summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2023-04-26mb/google/myst: Enable tis_plat_irq_statusJon Murphy
This will fix: > [INFO ] Probing TPM I2C: tis_plat_irq_status() not implemented, wasting 20ms to wait on Cr50! BUG=b:277297687 TEST=builds Change-Id: I611a2855d94167748d0f82a478687fe2cdf5846a Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74286 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-26mb/google/myst: Configure WLANJon Murphy
Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used for WLAN. Mapping derived from myst schematic. BUG=b:275965982 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I5059be0bc011978e74ab4245e6ae037aa177ef9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/74113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-26mb/google/myst: Enable PCIe devices in devicetreeJon Murphy
Ensure that DXIO descriptors are updated using info from AMD and Myst board schematics. BUG=b:275960920,b:276744321 TEST=builds Change-Id: Icdad785bcb90de036095bcc4219c15f55f4277fe Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74112 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-26mb/siemens/mc_ehl4: Enable SD cardMario Scheithauer
This mainboard has SD slot available and therefore it should be enabled. Use the same SD card configuration as for mc_ehl2 mainboard. Change-Id: Icd9b25301311679cf93b05ba83a24e551261a020 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-04-26mb/siemens/mc_ehl4: Switch RTC type and connectionMario Scheithauer
This mainboard has the RTC RV-3028-C7 connected to the I2C1. TEST: - Console Log shows no errors for RV-3028-C7 during I2C1 init - Finalize device for I2C 00:52 shows correct date and time Change-Id: I1b4115d7844a0c218fdf92cb1af2da5a95eb4337 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74652 Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-26mb/siemens/mc_ehl4: Adjust USB settingsMario Scheithauer
Correct the USB settings, suitable for this mainboard. Change-Id: I943eb891e2f2d967acfd441c085063dbad49e993 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74651 Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-26mb/siemens/mc_ehl4: Change NC FPGA PCIe RP connection for POST codesMario Scheithauer
Since mc_ehl4 was only a copy of mc_ehl1 in a first step, the default value of the Kconfig switch EARLY_PCI_BRIDGE_FUNCTION must be set to '0'. On this mainboard NC FPGA is connected to PCIe root port #1 (00:1c.0). Change-Id: I15035523d8575d486c3f2d0ffe3916712ee89d7d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-04-26mb/siemens/mc_ehl4: Adjust GPIOsMario Scheithauer
Since mc_ehl4 was only a copy of mc_ehl1 in a first step, the GPIOs must be adjust according to the circuit diagram for this mainboard. Change-Id: I66bfbb380e9a05b3a2c08d5d1980e9749b46ee43 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-04-26mb/google/brya/var/omnigul: Disable Tccold HandshakeDtrain Hsu
The patch disables Tccold Handshake to prevent possible display flicker issue for Omnigul board. Please refer to Intel doc#723158 for more information. BUG=b:279539826 BRANCH=firmware-brya-14505.B TEST=Verify the build for Omnigul board Change-Id: I04e54df5afe09c12e1cf774445d57e13ffd8819e Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74737 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-26mb/{system76,msi}: Enable PchHdaAudioLinkHdaEnable via devicetreeSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iae2dc0a934f0ea3ca59d8a811f1daeedb090a7bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/71717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
2023-04-26soc/amd/phoenix/Kconfig: Update commentFred Reitberger
Fix copy-paste comment on closing endif Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I9671a9228c304988eb3903391f74a21d80d0a8bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/74734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-26AMD binaryPI: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
Change-Id: I799f61d13f7ae3ea753869ded282c14ed566793a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26soc/intel/common: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
For the first IOAPIC, use the common MADT generator with default IRQ overrides. Change-Id: Ie6e3eae1728a9a94205ec59557d4af1655191166 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26soc/amd: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
Change IRQ #0 to GSI #2 override to positive edge trigger from the bus ISA default (positive edge). Change-Id: I2de941071fca6f7208646a065a271fbf47ac2696 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74354 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26asus/p2b, emulation/qemu-i440fx: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
For uni-processor platforms, with SMP=n or MAX_CPUS=1, neither the LAPIC or IOAPIC MADT entries are added. Change-Id: I8777f4e3b37fe7b564189c6bf48e3988026b2361 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26aopen/dxplplusu: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
IRQ override from IRQ #0 to GSI #2 is changed from MP_BUS_EISA to MP_BUS_ISA. Change-Id: I115df037fd79e120b04e6aff9e53f963f045b997 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26soc/intel/baytrail,braswell: Use COMMON_MADT_IOAPICKyösti Mälkki
