| Age | Commit message (Collapse) | Author |
|---|
|
Align the C-state MSR value of BSP with AGESA.
BUG=b:162705221
BRANCH=none
TEST=Check the MSR value is correct and BSP can enter CC6 with AVT tool
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ib98d34af518439d338326446c20601867ad31690
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
a. USI_REPORT_EN is no longer set to high in coreboot. Instead
GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this
pad as required.
b. Add Delay after stop_gpio Low - 300ms
BUG=b:162263398
Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com>
Change-Id: I3d4dcb6e5cae5d9515abfd415315ec4114ca80b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44107
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5d3a5ede47aefc7cc2ee330f8a0bcded16138764
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44173
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I150591aa3624895c4c321101a251547dd23d1db5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44172
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Ideally don't need to mark the entire top_of_ram till TOLUD range (used
for stolen memory like GFX and ME, PTT, DPR, PRMRR, TSEG etc) as
cacheable for OS usage as coreboot already done with mpinit w/ smm
relocation early.
TEST=Able to build and boot ICL, TGL RVP.
Without this CL :
PCI: 00:00.0 resource base 77000000 size 4800000 align 0 gran 0 limit 0 flags f0004200 index 9
PCI: 00:00.0 resource base 7b800000 size 4400000 align 0 gran 0 limit 0 flags f0000200 index a
With this CL :
PCI: 00:00.0 resource base 77000000 size 8c00000 align 0 gran 0 limit 0 flags f0000200 index 9
No changes observed with MTRRs snapshot.
Change-Id: I64c14b14caf0a53219fdc02ec6bbd375955a0c8e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This cleans up some unneeded no-ops in the mainboard.c files
of baytrail boards.
Change-Id: I7662f6e860d672a99b211488122bec073cc78acf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This file only needs <stdint.h>. So replace <types.h> with <stdint.h>.
Change-Id: Ib58532837941d5324b28bc2c607d70555ce9caee
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44134
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DRAM support list
0x00 HYNIX HMA851S6CJR6N-VK
0x01 HYNIX H5ANAG6NCMR-VKC
0x02 Samsung K4A8G165WC-BCTD
0x03 Samsung K4AAG165WB-MCTD
0x04 Samsung K4A8G165WC-BCWE
0x05 HYNIX H5AN8G6NDJR-XNC
0x06 HYNIX H5ANAG6NCMR-XNC
0x07 Micron MT40A512M16TB-062E:J
0x08 Micron MT40A1G16KD-062E:E
0x09 Samsung K4AAG165WA-BCTD
0x0A Samsung K4AAG165WA-BCWE
BUG=b:161579679
BRANCH=master
TEST=build
Change-Id: Ib9fa5ae98568d659326d431a4006174a343fa299
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add Alder Lake specific CPU, System Agent, PCH (Alder Point aka ADP),
IGD device IDs.
Document Number: 619501, 619362
Change-Id: I17ce56a220e4dce2db2e0e69561b3d6dac9e65a2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Other Intel northbridges do this.
Tested with BUILD_TIMELESS=1, Asus P5QL PRO does not change
Change-Id: I50785b7bf3e3cc0eade7fda4b4b2e2bb71a54c31
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This reverts commit ad247ac5d8ef4a38bd1d61fbd28076f343a46c5c.
It doesn't work like this. The `dev->enable` field has already been
updated and is always `0` at this point.
Change-Id: I5b3560dcea2f226c841f4823526db2fdab149d22
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: I2446d536603559f637f3f8b1b44e9d712aa35492
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: Ib5ef5e006e590d72bec52e057e9b72150e0e636f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: I4ee3ae6c45e2a2c921fbccbb62b853e4a141a58d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: I1f84cae41c6281e0d545669f1e7de5cab0d9f9c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The call to `decode_pcie_bar` always initializes these values.
Change-Id: Iffdb2fc846a6fc1a1abc504370b6283e292b61c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Some fields in GNVS seem to be copied over from Apollolake to
Stoneyridge to Picasso. This patch removes the unused fields.
