunrise Point-LP devicesShaleen Jain
Fixes getting a dump of GPIO registers for these devices. Change-Id: I80f05a170152969ba45d6aee33ab7ed5296ee496 Signed-off-by: Shaleen Jain <shaleen@jain.sh> Reviewed-on: https://review.coreboot.org/c/30604 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-28util/inteltool: Add support for Sunrise Point LPMatthew Garrett
Used documents: 334658 (Sunrise Point-LP I/O datasheet vol. 1) 334659 (Sunrise Point-LP I/O datasheet vol. 2) 332690 (Sunrise Point I/O datasheet vol. 1) Change-Id: I16237ffc9a225b46271f2a51d77a7f28dfc36138 Signed-off-by: Felix Singer <migy@darmstadt.ccc.de> Reviewed-on: https://review.coreboot.org/c/28623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-29util/inteltool: Add Apollo Lake LPC ID and allow to read PCRsNico Huber
The P2SB (PCI to Side-Band) bridge is on a different PCI device on APL. Hence, we have to decide based on the LPC ID which device to query. Also fix a comment. Change-Id: Ie20d7d2d246629d085bcf4740ba28b1e81e6a12a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29896 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-17treewide: use /usr/bin/env where appropriateYegor Timoshenko
Some Unix systems (GuixSD, NixOS) do not install programs like Bash and Python to /usr/bin, and /usr/bin/env has to be used to locate these instead. Change-Id: I7546bcb881c532adc984577ecb0ee2ec4f2efe00 Signed-off-by: Yegor Timoshenko <yegortimoshenko@riseup.net> Reviewed-on: https://review.coreboot.org/28953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-18util/inteltool: Fix LynxPoint (non-LP) GPIO register mapFehér Roland Ádám
The GPIO register dumper code for the LynxPoint family PCH chips (Intel 8 Series and C220 Series) was incorrectly using a shortened version of the LynxPoint-LP GPIO register map. Switched to the correct register map for the affected chipsets. Change-Id: I394a198bbb6628915cb73cabc5c8ff808579a07f Signed-off-by: Fehér Roland Ádám <feherneoh@gmail.com> Reviewed-on: https://review.coreboot.org/29167 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26util: Add description.md to each utilTom Hiller
Descriptions are taken from the files themselves or READMEs. Description followed by a space with the language in marked up as code. Change-Id: I5f91e85d1034736289aedf27de00df00db3ff19c Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/27563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-21inteltool: Add PCI IDs for the C220 PCH seriesqeed
Adds missing PCI IDs to allow tool to dump the C220 PCH (8 series) southbridge. Intel Document 328904 is the datasheet for this PCH. Change-Id: I07a8f2e9cb0ee8677c8fe2c51881147ed81c1a35 Signed-off-by: Quan Tran <qeed.quan@gmail.com> Reviewed-on: https://review.coreboot.org/27168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-11inteltool: Add dumping of full PCR portsYouness Alaoui
SoCs from Skylake on have many settings as so called private con- figuration registers (PCRs). These are organized as 256 ports with a 64KiB space each. We use the Primary to Sideband (P2SB) bridge's BAR to access them. Change-Id: Iede4ac601355e2be377bc986d62d20098980ec35 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19593 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-04util/inteltool: Add Pentium 4 model f6xElyes HAOUAS
Tested on Pentium 4, CPUID = 0F65 board: NEC 945G-M4. Change-Id: I27c4bb0aed3259aa332581384077e000c9fb4b4c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-03-27inteltool: Add some Skylake desktop idsNico Huber
Change-Id: I1738a2544eb2435cb4b8718bcce5170d1ef04f72 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/25144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-03-15util/inteltool: Add missing #include <string.h>Nico Huber
Change-Id: I7bb142d9f936b73e84d301028069d85cc15d596a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/25143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-02-06inteltool: Add Cougar- and Pantherpoint PCH PCI IDs for SPIArthur Heymans
Tested to display the register content correctly on a Lenovo Thinkpad X220. Change-Id: I8b65302ed52d4ef1a31bf0cdd9208b368eb7ad67 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-02-06inteltool: Fix displaying 64bit spi registersArthur Heymans
The registers were taken from the wrong addess since the spibar offset was not added to it. This also fixes the endianness. Change-Id: I8bb91517770359599fe5f579c4686434da8d1c27 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23478 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-15inteltool: Dump Sunrise Point PCH-H GPIO groupsNico Huber