Change IRQ #0 to GSI #2 override to positive edge trigger from the bus ISA default (positive edge). Change-Id: I3a61a0ceb0e6e4a09570beef6d0170354eb498ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26intel/bd82x6x,broadwell,lynxpoint: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
Change IRQ #0 to GSI #2 override to positive edge trigger from the bus ISA default (positive edge). Change-Id: Iab3d38da9610ede1d338440b4a8ec0f1537c17e6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26sb/intel: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
i82801gx, i82801ix, i82801jx: Maintain IRQ #0 to GSI #2 override as positive edge trigger. ibexpeak, emulation/qemu-q35: Change IRQ #0 to GSI #2 override to positive edge trigger from the bus ISA default (positive edge). Change-Id: Ia8a04daf3a79d9f2f4801dc85e4975278e30dc8a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26ACPI: Add COMMON_ACPI_MADT_IOAPIC and CUSTOM_ACPI_MADTKyösti Mälkki
Add Kconfig COMMON_ACPI_MADT_IOAPIC to replace platforms' implementations of adding IOAPIC and IRQ override entries for ACPI MADT tables. Platforms that have a more complex MADT may continue to add custom entries using CUSTOM_ACPI_MADT. Change-Id: I0b77769f89cc319ad228eb37bc341e2150b8a892 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74348 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26arch/x86/ioapic: Promote ioapic_get_sci_pin()Kyösti Mälkki
Platform needs to implement this to provide information about SCI IRQ pin and polarity, to be used for filling in ACPI FADT and MADT entries. Change-Id: Icea7e9ca4abf3997c01617d2f78f25036d85a52f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26soc/intel: Introduce ioapic_get_sci_pin()Kyösti Mälkki
According to ACPI Release 6.5 systems supporting PIC (i8259) interrupt mechanism need to report IRQ vector for the SCI_INT field. In PIC mode only IRQ0..15 are allowed hardware vectors. This change should cover section 5.2.9 to not pass SCI_INT larger than IRQ15. Section 5.2.15.5 needs follow-up work. Care should be taken that ioapic_get_sci_pin() is called after platform code has potentially changed the routing from the default. It appears touched all platforms except siemens/mc_aplX currently program SCI as IRQ9. Change-Id: I723c207f1dcbba5e6fc0452fe1dbd087fad290ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26ACPI: Add acpigen_write_PTC()Kyösti Mälkki
Change-Id: Ibaf2d7105e7a5da8a50ef32b682978ff55fe31e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26cpu/intel/speedstep: Separate single SSDT CPU entryKyösti Mälkki
Change-Id: Ibe5d84c8fbff79cc73b01eee0980cbed71ceb506 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26acpi/acpi.c: Reduce scope of some functionsArthur Heymans
These functions are only used in one compilation unit. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I6f8282f308506a68b14ce3101f11078cb13709f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74756 Reviewed-by: Jan Samek <jan.samek@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-25mb/google/nissa/var/yaviks: Update devicetree for UFC usb portTony Huang
USB port 6 connects to a USB front camera, it should always probe. Remove probe by rear camera fw_config. BUG=b:273791621 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I554046718f6e0eb7197970f9a3808b3e1ea7f99c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-04-25mb/google/nissa/var/yavilla: Update devicetree based on FW_CONFIGTony Huang
Update devicetree -Enable USB2 port5 for WWAN -Update OVTI8856 setting -Update USB2/3 Type-A 0/1 port location Probe devicetree based on FW_CONFIG -pen garage -rear mipi cam -USB WWAN BUG=b:273791621, b:276369170 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I6cc7be2309483ce016bde57db34af078bd4d46b0 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-04-24mb/google/myst: Set system type to laptopJon Murphy
BUG=b:277294070 TEST=None Change-Id: I0aa4e0bcfb06e5e5cb7e9d52f2d82b5818925267 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74284 Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-24mb/google/myst: Store XHCI PCI resourcesJon Murphy
Implement `smm_mainboard_pci_resource_store_init` to store the resources for XHCI devices. These stored resources are later used by the elog code to log XHCI wake events. BUG=b:277273428 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I608d51f438681ac529323c23cc707845a3d609d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74281 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-24mb/google/myst: Enable gfx_hdaJon Murphy
Enable gfx_hda to allow for audio over hdmi. BUG=b:277219546 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I58096f1408f66f968af1494e487cf2bfc43b9a0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74278 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-24mb/google/myst: Enable crypto in devicetreeJon Murphy
Add the crypto device to the devicetree. BUG=b:277214359 TEST=builds Change-Id: I5394c5f9df64642d8633af84cf662652bd1a5cb2 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74275 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-24asus/p2b: Remove MADT LAPICKyösti Mälkki