BUG=b:161165393
TEST=Mandolin still boots and dmesg shows no new ACPI errors.
Change-Id: I8c6b580543089bf0180a7caeb9e6a47dc4ed4a1d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Constify and eliminate local variables where possible to ease reading.
Tested with BUILD_TIMELESS=1, Asus P5QL PRO does not change.
Change-Id: I6d2937146a4764823cfc45c69a09f734b2525860
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Other northbridges have a `decode_pcie_bar` function. Since it's not
needed anywhere else, keep it as a static function for now.
Change-Id: Ide42ffcebb73c3e683e0ccaf0ab3aeae805d1123
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We can use `decode_pcie_bar` instead, if we make it non-static.
Change-Id: Ic39f3df0293b4d44f031515b1f868e0bb9f750c9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Turn it into `decode_pcie_bar`, taken from gm45.
Change-Id: I81a398535f18ced10b5521bddcf21f3568e1d854
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: I9c69028ff13efa6999b6110fbcd9233a09def991
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
While we are at it, also reflow a few lines that fit in 96 characters.
Tested with BUILD_TIMELESS=1, Getac P470 does not change.
Change-Id: I2cc3e71723e9b6898e6ec29f0f38b1b3b7446f09
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This brings Ironlake closer to Sandy Bridge.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: Idde75e7295f642f8add34168bffe5851ea02fbc6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43687
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical.
Change-Id: Ie3570cd0a75c6b34581b35165c1c6393214ad0bb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Rename it and make it return an int, like other northbridges do.
Change-Id: I8bbf28350976547c83e039731d316e0911197d54
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add `decode_pcie_bar` for consistency with other Intel northbridges.
Change-Id: If04ca3467bb067b28605a3acccb8bda325735999
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Constify and eliminate local variables where possible to ease reading.
Tested with BUILD_TIMELESS, Foxconn D41S remains identical.
Change-Id: Iaad759886a8f5ac07aabdea8ab1c6d1aa7020dfc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Rename it and make it return an int, like other northbridges do.
Change-Id: Id526ff893320a77e96767ec642c196c2196f84e1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Also constify a local variable while we're at it.
Tested with BUILD_TIMELESS=1, Foxconn D41S does not change.
Change-Id: I90ab35932d7c0ba99ca16732b9616f3a15d972dd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This change adds support for pen insert/eject operations in S0 and
wake on pen eject from S3 for vilboz.
BUG=b:157628650
Change-Id: I7ba0881b67dfb67c032667d591f7d1806a50af22
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add Kontron/bSL6 together with Siemens/Boxer26, a baseboard for the
bSL6.
The plain bSL6 variant received little testing and only during early
development. The Boxer26 variant is actively used and fully tested.
The latest rebase was boot tested with FILO and Linux 4.19.
Change-Id: If2b6a3f1e9dd095463f1f1521068b9f66a9189c5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29480
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is the same for the two Bay Trail boards in the tree.
Change-Id: I5110cfa8807406232e4f7f1fe79dfe9c3ae4dac4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
|
|
They default to zero already, so we might as well drop them.
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I3c04240b270f51d584f879e1344301679f133fdb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43928
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The call to `decode_pciebar` always initializes these values.
Change-Id: Ide45e1e5e8b8d6cfebd2fc4e272b1971b0a9b346
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We can use `decode_pcie_bar` instead, if we make it non-static.
Change-Id: I4d005290355e30e6fdaae3e8e092891fddfbe4fc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: Ibfa9a6fa7818d0bd79d2c0d9331c0ca38a2b7fe3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
While we are at it, also reflow a few lines that fit in 96 characters.
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: Icaca44280acdba099a5e13c5fd91d82c3e002bae
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42189
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use tabs instead of eight (sometimes less) spaces.