Change-Id: Ib6b083c31617e19cbbb0929e2fc8ab39d54533bf Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-15inteltool: Support for nasty Primary to Sideband Bridge (P2SB)Nico Huber
The Primary to Sideband Bridge (P2SB) is the interface to Private Con- figuration Registers (PCR) including GPIO configuration. Of course, access is restricted to Intel partners and criminals, so the PCI device is hidden from the OS. Probably we only need to fetch the SBREG_BAR address and can hide the PCI device again after that. Change-Id: Ic121a09f021708aab82ae4b9d76d6c3c6fb884fa Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-10util/inteltool: Add Skylake Desktop NorthbridgeChristoph Pomaska
Add the 8086:191f North/Host Bridge to the list of definitions. Adding the definiton makes the Northbridge get recognized by inteltool. It is found in the Intel i5-6600K CPU: https://ark.intel.com/products/88191/Intel-Core-i5-6600K-Processor-6M-Cache-up-to-3_90-GHz Change-Id: Id746d1e8b3bb90b3b68a2f6c372890671dd61b5f Signed-off-by: Christoph Pomaska <cp_public@gmx.de> Reviewed-on: https://review.coreboot.org/23055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-12-22inteltool: Add hint for compiler to avoid fall-through warningPaul Menzel
Falling through is intended here, so add a comment that GCC will notice and stop warning about this. Change-Id: I12637b6bc18844a3bc47f06208df7fee7a4feb3b Found-by: gcc-7 (Debian 7-20170316-1) 7.0.1 20170316 (experimental) [trunk revision 246203] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Omar Pakker Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-12-20util/inteltool: Add GPU device IDsPatrick Rudolph
Add PCI device IDs for several Intel GPUs. Change-Id: I7d6ba16b2b115187fd57a31716f23a610b520d3e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-08util/inteltool: Add Skylake definition to MCHBAR readingMaximilian Schander
Taken from * 6th Generation Intel Processor Families for S-Platform Volume 2 of 2 * Page 56 * 332688-003EN Change-Id: I46c8dd77823870b55cc040f7f6c557cb5a2562a1 Signed-off-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/22351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-08util/inteltool: Add PCIEXBAR and PXPEPBAR reading for SkylakeMaximilian Schander
Both registers behave the same as on the previous generation Taken from * 6th Generation Intel Processor Families for S-Platform Volume 2 of 2 * Page 55 and 62 * 332688-003EN Change-Id: Id02a38a7ab51003c9d0f16ebb2300a16b66a15f9 Signed-off-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/22350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-08util/inteltool: Add Skylake DMIBAR register dumpingMaximilian Schander
Register definitions were taken from * 6th Generation Intel Processor Families for S-Platform Volume 2 of 2 * Page 117 * 332688-003EN As well as * 6th Generation Intel Processor Families for H-Platform Volume 2 of 2 * Page 117 * 332987-002EN Tested on a 6th gen skylake mobile cpu and capability registers do match up with the default values. Change-Id: I636f6c3d045e297f1439d3e88e43f41e03db4c8e Signed-off-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/22345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-11-03inteltool: Add southbridge and CPU definitions for SkylakeMaximilian Schander
Change-Id: Id9501f11a79cb314bc407760b22006a3375e669d Signed-off-by: Maximilian Schander <maxschander@googlemail.com> Reviewed-on: https://review.coreboot.org/22211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-22util/inteltool: Remove duplicated error message, switch to snprintfMaciej Suminski
Passing a string containing output from strerror() to perror() causes double error message display. It is also causing segfaults when the error message is longer than temp_string capacity. To fix the problems, sterror() call has been removed so the error message is printed only once. This could be enough to avoid segfaults, but it is a good practice to limit output size with snprintf(). Change-Id: I5ccc37e404f278cafae0a451c5acaa27d7907cce Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch> Reviewed-on: https://review.coreboot.org/21025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-20util/inteltool: Fix a comparison between signed and unsigned integersMaciej Suminski