Fix after 'commit 69a13964ea6c ("sb,soc/amd,intel: Add and use ACPI_COMMON_MADT_LAPIC")' broke interrupt delivery in kernel. Apparently combination of LAPIC without IOAPIC is too rare to be well supported. Change-Id: I5e2fbf358cf644665b897afb0a9404abb5ca1df2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74472 Reviewed-by: Branden Waldner <scruffy99@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-24soc/mediatek/mt8183: Fix set but unused variableArthur Heymans
This fixes a clang warning. Change-Id: I017ed8601e6ec4c66487e9a6f31e93251515e686 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-04-24vendorcode/mediatek/mt8192: Add or remove bracketsArthur Heymans
This fixes clang compilation warnings about logic problems and superfluous brackets. Change-Id: Ib4333b834ee2afb3147edf4c223724a851f159ba Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-04-24soc/mediatek/dptx.c: Remove set but unused variablesArthur Heymans
This fixes clang warning about set but unused variables. Change-Id: I3a3345e33380862d6939b61485f6d1eefa3d1815 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74547 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2023-04-23include/cpu/amd/mtrr: fix typo in get_top_of_mem_above_4gbFelix Held
Add the missing 'b' to the 4gb so that get_top_of_mem_above_4gb is in line with get_top_of_mem_below_4gb. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic9170372d8b0c27d7de3bd04d822c95e2015cb10 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/glinda: drop code for non-existing eMMC controllerFelix Held
Glinda doesn't have an eMMC controller and also doesn't have GPIO pins that eMMC signals can be multiplexed on, so drop the eMMC related code from Glinda. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I49ead01075780ea97dae99a36632f7659fd00587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74662 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-22soc/amd/phoenix: drop defines for non-existing eMMC controllerFelix Held
Phoenix doesn't have an eMMC controller, so remove the remaining eMMC- related defines. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I412c968479d23deb7f2e060b26b4a56ec9c764f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/mendocino: drop code for non-existing eMMC controllerFelix Held
Mendocino and Rembrandt don't have an eMMC controller and also don't have GPIO pins that eMMC signals can be multiplexed on, so drop the eMMC related code from Mendocino. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib8ec49a7084bdd62e480baee75a280fde8b13d01 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22mb/google/octopus: Add EC_HOST_EVENT_PANIC to SCI maskRob Barnes
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the Kernel when an EC panic occurs. If system safe mode is also enabled on the EC, the kernel will have a short period to extract and save info about the EC panic. BUG=b:268342532 BRANCH=firmware-octopus-11297.B TEST=Observe kernel ec panic handler run when ec panics Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I37e566e459f39f8bc2dafc3c3915260259730ca6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22mb/google/dedede/var/boxy: Generate SPD ID for supported memory partkevin3.yang
Add boxy supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K4U6E3S4AB-MGCL 2. Hynix H54G46CYRBX267 3. Micron MT53E512M32D1NP-046 WT:B BUG=b:278983561 TEST=Use part_id_gen to generate related settings Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com> Change-Id: I317f2b31774627706babdea10776af05ab692d1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-04-22mb/google/nissa/var/yavilla: Generate SPD ID to aligen with yaviksTony Huang
Yavilla board memory id setting references to yaviks. This CL aligen it with yaviks. DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) MT62F1G32D4DR-031 WT:B 1 (0001) H9JCNNNBK3MLYR-N6E 0 (0000) H58G56AK6BX069 2 (0010) K3LKBKB0BM-MGCP 2 (0010) H58G56BK7BX068 3 (0011) MT62F1G32D2DS-026 WT:B 3 (0011) K3KL8L80CM-MGCT 3 (0011) H58G66BK7BX067 4 (0100) MT62F2G32D4DS-026 WT:B 4 (0100) K3KL9L90CM-MGCT 4 (0100) H58G66AK6BX070 5 (0101) BUG=b:273791621 BRANCH=firmware-nissa-15217.B TEST=run part_id_gen to generate SPD id Change-Id: I4a5eb9e6e87a4adbc23f94f0eb92d5452c50e47c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22mb/google/brya/variants/hades: Swap LAN and SD Card PCIE PortsTarun Tuli
To aid in layout, the PCI ports for LAN and SD card were swapped. SD Card is now on RP3 (clksrc 4) LAN is now on RP8 (clksrc 3) BUG=b:269371363 TEST=builds Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: If59849c13e4c42f00e3571c0385994ade5931adb Reviewed-on: https://review.coreboot.org/c/coreboot/+/74630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22soc/intel/meteoerlake: set power limits dynamicallySumeet R Pawnikar
Set power limit values dynamically based on Meteor Lake CPU TDP and PCI ID of SKU. BRANCH=None BUG=b:270664854 TEST=Built and verified power limit values for 15W SKU on Rex board Change-Id: I20c9bc21dfa79696b07c460dbcedb4fa51838bdb Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22mb/google/brya/var/marasov: Disable USB2 PHY SUS well power gatingFrank Chu