Change-Id: Ic3d61f5210d21d9613fc50b47b90af71f544169a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Iede1452cce8a15f85d70a3c38b4ec9e2d4a54f9e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove const struct imd *imd and const struct imdr *imdr parameters from
the prototypes of imdr_entry_size(), imd_entry_size() and imd_entry_id()
functions since they are not used anywhere.
Signed-off-by: Anna Karas <aka@semihalf.com>
Change-Id: I6b43e9a5ae1f1d108024b4060a04c57f5d77fb55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43999
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib7c6ab0a2e5a03f30b70c4bbb1091fa9c689c23b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44094
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In kernel clk for AMD SoCs we expose a generic clk by the name oscclk1.
This oscclk1 is a fixed 48Mhz frequency clk in RV.
In Zork oscout system clock is linked to rt5682 mclk. Setting mclk-name to
oscclk1 tells rt5682 driver its mclk is oscclk1.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
BUG=b:158906189
TEST=rt5682 driver get the correct clk and tested audio playback
Change-Id: Ic565e8e0573e085e5759b2d3688cc0a4533b67fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
RV has difference in clk framework. In RV we get a 48Mhz fixed clk,
while in ST we had 25Mhz, 48mhz clocks and a Mux to select between them.
To differentiate set the fmw property to 1 for boards using RV family of SoC.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
BUG=b:158906189
TEST=rt5682 driver get the correct clk and tested audio playback
Change-Id: I685ded1607c2c7edc5e48f0bada258ebde192bb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Single channel DDR3L: requires mrc.bin (extracted from ChromeBook
firmware)
- Tested, working with: 2GB SK Hynix stick, 4GB Samsung stick
- VGA: Video works with VGA rom extracted from UEFI
- SeaBIOS (runs the option rom) tested, works in text mode
- GRUB2 (coreboot runs the option rom) tested, works in VESA mode,
no video in text mode
- USB: Both USB2.0 ports work using the EHCI controller
- Works in both SeaBIOS, GRUB2 and Linux
- Serial: driven by an IT8728F SuperIO
- Works as a console in coreboot, SeaBIOS and GRUB2
- Works with interrupts in Linux after a cold boot, after a warm
reboot IRQs get lost
- SATA: 2 ports on board (one is mSATA)
- SATA init works with both refcode.elf and native refcode
(patch CB:43133)
- Booting from SATA works with GRUB2, SATA works in Linux
- Patch CB:44088 fixes SATA in SeaBIOS
- 4 PCIe Intel ethernet controllers
- Only tested in Linux, all 4 work with the igb driver
- Power button, reset button and both indicator LEDs work
- Optional fan header is not tested as the appliance is passively
cooled
- TXE (ME): optional, does not shut down after 30 minutes without the
TXE blob
- Works with TXE blob left as is, shows up on PCI
- Works with the entire TXE section wiped, no device on PCI,
intelmetool can't find anything
Used rambi as an example, but almost everything is modified as the two
boards are very different.
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I99ed0c94c3255578151f940ad9b274e6f0816bfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- The Bay Trail MRC fails to read the SPDs from SMBus.
- Instead the SPDs are read into a buffer and the buffer is passed to
the MRC.
Change-Id: I7f560d950cb4e4d118f3ee17e6e19e14cd0cc193
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44092
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This follows CB:44047 which probably missed this because it's a
custom assert macro (in code that has only recently been added to
build checks). Without this change, building with gcov fails because
gcc_assert(0) can be build-time verified (as introduced by CB:44044)
while we need runtime failure semantics here.
Change-Id: I71a38631955a6a45abe90f2b9ce3a924cc5d6837
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Before this change, we have this problem (boot log from DeltaLake
config A server):
Jumping to boot code at 0x00040000(0x755f6000)
Stack overrun on CPU0 (address 0x7574a000 overwritten). Increase stack from current 4096 bytes
ERROR: BUG ENCOUNTERED at file 'src/lib/stack.c', line 43
Linux version 4.16.18
Configure STACK_SIZE to make it larger to fix above problem.