Change-Id: Ic6489c408a87213d3c39626c5379a44acea2c34d Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch> Reviewed-on: https://review.coreboot.org/21024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-07-28util/inteltool: Clean up checkpatch.pl warningsPratik Prajapati
Remove braces around single statements. "WARNING: braces {} are not necessary for single statement blocks" Change-Id: Id5a7dc3a9672266b66d7f46db2ff087b98fd174d Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/20771 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-28util/inteltool: Add support for SGX statusPratik Prajapati
Add support for dumping Intel Software Guard Extension (SGX) status. --sgx or -x is the command line switch to get SGX status. The code iterates through all cores and reads MSRs to check if SGX is supported, enabled and the feature is locked. Change-Id: I1f5046c1f6703f5429c8717053ffe9c981cedf6f Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/20758 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-15inteltool: Add support for Skylake PMCNico Huber
Change-Id: Ia80f5269476ee1c70dcb157ba3ed5a861611ec7c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-14inteltool/Makefile: Clean .dependencies tooNico Huber
Change-Id: Ib4fc326c6612f2d142c8a5220949fbb4b97c37a1 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-14inteltool/Makefile: Separate CPPFLAGS from CFLAGSNico Huber
Separate the required CPPFLAGS from environment overridable CFLAGS. Change-Id: I0c1c0a1cebc7f7971634bf57d4a2370939c43fda Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-09inteltool: Add Skylake PCI id in memory.cNico Huber
Change-Id: I751e887bd90a258a69d13ea4ee9a409c8c86a3c3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-07Use more secure HTTPS URLs for coreboot sitesPaul Menzel
The coreboot sites support HTTPS, and requests over HTTP with SSL are also redirected. So use the more secure URLs, which also saves a request most of the times, as nothing needs to be redirected. Run the command below to replace all occurences. ``` $ git grep -l -E 'http://(www.|review.|)coreboot.org' | xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g' ``` Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-06inteltool: #include <commonlib/helpers.h>Nico Huber
Change-Id: I66a243486a347313103ffd2cb2ca0447228e4054 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-06inteltool/ahci: Don't print reserved, all-zero registersNico Huber
Behavior matches with other dumps of inteltool. Change-Id: Id9755d251fc42185c9e8d574deb55c76e129b718 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-06inteltool/ahci: Add Skylake supportNico Huber
The SATA device moved from 0:1f.2 to 0:17.0, 0:1f.2 became PMC. We detect that by checking the PCI device class. The ABAR MMIO space has grown to 2KiB and up to 8 ports are supported now. For backwards compatibility, only dump port registers of ports that are enabled in the Ports Implemented (PI) register. Change-Id: I8e0f07d7359d92f689882b5afefa5ffb3766ee8b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-06inteltool: Fix clean-up and close related TODONico Huber
We have to call pci_free_dev() for each device we allocated with pci_get_dev(). Since that's not the case for `sb`, we can close this TODO. Change-Id: I1ef80c837263a205467f835156dcb8fa667d3a8f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-06inteltool: Add first Skylake PCI IDsNico Huber
Change-Id: Ia5ef6b04f01e381174a4d8f73ddafeb18d488803 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-06inteltool: Don't use PCI_FILL_SIZESNico Huber
This is supposed to fill the `size[]` array with the actual sizes of a device' MMIO ranges, but apparently isn't implemented for every access method in libpci (we let the library choose one). It tells us by clearing `PCI_FILL_SIZES` in the return value of `pci_fill_info()` (which we don't check). Since we don't ever use `size`, we can just make it clear and don't ask for it. Change-Id: I3fb9334472f1c7563a9e17910190f73affbe067a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-05-01util/inteltool: Add support for Wildcat Point-LP PremiumYouness Alaoui
The Wildcat Point-LP Premium is handled the same as the Wildcat Point-LP, but it wasn't supported by inteltool. Change-Id: I694514e1963f074582a3f5f81d63c20e7fa49189 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19445 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-01util/inteltool: Break long lines in supported_chips_listYouness Alaoui