The patch disables PCH USB2 PHY power gating to prevent possible display flicker issue. Please refer Intel doc#723158 for more information. BUG=b:279117758 BRANCH=firmware-brya-14505.B TEST=Verify the build for marasov board Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I5a5199be768fc59e2f053f8c50a49247145e7e72 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74627 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-22mb/google/corsola: Rename common config from `STARMIE` to `STARYU`Ruihai Zhou
The STARYU is the mt8186 detachable reference design, and the STARMIE is a variant of STARYU. Let's rename the common config from STARMIE to STARYU, and we can select the STARYU config for the follow up mt8186 detachable variant. BRANCH=corsola BUG=b:275470328 TEST=./utils/abuild/abuild -t google/corsola -a Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: If75e94e86420b0a216fe7a1a9dee9cb42bbd985c Reviewed-on: https://review.coreboot.org/c/coreboot/+/74654 Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-04-22samsung/lumpy: Use APMC definesKyösti Mälkki
Change-Id: I658596da1d84b486126d751b6066c3efd3f65290 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74523 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-22lib/version: Move board identification stringsKyösti Mälkki
These strings are now only expanded in lib/identity.c. This improves ccache hit rates slightly, as one built object file lib/version.o is used for all variants of a board. Also one built object file lib/identity.o can become a ccache hit for successive builds of a variant, while the commit hash changes. Change-Id: Ia7d5454d95c8698ab1c1744e63ea4c04d615bb3b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-22soc/amd/phoenix/xhci: add SCI sources for the two USB4 controllersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I95916e409b3fbd4941a861054733a34100244da9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/*/include/pci_devs: fix copy-paste error in PCIE_ABC_C_DEVFNFelix Held
Since it's an internal bus, it's PCIE_ABC_C_DEVFN and not PCIE_GPP_C_DEVFN. This also makes it consistent with the rest of the internal PCI buses. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ica8b666161c3cd3b0b4a29f8a4b0aff473b4d833 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/phoenix/include/soc/smi: add missing SCI map defines 61-63Felix Held
In the PPRs #57019 Rev 3.03 and #57396 Rev 3.04, SMITYPE_XHC3_PME, SMITYPE_XHC4_PME and SMITYPE_CUR_TEMP_STATUS_5 are defined, so add those defines. When doing the initial update for Phoenix, at least XHC3 and XHC4 PME events were missing from the PPR. Those two are the PME events of the two USB4 controllers. SMITYPE_XHC2_PME doesn't exist on this SoC. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic6fff9175b73cc9d0fd324d4a568a5761b92d078 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22cpu/amd/pi/00730F01: rename fixme.c to cpu_io_init.cFelix Held
Now that the code is in a much better shape and uses native coreboot functionality to perform the initialization, rename the file from fixme.c to cpu_io_init.c to be more descriptive of what it does. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I97d1ac2b12c624210c570f189f825409bd64f318 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74659 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-22soc/intel/cmn/cse: Make `cse_get_fpt_partition_info()` function staticSubrata Banik
The patch makes `cse_get_fpt_partition_info()` AP local/static as all the references to this function are in local to the cse_lite.c file. BUG=b:273661726 TEST=Able to build and boot google/marasov with this code change. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie50453946c8abe55c29e9001263f0264a73c8fac Reviewed-on: https://review.coreboot.org/c/coreboot/+/74388 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-22mb/google/brya: Enable CSE FPT Info config for NissaSubrata Banik
Google Brya variants like Nissa family selects `SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` to store CSE FPT information. BUG=b:273661726 TEST=Able to build and boot google/marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I234b5d272077de9a6f0a9ba69fa015cda7ebd56c Reviewed-on: https://review.coreboot.org/c/coreboot/+/74387 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-22soc/intel/alderlake: Implement `soc_is_ish_partition_enabled` overrideSubrata Banik
This patch implements `soc_is_ish_partition_enabled()` override to uniquely identify the SKU type between UFS and non-UFS to conclude if ISH partition is enabled and need to retrieve the ISH version from CSE FPT by sending HECI command. TEST=Able to uniquely identify the UFS and non-UFS SKUs while booting to google/marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7771aebb988f11d9d1b2824aa28e6f294fd67c25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74532 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-22mb/google/rex: Enable asynchronous End-Of-PostSubrata Banik