Now, we have this boot log:
BS: BS_PAYLOAD_LOAD exit times (exec / console): 326 / 21727 ms
Jumping to boot code at 0x00040000(0x752f2000)
CPU0: stack: 0x75746000 - 0x7574a000, lowest used address 0x7574681c, stack used: 14308 bytes
Linux version 4.16.18
TESTED=booted YV3 config A to target OS.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ia04a3ee0cd37177ecab65469855a1cf920742458
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CPX-SP FSP is FSP 2.2, so select PLATFORM_USES_FSP2_2. SKX-SP continues
to select PLATFORM_USES_FSP2_0, as SKX-SP FSP is FSP 2.0.
Correct DCACHE_RAM_BASE. Increase FSP_TEMP_RAM_SIZE, DCACHE_BSP_STACK_SIZE,
and adjust DCACHE_RAM_SIZE accordingly. Thus the workaround of hardcoding
StackBase and StackSize FSP-M UPD parameters is removed.
Add CPX-SP soc implementation of soc_fsp_multi_phase_init_is_enable()
to indicate that FSP-S multi phase init is not enabled, since it is
not supported by CPX-SP FSP.
TESTED=booted YV3 config A to target OS.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I25e39083df1ebfe78871561b0a0e230b66524ea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44049
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some settings are suspicious, and have been annotated with FIXMEs.
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I7755867cb92745f542a4261db5dd118ca905612b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I4d878b5dbb5a5617143240b8f5bc5b6f5a754511
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I8feff0d71ad70ac994e29b238d35e2c73aa92ecd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I44db564c757647f493e92d35602178ef8b722517
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Like the QPI Link device, there can be more of these devices on
multi-socket platforms. So, name it Physical Layer 0.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: Ia5f6e42a742bc69237de38f1833e56c8da7c4f7e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: Id226a2fdcbd0fe48822c4f65746e14fb00db6b2e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On multi-socket platforms, there can be two QPI buses, each with its own
PCI device. We only have one QPI link on Arrandale, though. In case
support for multi-socket processors ever gets added, name it Link 0.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I6481154a2d1cc1c84c1f167a374a62af3b2cf3d8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I66b87d15f6b741c6fc935106c35b201fbd9ab2c6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This register resides within the SAD's config space, and is 64-bit.
Change-Id: I19458f7c6be6b1a5fcd47ac93ee0597f1251a770
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Let's hope this cheers up the poor System Address Decoder device.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: Ia62c05abb07216dc1ba449c3a17f8d53050b5af1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Only some registers have such a prefix. Drop it for consistency.
Change-Id: I1ef7307d10a06db8f3c1a05bd9184f21fceb9d90
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Uppercase variable names can be confused with register definitions. Use
lowercase names instead, conforming to the coding style guidelines.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I61a28bf964ea8c2c662539825ae9f2c88348bdba
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This is the only instance of `BETTER_MEMORY_MAP` in the tree.
Change-Id: I118e5b5a0f10da56e2335828477caed81c5bf855
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This register does not seem to exist on Ironlake.
Change-Id: I3fba6a3fd443f2c9eab874e1d1b8f081f58b1536
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove duplicated definitios and sort them by ascending offsets.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: Idcfa64a39c12a4ac06a342ef9b51a01b806d4c84
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Looks like some registers are defined twice. Also, group some QPI
registers together. They were scattered around and mixed with the host
bridge registers, probably because other northbridges have such
registers in the host bridge's PCI config space. But not Ironlake.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I6e60f7fcb1467f302618eeab1b0d995920a98569
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Sort them by ascending offsets.
Tested with BUILD_TIMELESS=1, Foxconn D41S does not change.
Change-Id: I521aa3e49b17a9fb6b279ae758801356e510d054
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Foxconn D41S remains identical.
Change-Id: I12d6adb8f130599a33d71d7c9f71914ee7c9e8ef
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Asus P5QL PRO remains identical.