Lint prevents my next commit which adds a new line to the table so it's better to break all the > 80 character lines so it will be consistent with the new line I'm about to add. Change-Id: Ic7ad0cb90e861cd830db1186225d4f839250792a Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19444 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-15util/inteltool: Add ICH10 (Consumer Base) supportArthur Heymans
Reuses ICH10R functions. TESTED on Intel DG43GT (Not supported by coreboot) Change-Id: If9ae8ba8b95e3a7bf6596ae639eb8cafab583298 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19232 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-03util/inteltool: Add ICH6-10 to BIOS_CNTL listArthur Heymans
Without this change inteltool cannot read BIOS_CNTL values nor can it read the SPIBAR values. Change-Id: I9ff16e060aca66e3cb11c8315a6843ccecd1d3c2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17979 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03util/inteltool: Fix ICH SPIBAR registersArthur Heymans
The ICH7 SPIBAR offset and registers are different from later generation. ICH8 has a different offset from later generation. ICH6 has no SPI controller. Change-Id: I7691bce619089b15805114047bcb1fd121a5722b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17978 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-21util/inteltool: Fix bay trail ahci deviceMarshall Dawson
Use a unique bus/device/function if a bay trail LPC bridge was found. TEST=Run on MinnowBoard MAX Turbot and customer's LynxPoint-LP. Change-Id: Ib4b50aaf9817ac94f46c28925081540676226d84 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17464 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-20util/inteltool: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: Id42a2901cf76e6b867f62a752a38bbd6f6e5f54e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17059 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-20util/inteltool: Use tabs for indentsElyes HAOUAS
Change-Id: I9d27c276053c51021166f4b22d150060e415d08f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17025 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-09-21inteltool: add --ahci for printing AHCI registersIru Cai
According to datasheets for Intel ICH/PCH, it works for chipsets from ICH7 to 9-series PCH, with PCI device address D31:F2. Change-Id: If1ddd7208108bda949b5a94894a7bf9e8bfe1e5f Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/15106 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31util/inteltool: fix memory leakPatrick Georgi
A struct pci_dev was allocated but not freed. Change-Id: I6a8bbef6a118fc1f0aa7037e72c4d0dda9208f4b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1353037 Reviewed-on: https://review.coreboot.org/15971 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28util: Correct typo in MSR_EBC_SOFT_POWERONElyes HAOUAS
Change-Id: Iba5fc92d8740d0bb7d41f8a83513ba7fb97be592 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15900 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-08inteltool: handle unsafe dumping of graphics registersStefan Tauner
The current implementation from Vladimir simply dumps 1 MB of memory contents starting at the base address of the second PCI device (which most likely is the VGA controller on Intel systems). This locks up a number of different systems, e.g. my Ibex Peak-based T410s. This patch documents the issue and stops dumping the graphics registers for the -a/--all parameter. Change-Id: I581bdc63db60afaf4792bc11fbeed73aab57f63a Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/14627 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-05-13inteltool: update documentationStefan Tauner
- manpage - usage message - new warning message if -S is used on an unsupported chipset Change-Id: I1acaa5f4232b65244ec00fd22ec7460d9cc387f1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/14624 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-01-13utils: Remove old license text from help & disclaimer fileMartin Roth
The license text that we decided to remove was removed from the headers of these files, but was still left in the help text. Remove it from those locations as well. Change-Id: I0e1b3b79f1afa35e632c4a4dd09a8bf2b02eaa6d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12913 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07inteltool: add NetBSD compatibilityAndrey Korolyov
