Age | Commit message (Expand) | Author |
2009-06-28 | This copy of flashrom is old and unmaintained. Delete it to avoid | Patrick Georgi |
2009-04-24 | MAX may already be defined. Also, fix smaller cosmetics (trivial). | Uwe Hermann |
2009-04-23 | flashrom: Support MX25L3235D | Stephan Guilloux |
2009-04-21 | flashrom: Support Macronix MX2512805D flash chip | Stephan Guilloux |
2009-03-06 | FreeBSD definitions of (read|write)[bwl] collide with our own. Before we | Carl-Daniel Hailfinger |
2009-03-05 | flashrom: Use helper functions to access flash chips. | Carl-Daniel Hailfinger |
2009-01-26 | flashrom: Driver for ST M29F002T/NT/B. T/NT TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
2009-01-26 | flashrom: SST25VF040B using 0x90 identification and AAI write. | Peter Stuge |
2009-01-26 | flashrom: Winbond SuperIO SPI driver. | Peter Stuge |
2009-01-26 | flashrom: Export Winbond SuperIO register access functions in board_enable.c. | Peter Stuge |
2009-01-26 | flashrom: Darwin / Mac OS X | Stefan Reinauer |
2009-01-26 | flashrom: Abstract mmap() in physmap.c and only open /dev/mem on the first ph... | Stefan Reinauer |
2009-01-26 | flashrom: Change flashrom.c:map_flash_registers() from int to void. | Peter Stuge |
2009-01-26 | flashrom: Change FreeBSD #ifdef into #if defined() | Stefan Reinauer |
2009-01-23 | flashrom: Check all mmap() calls and print helpful Linux error message. | Peter Stuge |
2009-01-07 | Add SST49LF020 support. | Sven Schnelle |
2008-12-15 | * add a generic preop-opcode-pair table. | FENG yu ning |
2008-12-10 | Add 28 flash chips of the MX29 series to the flashrom ID table and | Carl-Daniel Hailfinger |
2008-12-08 | Generates OPCODES struct from the ICH7/ICH9/VIA chipset if its SPI | FENG yu ning |
2008-12-04 | Add RDID/REMS IDs for the following flash chips: | Carl-Daniel Hailfinger |
2008-12-03 | Replace #ifdefs for sc520 systems by run time probing. | Stefan Reinauer |
2008-11-28 | If a chip has any TEST_BAD_* flag set, we don't even list the | Carl-Daniel Hailfinger |
2008-11-28 | Add support for the AMD/ATI SB600 southbridge SPI functionality. | Jason Wang |
2008-11-28 | Flashrom already has the following probe functions: | Carl-Daniel Hailfinger |
2008-11-18 | Check for failed SPI command execution in flashrom. Although SPI itself | Carl-Daniel Hailfinger |
2008-11-15 | The AT25 and AT26 series SPI chips from Atmel are plain EEPROMs. | Carl-Daniel Hailfinger |
2008-11-04 | Add support for 8 new chips to flashrom and fix up 2 existing chips | Carl-Daniel Hailfinger |
2008-11-03 | Add additional SPI sector erase and chip erase command functions to | Carl-Daniel Hailfinger |
2008-11-02 | Add support for the ST M50FW002 chip to flashrom. Identification only, | Carl-Daniel Hailfinger |
2008-10-29 | Flashrom support for some Numonyx parts (M25PE) | Stefan Reinauer |
2008-10-18 | Coding-style fixes for flashrom, partly indent-aided (trivial). | Uwe Hermann |
2008-10-07 | Support for AM29F002(N)B[BT]. Fully tested on AM29F002NBT. | Mats Erik Andersson |
2008-09-26 | Activate proper support for EN29F002(A)(N)[BT]. | Mats Erik Andersson |
2008-07-21 | flashrom: Winbond W39V040C and MSI K8T Neo2-F | Peter Stuge |
2008-07-07 | flashrom: Trivial SPI cleanups | Peter Stuge |
2008-07-06 | r3415 removed symbolic constants for device IDs by accident. | Carl-Daniel Hailfinger |
2008-07-06 | flashrom: Add AMIC A29002 | Andreas Thienemann |
2008-06-30 | First attempt to clean up SPI probing and create a common | Stefan Reinauer |
2008-06-30 | Mine AMIC flash chip needs 4 bytes RDID. Following patch adds support for that. | Rudolf Marek |
2008-06-30 | This patch adds support for VIA SPI controller on VT8237S. It is similar with | Rudolf Marek |
2008-06-27 | * ICH7 SPI support | Stefan Reinauer |
2008-06-22 | flashrom: Remove dead M-Systems Disk on Chip code | Peter Stuge |
2008-06-18 | flashrom: Add support for AMIC Technology A49LF040A and do not probe W29EE011... | Jens Kuehnel |
2008-06-18 | flashrom: Force read unknown flash chips | Peter Stuge |
2008-06-11 | flashrom: Add support for Amic Technology A29040B flash chip. | Peter Stuge |
2008-05-27 | Revert r3357 and fix it as intended to (forgotten header commit instead of typo) | Mart Raudsepp |
2008-05-22 | Add support for Amic A25L40P SPI flash. | Rudolf Marek |
2008-05-22 | Changes to make flashrom compile (and work) on FreeBSD. | Andriy Gapon |
2008-05-17 | flashrom: Support Pm49FL004/2 Block Locking Registers | Nikolay Petukhov |
2008-05-16 | Add support for SPI chips on ICH9. This is done by using the generic SPI | Dominik Geyer |