Change-Id: I8d68a1dd49769ac49009a8e628f7994bf461a05f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Asus P5QL PRO remains identical.
Change-Id: I2c59099f6ff0e9162c700c888fb8fbb3906b65e6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Observed thermal shutdown initiated by DPTF due to CPU temperature
reaching critical temperature trip value. During stress testing with
heavy workload like WebGL Aquarium, sometime CPU temperature spikes
till 99 degree Celsius and DPTF initiates system shutdown. This
updates CPU critical temperature trip value to 105 degree Celsius
to avoid system shutdown.
BUG=b:161993459
BRANCH=None
TEST=Built and tested on dedede system
Change-Id: If15a873a997aa80f20940f27bbafd4498908c091
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44054
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Support 8GB MT53E2G32D4NQ-046 discrete DDR bootup.
BUG=b:159301679
BRANCH=kukui
TEST=Boots correctly on Kukui.
Change-Id: Ide01f029c5ebd6c3ae6350f73f3c60b818d51353
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Implement setting processor information to BMC based on
document YosemiteV3_BMC_Feature_Spec_v1.7.
TEST=Use get command in OpenBMC to check.
Command and information are shown as below:
root@bmc-oob:~# ipmi-util 1 0xd8 0x11 0x4c 0x1c 0x00 0 1
DC 11 00 47 65 6E 75 69 6E 65 20 49 6E 74 65 6C 28 52 29
20 43 50 55 20 30 30 30 30 25 40 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00
root@bmc-oob:~# ipmi-util 1 0xd8 0x11 0x4c 0x1c 0x00 0 2
DC 11 00 1A 34 00 DC 05 41 30
root@bmc-oob:~#
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I3d53ac241a11ca962572816283a0c653fcde9f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some UPD options are already set in `xeon_sp/cpx/romstage.c`. Remove
them from the board configuration to avoid duplicating this code.
Change-Id: Ic79245103c33427e06c7ea881be778e3d219c45f
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43924
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to src/vendorcode/intel/fsp/fsp2_0/cooperlake_sp/FspmUpd.h,
use FSP_M_CONFIG structure fields to configure UPD options for FSP-M
in romstage instead of raw offsets.
Change-Id: Idb25d8954b09805b496ab97b341a8ef1ac38bb6a
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add RTL8822CE support for Madoo.
BUG=b:162390420
BRANCH=None
TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage, build successful
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I6e471be2b2856977e6f728d5a2ca78942725bea6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
1. Add Elan touchpad support.
2. Follow schematic to disable I2C1 and I2C3.
BUG=b:160869188,b:161407664
BRANCH=NONE
TEST=emerge-dedede coreboot chromeos-bootimage", build successful
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I154a1ff2597968d200d1d0693718f90cd2744616
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Add Goodix touchscreen support.
BUG=b:160868197
BRANCH=None
TEST=emerge-dedede coreboot chromeos-bootimage", build successful
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I9bf27d69d0895cb4ea8620a6da49e98d25e05c23
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44012
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add _DSM method
2. Add support to turn on/off the power enable signal in _PS0/_PS3
methods.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I4f944caa535bdc946eef1e0f518fe3ee344187b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Converts bit fields macro to target PAD_CFG_*() macros, which were
hidden in the comments. To do this, the following command was used:
./intelp2m -n -t 1 -p apl -file ./test/up-gpio.h
This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":
CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I266ec6fa10a9691a7b7d3cd6f2792624e8bd53d5
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch excludes bit fields that must be ignored in order to convert
current macros to target PAD_CFG_*() macros. The following commands
were used for this:
./intelp2m -ii -fld cb -ign -t 1 -p apl -file ./up-gpio.h
This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":
CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG
Change-Id: Ic9b6e63c1b84b97726886bef35c434dd9153eb78
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Use the intelp2m utility [1] with -fld=cb options to convert the pad
configuration format with the raw values of the DW0 and DW1 registers
to the format with the bit fiends macros: PAD_FUNC(), PAD_RESET(),
PAD_TRIG(), PAD_BUF(), PAD_PULL(), etc... Also use the -ii options to
generate the target macro in the comments, so that it is easier to
understand what result we should get:
./intelp2m -ii -fld cb -t 1 -p apl -file ./up-gpio.h
This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":
CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG
[1] https://review.coreboot.org/c/coreboot/+/35643
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I2523439af8842365c7de901bdfad85ad16d25dcf
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
From a log of a machine using Crystal Well CPU [1], Crystal Well CPUs
use some new PCI IDs. Without this patch, the Crystal Well northbridge
cannot be initialized in ramstage, thus the machine cannot boot. Some
PCI IDs of Crystal Well related devices can be found in the PCI ID
database [2].