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post right after PCI enumeration and handle the command response at `BS_PAYLOAD_BOOT'. With these settings we have observed a boot time reduction of about 100ms on google/rex. TEST=Tests on google/rex with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show End-Of-Post after PCI initialization and EOP message received at `BS_PAYLOAD_BOOT'. Change-Id: I27b540eeddcada521eba91fcc51504831d6dc855 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-21mb/google/myst: Expose SKU and board ID to Chrome OSJon Murphy
Select EC_GOOGLE_CHROMEEC_SKUID and EC_GOOGLE_CHROMEEC_BOARDID to provide common routine for reading skudid and boardid from Chrome EC. BUG=b:277293398 TEST=builds Change-Id: I8e42ba23dada9771f335df34275e44e51d645596 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74283 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21soc/intel/meteorlake: Don't offer D3Cold when it's disabledSean Rhodes
Use D3COLD_SUPPORT Kconfig option to adjust the maximum supported sleep state in ACPI. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ifa55a19727e6adb6864158c2c323d08a0c22b996 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-04-21arch/riscv/trap_handler.c: Use new names for CSRArthur Heymans
sbadaddr and mbadaddr are deprecated names. This fixes compilation with clang. Change-Id: I5c8fa82b6131dec10f55e8ebcf36b34e30b57bad Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-04-21arch/riscv: Fix compiler argument for clangArthur Heymans
The suffixes zicsr and zifencei are assumed by default for clang. Change-Id: I75947f614c3600d5d9d461970159f0787fd6c3de Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-04-21mb/intel/mtlrvp: Enable RTD3 root port mutex for WWANCliff Huang
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3 and WWAN. The purpose of using this mutex is to prevent OSPM from calling _ON and _OFF methods while WWAN kernel driver is calling _RST, which accesses the GPIO pins. BUG=NA TEST=boot to OS and check the generated SSDT table for the root port. The RPMX mutex should be generated under the root port. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I5b53765453bac0fc96e9651ab347069c7c8bf058 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73384 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21mb/intel/adlrvp: Enable RTD3 root port mutex for WWANCliff Huang
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3 and WWAN. The purpose of using this mutex is to prevent OSPM from calling _ON and _OFF methods while WWAN kernel driver is calling _RST, which accesses the GPIO pins. BUG=NA BRANCH=firmware-brya-14505.B TEST=boot to OS and check the generated SSDT table for the root port. The RPMX mutex should be generated under the root port. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I809eb84cb1a09deb168040e83041b65237a1b576 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73383 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2023-04-21mb/google/brya: Enable RTD3 root port mutex for WWANCliff Huang
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3 and WWAN. BRANCH=firmware-brya-14505.B TEST=boot to OS and check the generated SSDT table for the root port. The RPMX mutex should be generated under the root port. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Ia87b5f9d8300d6263c84a586256424799d3a45b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73382 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21drivers/intel/ish: Hook get ISH version into `.final`Subrata Banik
This patch creates .final hook to call into get ISH version function if platform has required config (`SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION`) support. BUG=b:273661726 TEST=The ISHC version, 5.4.2.7779, was retrieved on the google/nivviks. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: Ib3f983d5de5b169474bcdb1e9e2934174a9dadf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74209 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21soc/intel/cmn/cse: Store ISH firmware version into CBMEMSubrata Banik
The patch stores the ISH in the CBMEM table. It verifies CSE has been updated by comparing previous and current CSE versions. If it has, the patch updates the previous CSE version with the current CSE version. It then updates the CBMEM table with the current ISH version. BUG=b:273661726 TEST=The current and old CSE and ISH versions are verified on the google/nissa during cold and warm reboots. Additionally, version updates are verified by a debug patch that purposely updated the stored cse version. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: Ie5c5faf926c75b05d189fb1118020fff024fc3e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-04-21{commonlib, soc/intel/cmn/cse}: Store CSE firmware version into CBMEMSubrata Banik