2008-05-15 | Lots of new SST flash chip IDs. Only a subset has been added to | Carl-Daniel Hailfinger |
2008-05-15 | Add support for the JEDEC RES (Read Electronic Signature and Resume from | Carl-Daniel Hailfinger |
2008-05-14 | Add more infrastructure for flashrom ICH9 support. | Carl-Daniel Hailfinger |
2008-05-14 | Check the JEDEC vendor ID for correct parity. Flash chips which can be | Carl-Daniel Hailfinger |
2008-05-14 | Add lots of ATMEL SPI flash chips to flash.h. | Carl-Daniel Hailfinger |
2008-05-13 | flashrom: Move all IT87xx specific SPI routines from spi.c to a separate | Carl-Daniel Hailfinger |
2008-05-12 | MX25L3205 and W25x40 have been confirmed to probe/read/erase/write OK | Carl-Daniel Hailfinger |
2008-05-12 | Add SST39VF512, SST39VF010, SST39VF040 support to flashrom. The SST39LF | Carl-Daniel Hailfinger |
2008-05-10 | flashrom: Rename generic_spi_*() functions to spi_*() | Peter Stuge |
2008-05-03 | flashrom: Add a tested bitmap field to the flash chip table. | Peter Stuge |
2008-04-28 | The generic jedec.c does not work for the ST M50FLW flash | Claus Gindhart |
2008-03-17 | Support for the Winbond W39V080FA series of chips. | Stefan Reinauer |
2008-03-14 | Re-add code erroneously removed in r3140. | Uwe Hermann |
2008-03-14 | Revert the delete of 82802ab.c in r3137. | Carl-Daniel Hailfinger |
2008-03-13 | Also print the chip vendor name in --list-supported output (trivial). | Uwe Hermann |
2008-03-12 | Add --list-supported option to flashrom which lists the supported | Uwe Hermann |
2008-02-06 | Handle JEDEC JEP106W continuation codes in SPI RDID. Some vendors like | Carl-Daniel Hailfinger |
2008-01-25 | Add ids and chip entry for Spansion S25FL016A to flashrom, tested, | Peter Stuge |
2008-01-19 | Support SPI flash chips bigger than 512 kByte sitting behind IT8716F | Ronald Hoogenboom |
2008-01-18 | for some reasons the externals did not get committed. | Stefan Reinauer |
2008-01-04 | Print at least the vendor for SPI flash chips if the exact chip ID is | Carl-Daniel Hailfinger |
2007-12-31 | Unfortunately, EN29F002T, EN29F002AT, EN29F002ANT, EN29F002NT all have | Carl-Daniel Hailfinger |
2007-12-31 | Add continuation ID support to jedec.c | Carl-Daniel Hailfinger |
2007-12-31 | This fixes a few vendor IDs to conform with JEDEC publication 106W | Carl-Daniel Hailfinger |
2007-12-17 | Add support for ST M25P05-A, M25P10-A, M25P20, M25P40, M25P16, M25P32, | Carl-Daniel Hailfinger |
2007-12-17 | To make it easier to add new SPI chips to flashchips.c, rename functions | Carl-Daniel Hailfinger |
2007-12-16 | Add support for ST M25P80 chips to flashrom. Detection was tested. | Carl-Daniel Hailfinger |
2007-12-10 | Add support for more atmel chips: | Frederico Silva |
2007-12-04 | Various coding style fixes, constification, fixed typos (trivial). | Uwe Hermann |
2007-10-30 | Add support for Intel 440MX systems. | Uwe Hermann |
2007-10-25 | Added Am29LV040B | Peter Lemenkov |
2007-10-22 | Flashrom: Add more Vendor IDs and ensure correct sorting in flash.h. | Peter Lemenkov |
2007-10-22 | Introduce block and sector erase routines to flashrom, but do not use | Carl-Daniel Hailfinger |
2007-10-18 | Add generic SPI flash erase and write support to flashrom. The first | Carl-Daniel Hailfinger |
2007-10-16 | Convert the existing it8716f_* functions to generic_spi_* functions by | Carl-Daniel Hailfinger |
2007-10-15 | Move SPI code out of board_enable.c where it started its life. The SPI | Carl-Daniel Hailfinger |
2007-10-02 | This patch aims to restructure SPI flash support in a more reasonable | Carl-Daniel Hailfinger |
2007-09-09 | Remove useless 'extern' keywords (trivial). | Uwe Hermann |
2007-09-09 | Add '(C)' where it's missing (for consistency reasons). | Uwe Hermann |
2007-08-30 | Add support for the Winbond W29EE011. | Markus Boas |
2007-08-30 | Add support for the Winbond W29C040P. | Markus Boas |
2007-08-29 | Change all flashrom license headers to use our standard format. | Uwe Hermann |
2007-08-23 | Drop a bunch of useless header files, merge them into flash.h. | Uwe Hermann |
2007-07-25 | This patch adds support for the M50FLW040A, M50FLW040B, M50FLW080A, | Carl-Daniel Hailfinger |
2007-07-24 | This patch adds support for ST M50FW040 and ST M29W040B to flashrom. | Carl-Daniel Hailfinger |
2007-05-24 | factor out register mapping code (trivial) | Stefan Reinauer |
2007-05-23 | big cosmetic offensive on flashrom. (trivial) | Stefan Reinauer |
2007-05-21 | Add support for the Winbond W39V040FA chip. | Uwe Hermann |
2007-05-09 | Fix coding style of flashrom by running indent on all files: | Uwe Hermann |
2007-04-28 | Add initial support for the following flash chips: | Uwe Hermann |