Tested on NetBSD-7.0/i386 Change-Id: I6a693633d3a80ea07ade233b1b4fd1c5a1412032 Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Reviewed-on: https://review.coreboot.org/12835 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-24util: Update makefiles for junit testingMartin Roth
- Have clean remove junit.xml files. - Remove junit.xml target from cbmem makefile - this is in the top level Makefile.inc now. - add distclean targets to makefiles. - Make sure all makefiles have .PHONY set up. - rm commands need -f or they will fail if the file they're trying to remove doesn't exist, causing the build to fail. Change-Id: I2f0635f2c0a9417e3377a90c8d67103323c4a72f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12120 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-11inteltool: Add function to generate SPD dump.Vladimir Serbinenko
E.g. on my MacbookAir to generate spd.bin to be used with coreboot I do: ./inteltool -S spd.bin Change-Id: If165475ed3e1f3262a8926ef619128d25b1e2896 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/11847 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-08-30inteltool: Add Intel 4-Series chipset detectionDamien Zammit
Previously, X4X was incorrectly named because it provides support for SKUs within XX4X range. This is renamed. This patch provides support for all X4X SKUs according to datasheet Intel 4 Series Chipset Family Specification Update, namely: Q45, Q43, P45, P43, G45, G43, G41 and B43 (both versions). Tested on Gigabyte GA-G41M-ES2L Change-Id: I032265e80d9ca51e2fef29201280832ea3210a0b Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/11245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-08-26inteltool: fix build for FreeBSDRoger Pau Monne
Replace usage of u<bitness> types with proper uint<bitness>_t types. Change-Id: I8359d70304a138b29bfc1358af77af26b2bc8682 Signed-off-by: Roger Pau Monne <roger.pau@citrix.com> Reviewed-on: http://review.coreboot.org/11364 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-28Remove address from GPLv2 headersPatrick Georgi
Follow up for commit b890a12, some contributions brought back a number of FSF addresses, so get rid of them again. Change-Id: I0ac0c957738ce512deb0ed82b2219ef90d96d46b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10322 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-25inteltool: dump gfx registers.Vladimir Serbinenko
Useful for autoport and other gfx-related developpement. Change-Id: I1fc0952bc30ab15cd39a4f0c00649714dcf318f3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10276 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-16util/inteltool: add Broadwell-U supportMatt DeVillier
add handling of PCI IDs for Broadwell-U/Wildcat Point LP, using same functions as Haswell-U/Lynx Point LP Change-Id: I1094cbdace3c73f0f85c2e27c676b877b1a04bfe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: http://review.coreboot.org/10209 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-03-26inteltool: add ICH8M-E supportLubomir Rintel
Tested on a Lenovo X61. Change-Id: I047f5a029d9be9fe6a000e2b45be44c7f14b33d7 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: http://review.coreboot.org/8568 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-10util/inteltool: Support reading RCBA of NM70 southbridgeAlexandru Gagniuc
Change-Id: Ia90f967a4988214c719f374a49233bb6fade11b0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8481 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-01-08inteltool: add `-s` to dump spi bar and bios_cntl registersAlexander Couzens
Change-Id: I3bb5dc23885af8c992456ee5e4bd374cd4b813bf Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8049 Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-16inteltool: Start adding Bay TrailMartin Roth
- Add silvermont (Bay Trail core) MSRs - these are shared with rangeley/avoton. - Add GPIO values and GPIO muxing information. - Add Bay Trail to the PM list. Still to do: - Northbridge functionality (RCBA, Memory timings, etc.) - Add Graphics registers Change-Id: I9fe0c0f1efe5f4344aeb3bad3f13037555109060 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7711 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-09utils: Remove references to tracker from manpagesMartin Roth
abuild, inteltool, and superiotool's manpages still referenced reporting bugs to tracker.coreboot.org. Remove that url and change the message to point to the coreboot mailing list instead. Change-Id: I7a85bc2b36ccdb7f3798a39a08345c1a02a67e65 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7712 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-09inteltool: add more hardware IDs and PCIEXBAR/PXPEPBAR read supportFelix Held