The patch implements an API that stores the CSE firmware version in the CBMEM table. The API will be called from RAMSTAGE based on boot state machine BS_PRE_DEVICE/BS_ON_EXIT Additionally, renamed ramstage_cse_fw_sync() to ramstage_cse_misc_ops() in order to add more CSE related operations at ramstage. This patch also adds a configuration option, 'SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION', which enables the storage of firmware version information in CBMEM memory. This information can be used to identify the firmware version that is currently installed on the system. The option depends on the `DRIVERS_INTEL_ISH` config and platform should be flexible enough to opt out from enabling this feature. The cost of sending HECI command to read the CSE FPT is significant (~200ms) hence, the idea is to read the CSE RW version on every cold reset (to cover the CSE update scenarios) and store into CBMEM to avoid the cost of resending the HECI command in all consecutive warm boots. Later boot stages can just read the CBMEM ID to retrieve the ISH version if required. Finally, ensure this feature is platform specific hence, getting enabled for the platform that would like to store the ISH version into the CBMEM and parse to perform some additional work. BUG=b:273661726 TEST=Able to build and boot google/marasov. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: I923049d2f1f589f87e1a29e1ac94af7f5fccc2c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-04-21mb/google/myst: Enable mp2 deviceJon Murphy
The mp2 PCI device is still present when no mp2 firmware is loaded. When this device isn't explicitly enabled in the mainboard's devicetree, the chipset devicetree default of the device being disabled is used. This results in coreboot's resource allocator not allocating resources to the device and since the bridge doesn't have enough MMIO space reserved, the Linux kernel can't assign resources to it. Enable the mp2 device in the mainboard's devicetree so that it gets its resources assigned by coreboot. BUG=b:277217097 TEST=builds Change-Id: I21885c51ff08846b456675090946f381843ef5e6 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74277 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21mb/google/myst: Enable audio co-processor in devicetreeJon Murphy
Enable the audio co-processor in the device tree. BUG=b:277214614 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I1e1749359804960bbd75d869385b9071e7f33be7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74276 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21mb/google/skyrim/var/markarth: Change to read the eMMC clkreq insteadJohn Su
Because WD SSD drive isn't holding the clock low for some reason. So we change to read eMMC clkreq signal instead. BRANCH=none BUG=b:278495684 TEST=emerge-skyrim coreboot chromeos-bootimage and verify ok. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I3a9225473a6ae1ba01dc8e5d982c4999f073267e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74583 Reviewed-by: Chao Gui <chaogui@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2023-04-21nb/amd/pi/00730F01/northbridge: remove unneeded AGESA.h includeFelix Held
TEST=Timeless build for pcengines/apu2 results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If95eb9e5135de2b256d1f584afcedfd6e0cf8d8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-04-21cpu/amd/pi/00730F01/fixme: replace some magic numbersFelix Held
TEST=Timeless build for pcengines/apu2 results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If96f4655a3b4dc621ef77c4d97d2927565d634ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/74617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21cpu/amd/pi/00730F01/fixme: use coreboot's PCI access functionsFelix Held
Use coreboot's native PCI access functions instead of using the vendorcode's PCI access functions to set up the CPU IO routing in function 1 of the HT PCI device. This file still has room for improvement, but at least it's now using coreboot-native functionality. Stoneyridge has a nicer implementation, but looking into possibly unifying those is out of scope for this patch. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ieecc0e5f6576a838d79220b061de81e21b5d976c Reviewed-on: https://review.coreboot.org/c/coreboot/+/74616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/phoenix: Mark PCIe GPP bridges as hidden instead of offMartin Roth
When one of the General-Purpose PCIe bridges is not used, it doesn't show up on the PCI bus at all, so coreboot notes it as an issue in the devicetree. This happens even if the device is marked as off. To solve this, we're marking the GPP bridge devices in devicetree as hidden, so they'll only show up in devicetree if they're actually used on a mainboard. BUG=b:277997811 TEST=Build Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I7b7577baa2dbb0ea7ebbcdb1a8ae81770e61d76f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74527 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21soc/amd/mendocino: Mark PCIe GPP bridges as hidden instead of offMartin Roth
When one of the General-Purpose PCIe bridges is not used, it doesn't show up on the PCI bus at all, so coreboot notes it as an issue in the devicetree. This happens even if the device is marked as off. To solve this, we're marking the GPP bridge devices in devicetree as hidden, so they'll only show up in devicetree if they're actually used on a mainboard. BUG=None TEST=Don't see the "PCI: Leftover static devices:" warning for these in the boot console. BRANCH=skyrim Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I517776e4dedc70e957a0c836ab3c2e5d49e156d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74526 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-21soc/intel/meteorlake: Add VPU into the DMAR SATC tablezhaojohn