Tested with i5-4570R (with LGA1150 mod) on ASRock H81M-HDS. The board
boots to SeaBIOS with boot screen displayed on HDMI output, and then
boots Arch Linux on a USB disk.
[1] https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/DNHLQTNTRQT43T67DG7L2HVI5CV74ZCM/
[2] https://pci-ids.ucw.cz/read/PC/8086
Change-Id: Icfe55323fd06187148c788ebfa7b679b6944e4f3
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41658
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ife4ae71fd977d32d7b11ee7e2a1a7e2ec3eec52f
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Without this change, there will be no console output when using a
Crystal Well CPU.
Tested with i5-4570R (with LGA1150 mod) on ASRock H81M-HDS.
Change-Id: Id18645c52d9c4a4ea7acb602bcb39b796d9e24b9
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Many places in coreboot seem to like to do things like
assert(CONFIG(SOME_KCONFIG));
This is somewhat suboptimal since assert() is a runtime check, so you
don't see that this fails until someone actually tries to boot it even
though the compiler is totally aware of it already. We already have the
dead_code() macro to do this better:
if (CONFIG(SOME_KCONFIG))
dead_code();
Rather than fixing all these and trying to carefully educate people
about which type of check is more appropriate in what situation, we can
just employ the magic of __builtin_constant_p() to automatically make
the former statement behave like the latter.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I06691b732598eb2a847a17167a1cb92149710916
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
I would like to make assertions evaluate at compile time where possible,
but sometimes people used a literal assert(0) to force an assertion in a
certain code path. We already have BUG() for that so let's just replace
those instances with that.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I674e5f8ec7f5fe8b92b1c7c95d9f9202d422ce32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
According to my SC7180 reference manual, these three GPIOs are in the
NORTH TLMM, but our pin table lists them as SOUTH. That means all
accesses our code has been doing to them have just been hitting empty
address space.
BUG=b:160115694
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If9c03ac890a7975855394c2e08b8433472df204d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Adding implementation of standard library strstr()
See https://review.coreboot.org/c/coreboot/+/43741 for context.
Change-Id: I63e26e98ed2dd15542f81c0a3a5e353bb93b7350
Signed-off-by: jbk@chromium.org
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
ACPI_GPIO_IRQ_EDGE_BOTH sets both edges as wake. The desired behavior is wake on rising edge, change to ACPI_GPIO_INPUT_ACTIVE_LOW.
Fixing for both Volteer and Volteer2 variants.
BUG=b:146083964
BRANCH=None
TEST=tested on a Volteer
Change-Id: I2d3339151bf4e2cbae60aaf97ba1bd7909a2b9a9
Signed-off-by: Alex Levin <levinale@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Fix multiple issues allowing to boot until "Payload not loaded":
* The FMAP_CACHE was placed in memory mapped flash
- Place the FMAP_CACHE in DRAM.
* The FMAP_CACHE was overlapping the BOOTBLOCK, which has a default size
of 128KiB.
- Increase the bootblock size in memlayout to 128KiB to match the FMAP.
* The heap in bootblock wasn't usable.