Add IDs of some SNB and Haswell chips; use more descriptive names. Add PCIEXBAR and PXPEPBAR read support for SNB/IVB/Haswell. Change-Id: I16753bf90061fc2065b813b1c2169e7b7bcc89e8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/7360 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2014-11-06inteltool: Fix message in case of multiple LPC controllersMathias Krause
If we find multiple LPC controllers, we want to tell the user that we'll ignore all but the first. However, we use 'dev' in the message (the current device found) instead of 'sb' (the one we want to use). Fix the message by using 'sb' and break the loop right away in this case. It's sufficient to tell the user once which LPC controller we'll use. Change-Id: Ibd27e40525fabe8c63b112691ad49fd994c70a48 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: http://review.coreboot.org/7342 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-11-06inteltool: Add support for Sandy Bridge desktop processorsFelix Held
Change-Id: I5e68b89c30d5550e4bce5c3e4c7b0689c38756bc Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/7337 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Mathias Krause <minipli@googlemail.com>
2014-11-05inteltool: Show more info on sandy/ivy.Vladimir Serbinenko
Change-Id: I408614e743ab6f0f447b327c01d8f4dacf787124 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6692 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-04inteltool/sandybridge: Kill mch_registers codepath.Vladimir Serbinenko
It never worked. Change-Id: Ic68614bb8ed481babf54b4f9d8db00635755f4d1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7324 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-04inteltool: Add support for Haswell ULT and Lynx Point LPDennis Wassenberg
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Change-Id: I2d5a31c831afeb92522b2673fde82922dc4efca5 Reviewed-on: http://review.coreboot.org/7275 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-11-02inteltool: refine GPIO and PMBASE/TCO printing on Ibex Peak/5 SeriesStefan Tauner
Nicolas Reinecke was noticing that in my Lenovo T410s logs the GPIO*3 settings were missing. This led to some investigation and this patch, thanks! Change-Id: I7ba28aa00d10f988a7fe81e61d2e216b54a11006 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/7239 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2014-08-26util/inteltool: fix typoIdwer Vollering
Change-Id: I8c30742f6cd759dce4c9641edad107d9e3154975 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/6766 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-13util/inteltool: Typo in dump output for 'GP_IO_SEL3'Edward O'Callaghan
The GPIO offset of '0x44 - GP_IO_SEL3' as specified in the pch.h header is incorrectly reported as 'GPIO_SEL3'. Change-Id: I56dcdda109d5f57ed45938d60b995807bdfb46b1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6459 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-11util/inteltool: Add pci ids for 4 northbridge models instead of 1.Damien Zammit
This patch supports northbridges: 0x0150 0x0154 0x0158 0x015c as 3rd gen core. Tested on 0x0150 (0x0154 previously only model). Change-Id: I53a33d864494dd4ac1cb9e8330450f56001ed92c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/5873 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-01-31utils: Install man pages as non-executable (chmod 644)Lubomir Rintel
This bothers rpmlint. Change-Id: I27d9cfac3ef6834ff87acc5a5ccbf332e59eeb1a Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: http://review.coreboot.org/5075 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-07-23inteltool: Print raw CPUID and make hexadecimal values unambiguousDamien Zammit
The raw CPUID is useful for matching the directories under 'src/cpu/intel' and is not easy to find out otherwise because it is most often decoded already. The decoded values are not obviously hexadecimal so prepend them with 0x to make sure they are unambiguous. The output differences look like this: - CPU: Processor Type: 0, Family 6, Model 25, Stepping 2 + CPU: ID 0x20652, Processor Type 0x0, Family 0x6, Model 0x25, Stepping 0x2 Change-Id: Id47f0b00f8db931f0000451c8f63ac1e966442c4 Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3788 Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Tested-by: build bot (Jenkins)