This change adds the VPU into the DMAR SATC table in order to support the VPU IO virtualization. BUG=None TEST=Enabled the VPU, booted to kernel and verified that DMAR SATC table includeded the VPU entry. Change-Id: I6d4af7c9844e33483a1e616eaee061a90d0be6fc Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-21soc/intel/(adl, cmn, mtl): Refactor cse_fw_sync() functionSubrata Banik
This patch refactors cse_fw_sync() function to include timestamp associated with the CSE sync operation.This effort will ensure the SoC code just makes a call into the cse_fw_sync() without bothering about adding timestamp entries. TEST=Able to build and boot google/marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib5e8fc2b8c3b605103f7b1238df5a8405e363f83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-04-21soc/intel/cmn/cse: Refactor ramstage_cse_fw_sync() functionSubrata Banik
This patch refactors sleep type check inside ramstage_cse_fw_sync() to avoid additional logic while performing cse_fw_sync() operation. TEST=Able to build and boot google/marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7c7a91c81d51dbf6742e12c58a24b9f52fff5630 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-04-21mb/google/volteer/var/delbin: Add new memory supportFrank Chu
Add the new memory support: Samsung K4UBE3D4AB-MGCL BUG=b:274373361 BRANCH=firmware-volteer-13672.B TEST=FW_NAME=delbin emerge-volteer coreboot Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Ie88c25b4b0f88ed299711f2b6b94006d5301554c Reviewed-on: https://review.coreboot.org/c/coreboot/+/74556 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-21soc/amd/common/cpu/noncar/early_cache: use get_top_of_mem_below_4gbFelix Held
Use get_top_of_mem_below_4gb instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icc9e5ad8954c6203fc4762aa976bba7e8ea16159 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2023-04-21soc/amd/stoneyridge/memmap: use get_top_of_mem_below_4gbFelix Held
Use get_top_of_mem_below_4gb instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic673deb725a541c7535ae769f589cd82ea42a561 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/stoneyridge/northbridge: use get_top_of_mem_[below,above]_4gbFelix Held
Use get_top_of_mem_below_4gb and get_top_of_mem_above_4g instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I04f2a3744aee9beedaa97b154a652ce6f0c705c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/common/block/acpi/tables: use get_top_of_mem_[below,above]_4gbFelix Held
Use get_top_of_mem_below_4gb and get_top_of_mem_above_4g instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I35895340f6e747e2f5e1669d40f40b201d8c1845 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21Drop unused include <version.h>Kyösti Mälkki
Change-Id: I7d0718b5d2e0dd16eb90f63dd9d33329a2d808ba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21soc/intel/braswell: Replace <build.h> with <version.h>Kyösti Mälkki
To use generated build.h one should have had a pre-requisite in the Makefile. Reference coreboot_build_date from lib/version.c instead. Change-Id: Icd6fa2ddf8aa584b0f51ba130592f227bbdad975 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21drivers/ipmi: Replace <build.h> with <version.h>Kyösti Mälkki
To use generated build.h one should have had a pre-requisite in the Makefile. Reference coreboot_version from lib/version.c instead. Change-Id: I7f10acabf1838deb90fde8215a32718028096852 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21nb/amd/pi/00730F01/northbridge: use get_top_of_mem_[below,above]_4gbFelix Held
Use get_top_of_mem_below_4gb and get_top_of_mem_above_4g instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6332b051acf8d00ba6528360b18ea0d3c4dc30fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/74611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21include/cpu/amd/mtrr: return uint32_t from get_top_of_mem_below_4gbFelix Held
The top of memory below 4GB will always fit into 32 bits, so change the return type accordingly. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b463a17f2db3b7a99ff3572f318c9c22aac7431 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21include/cpu/amd/mtrr: rename functions to get top of memory regionsFelix Held
Rename amd_topmem and amd_topmem2 to get_top_of_mem_below_4gb and get_top_of_mem_above_4g to make it clearer what those functions return. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic6e98d94c731af74aea0ce276a9a7e4867e3986f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/phoenix: Update XHCI eventsJon Murphy
Set up SoC-specific XHCI defines and enable SOC_AMD_COMMON_BLOCK_XHCI to allow for XHCI events to be logged. BUG=b:277273428 TEST=builds Change-Id: I3ca4f84fb0f1fef8441ab6ef7b6f6348c52b2922 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74280 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21mb/google/myst: Enable AP <-> GSC communicationJon Murphy