2013-06-23inteltool: add initial support for NehalemStefan Tauner
Also, add pretty printing of Westmere's DMI registers (tested on my t410s by staring at non-zero output values :) Apparently Nehalem does not have a MEMBAR? But there are some documented memory controller control registers in PCI configuration space... left out for now. The PCIEXBAR is not documented publicly AFAICT, but there is a similar register on a device on bus 0xFF. phcoder might know more... Change-Id: I5faadb6e4f701728f5290276c02809b4993bd86d Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3505 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-13util/inteltool: Add support for other 5 chipsetsStefan Tauner
e4e8e090fa36cb3a098e1ddf0ea44c796c140572 does add support for QM57, but there are many more that should work with that code(?). Does not explode on... CPU: Processor Type: 0, Family 6, Model 25, Stepping 2 Northbridge: 8086:0044 (1st generation (Westmere family) Core Processor) Southbridge: 8086:3b0f (QS57) Change-Id: I85e15ba45678a5bd635415a7a8d69c05bff8f7ef Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3321 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-05-27util/inteltool: Add support for mobile 5 chipsetVladimir Serbinenko
Dump registers on mobile 5. Successfully tested on X201. Change-Id: I606371801d3ae6c96d3d404c9775c254bd0ffbc9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/2993 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-04-15inteltool: pcie.c: Use `0xffULL` instead of `0xff` to avoid shift overflowPaul Menzel
When building inteltool with Clang, it warns about the following. $ clang --version Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2) Target: i386-pc-linux-gnu Thread model: posix $ CC=clang make […] clang -O2 -g -Wall -W -c -o pcie.o pcie.c pcie.c:297:40: warning: signed shift result (0xFF0000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] pciexbar_phys = pciexbar_reg & (0xff << 28); ~~~~ ^ ~~ pcie.c:301:41: warning: signed shift result (0xFF8000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] pciexbar_phys = pciexbar_reg & (0x1ff << 27); ~~~~~ ^ ~~ pcie.c:305:41: warning: signed shift result (0xFFC000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] pciexbar_phys = pciexbar_reg & (0x3ff << 26); ~~~~~ ^ ~~ 3 warnings generated. […] Specifying the length by using the suffix `0xffULL` fixes these issues as now enough bits are available. These issues were introduced in commit 1162f25a [1]. commit 1162f25a49e8f39822123d664cda10fef466b351 Author: Stefan Reinauer <stepan@coresystems.de> Date: Thu Dec 4 15:18:20 2008 +0000 Patch to util/inteltool: * PMBASE dumping now knows the registers. * Add support for i965, i975, ICH8M * Add support for Darwin OS using DirectIO [1] http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=1162f25a49e8f39822123d664cda10fef466b351 Change-Id: I7b9a15b04ef3bcae64e06266667597d0f9f07b79 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3015 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-14inteltool: Use portable type `uint64_t` instead of `u64`Paul Menzel
In [1] Idwer Vollering noted, that the type `u64` is not portable so on his FreeBSD system, the following warning is shown. $ clang -O2 -Wall -W -I/usr/local/include -c -o amb.o amb.c amb.c:441:22: error: use of undeclared identifier 'u64' ambconfig_phys = ((u64)pci_read_long(dev16, 0x4c) << 32) | The type `uint64_t` seems to be defined also on FreeBSD, so using this fixes the warning. Note, this warning is not reproducable with Debian Sid/unstable for example. I have no idea why though. [1] http://review.coreboot.org/#/c/3015/ Change-Id: Ic22f4371114b68ae8221d84a01fef6888d43f365 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3086 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08inteltool: remove unused file descriptor variable and ifdefsStefan Tauner
Change-Id: I6a119b1f362f481914377e8d14c713159f895130 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3030 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-05inteltool: use inttypes for prints in memory.cStefan Tauner
This fixes at least one warning on my machine where "llx" is replaced by PRIx64. Change-Id: Iee3e5027d327d4d5f8e6d8b2d53d051f74bfc354 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3024 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-05inteltool: cpu.c: Use conversion specifier `u` for unsigned integersPaul Menzel
Cppcheck [1], a static code analysis tool, warns about the following. $ cppcheck --version Cppcheck 1.59 $ cppcheck --enable=all . […] Checking cpu.c... [cpu.c:951]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list. [cpu.c:962]: (warning) %d in format string (no. 1) requires a signed integer given in the argument list. […] And indeed, `core` is an unsigned integer and `man 3 printf` tells the following about conversion specifiers. d, i The int argument is converted to signed decimal notation. […] o, u, x, X The unsigned int argument is converted to unsigned octal (o), unsigned decimal (u), or unsigned hexadecimal (x and X) notation. So use `u` and Cppcheck does not complain anymore. [1] http://cppcheck.sourceforge.net/ Change-Id: If8dd8d0efe75fcb4af2502ae5100e3f2062649e4 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3026 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-04inteltool: Cast to `intptr_t` instead of `uint64_t`Paul Menzel
When building inteltool under x86-32, the following warnings are shown. $ gcc --version gcc-4.7.real (Debian 4.7.2-15) 4.7.2 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ make […] amb.c: In function ‘amb_read_config32’: amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] amb.c: In function ‘amb_read_config16’: amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] amb.c: In function ‘amb_read_config8’: amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] […] Nico Huber commented the following [1]. I don't see those warnings because I build for x86-64. I guess they could be fixed by casting to `ptrdiff_t` (from stddef.h) instead of `uint64_t`. And indeed, using `ptrdiff_t` fixes the warning. But as Stefan Reinauer commented in [2], `intptr_t` is more appropriate as this is just a pointer and no pointer difference. So `intptr_t` is taken, which fixes these issues warned about too. These warnings were introduced in commit »inteltool: Add support for dumping AMB registers« (4b7b320f) [3]. [1] http://review.coreboot.org/#/c/2996/1//COMMIT_MSG [2] http://review.coreboot.org/#/c/3002/1/util/inteltool/amb.c [3] http://review.coreboot.org/525 Change-Id: I2ea1a31dc1e3db129e767d6a9e0433fd75a77d0f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3002 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-04-03inteltool: Use `ll` instead of `l` as the length modifier for `uint64_t`Paul Menzel
When buidling inteltool with GCC, the following warning is printed. $ make […] gcc -O2 -g -Wall -W -c -o memory.o memory.c memory.c: In function ‘print_mchbar’: memory.c:287:7: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘uint64_t’ [-Wformat] […] This was introduced in commit »inteltool: Add support for H65 Express chipset« (c7fc4422) [1]. Address this warning, by using `%llx` instead of `%lx`. [1] http://review.coreboot.org/1258 Change-Id: I4f714edce7e8b405e1a7a417d02fa498322c88a8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2994 Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Tested-by: build bot (Jenkins)
2013-04-01inteltool: Allow to override Makefile variablesPaul Menzel
Allow to override the variables `CC`, `INSTALL`, `PREFIX`, `CFLAGS` and `LDFLAGS`. Though append `-lpci -lz` to `LDFLAGS`. This way for example a different compiler can easily be used. CC=clang make As a side note, Clang in contrast to GCC does *not* issue the following warnings. $ clang --version Debian clang version 3.2-1~exp6 (tags/RELEASE_32/final) (based on LLVM 3.2) Target: i386-pc-linux-gnu Thread model: posix $ gcc --version gcc-4.7.real (Debian 4.7.2-15) 4.7.2 Copyright (C) 2012 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ make […] amb.c: In function ‘amb_read_config32’: amb.c:31:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:31:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] amb.c: In function ‘amb_read_config16’: amb.c:45:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:45:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] amb.c: In function ‘amb_read_config8’: amb.c:60:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] amb.c:60:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] […] These are only shown under 32-bit and not 64-bit $ uname -m i686 and are going to be fixed in a separate patch. Change-Id: Id75dea081ecb35390f283520a7e5dce520f4c98d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2996 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>