Configure GSC I2C and Interrupt GPIOs during the early initialization. Add devicetree configuration for GSC device and enable the required config items. BUG=b:275959717 TEST=builds Change-Id: I6e235356b252a7b68a42da128ffd3189a829f117 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74111 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21aopen/dxplplusu: Drop ACPI C-states supportKyösti Mälkki
C0 clock throttling was disabled, no need to add _PTC. C2/C3 latency values were copy-paste from different CPUs. TBD: Check IO-trap Change-Id: Ia0e35e28f0df8b0f8fc58f70c7d792487ee4f7f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74439 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-04-21ACPI: Obsolete FADT duty_offset and duty_width fieldsKyösti Mälkki
After the obsoletion of Processor() it is necessary to provide _PTC package to define P_CNT IO address for clock throttling. The platforms touched here already emit empty _PTC to disable clock throttling. Change-Id: I0e84c8ccd2772c9b3d61f71b74324c8d28f4eefe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74438 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21ACPI: Obsolete FADT p_lvl2_lat and p_lvl3_lat fieldsKyösti Mälkki
After the obsoletion of Processor() it is necessary to provide _CST package to define P_LVLx IO addresses for C2/C3 transitions. The latency values from _CST will always replace those in FADT. Change-Id: I3230be719659fe9cdf9ed6ae73bc91b05093ab97 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21soc/amd/phoenix/xhci: Correct counting of xhci_sci_sourcesFred Reitberger
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Iabba97e003d1a5140c98e3fc5a3496f66f8795c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74528 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-21mb/google/brya/var/marasov: Add _DSD object for wifiFrank Chu
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it makes sense to have a unified name across different device drivers. BUG=b:278310435 BRANCH=firmware-brya-14505.B TEST=Verified that the _DSD object is still present in the SSDT. Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I5a69a47e67f6acaad5a5d1b67e437c5a41bebf3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74499 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21mb/google/dedede: Create boxy variantkevin3.yang
Create the boxy variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:277529068 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_BOXY Change-ID: Ief22eb000421c23abf6de3f99eb860bdae1e7919 Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-20soc/intel/common/block/pcie/rtd3: Fix source clock check condition for PM methodCliff Huang
srcclk_pin is 0-based and '0' is a valid clock source number. If srcclk_pin is set to -1, then the clock will not be disabled in D3. Therefore, clock source gating method should not be generated. BUG=b:271003060 BRANCH=firmware-brya-14505.B TEST=Boot to OS and check that rtd3 ACPI entries are generated as expected. For those PCI devices with RTD3 driver whose srcclk_pin to 0, the RTD3 entries should not be missing due to check error. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Ia831b8fd17572cc35765bd226d1db470f12ddd41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73889 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2023-04-20soc/intel/meteorlake: Send CSE EOP Async CMD earlySubrata Banik
This patch sends the CSE EOP command asynchronous implementation early as part of `soc_init_pre_device`. Without this patch the duration between asynchronous CSE EOP send and receive commands is not ample which causes idle delay while waiting for EOP response. The goal of the CSE async implementation is to avoid idle delay while capturing the response from CSE EOP cmd. This patch helps to create ample duration between CSE EOP command being sent and response being captured. TEST=Able to boot google/rex sku to ChromeOS and observed ~100ms of boot time savings (across warm and cold reset scenarios) Change-Id: I91ed38edbd5a31d61d4888e1466169a3494d635a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-20mb/google/myst: Add eSPI configurationJon Murphy
Add eSPI configuration for myst. Ensure the additional windows are used and remove unnecessary addresses from the range used on skyrim. BUG=b:275953893 TEST=builds Change-Id: I7b40adec78d4e0b596596fa6e2951c79bd3bd8c7 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74110 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/amd/phoenix/include/soc/pci_devs: update defines to match the PPRFelix Held
Parts of this file were still a copy of the file from the Mendocino SoC, so update the file to match the PPR #57019 Rev 3.03 and the chipset devicetree of the Phoenix SoC. Phoenix has 4 GFX/GPP PCIe bridges/ports, the numbering scheme of the GPP PCIe bridges/ports was changed so that the numbers match the device and function numbers, and there are new device functions for the IPU and the USB4 controller and router devices. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie9429c03839bb0199a04cd6cafe9a955ebdacc91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74565 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 07:22:56 +0000