- Add a linking check in armv7 common bootblock to relocate itself to
the linked address.
* A FIT payload couldn't be compiled in as the POSTRAM_CBFS_CACHE was
missing.
- Add the POSTRAM_CBFS_CACHE to memlayout.
* The coreboot log is spammed with missing timestamp table error messages
- Add TIMESTAMP table to memlayout.
Tested on QEMU armv7 vexpress.
Change-Id: Ib9357a5c059ca179826c5a7e7616a5c688ec2e95
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The 'burnet' and 'esche' in Kconfig.name should have two spaces
after the arrow.
BUG=None
TEST=make menuconfig
BRANCH=kukui
Change-Id: If7cc31cf459082a797445fb8223b3d9cbde72901
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43986
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Avoid dereferencing a null pointer.
Found-by: Coverity CID 1430549
BUG=None
TEST=Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I53f6a38aac6e7f94c3c370996b3b82ca0d88dac4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update ELAN i2c-hid touchpad configuration
BUG=b:160741785
BRANCH=None
TEST=Verify touchpad is working fine.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I2549048766d0707666910bd86c46ac9201bf3905
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43998
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For dirinboz
DRAMID 0x9: K4AAG165WA-BCTD
BUG=b:161579679
BRANCH=master
TEST=build
Change-Id: I28c0d23f96c5b9c975ffead3a1cac66cbda8c293
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
PCIe bus:function specifiers need to be coalesced the same way
functions are coalesced during bus enumeration. Invoke PCIe root port
devicetree update to swap the enabled root port devices with the
disabled devices.
At this point, the TGL pci_devs.h only describes the PCH-LP, so only
the PCH-LP root ports are listed in this patch. We'll need to add
additional PCIe root ports when PCH-H support is added.
BUG=b:162106164
TEST=Ensure that the PCIe device 1c.7 corresponding to Root port 8 is
swapped with the PCIe device 1c.0 corresponding to Root port 1.
Change-Id: I9230de8b1818f3f2115dab923841fd0e7778be62
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change updates the mipi_camera driver to handle shared power
resource between multiple cameras. This is achieved by adding a guard
variable and methods to manipulate the guard variable before calling
the actual platform method which enables or disables the resource.
PowerResource will call these guarded methods to enable or disable the
resource. This protects the shared resource from being enabled or
disabled multiple times while the other camera is using the resource.
Example:
Consider a platform where two cameras are sharing a GPIO resource 0xXX
and both the cameras calls enable and disable guarded methods for this
GPIO. Actual platform disable method for the GPIO is called only after
the last camera using the GPIO calls DSBx method and RESx becomes 0.
Scope (\_SB.PCI0)
{
Name (RESx, Zero)
Method (ENBx, 0, Serialized)
{
If ((RESx == Zero))
{
\_SB.PCI0.STXS (0xXX)
}
RESx++
}
Method (DSBx, 0, Serialized)
{
If ((RESx > Zero))
{
RESx--
}
If ((RESx == Zero))
{
\_SB.PCI0.CTXS (0xXX)
}
}
}
Change-Id: I1468459d5bbb2fb07bef4e0590c96dd4dbab0d9c
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43003
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also document the maximum nuber of lanes for the different platforms.
Change-Id: I52356d4bbb407ee8a36fce18ad94d73f39c01345
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44069
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Giant commit aee7ab2 (soc/intel/braswell: Clean up) reformatted comments
to follow the coding style, among many other things. This commit updates
some comments on Bay Trail with two objectives: follow the coding style,
and reduce the differences between Bay Trail and Braswell.
Tested with BUILD_TIMELESS=1, Google Ninja remains identical.
Change-Id: Ibe942a20c624e2c74801c8816616ec83851949af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
SeaBIOS on Bay Trail would time out when trying to access a SATA drive.
Turns out that there's two mistakes in the SATA initialization sequence:
- PCI register 0x94 is wrongly cleared with a bitwise-and operation.
- PCI register 0x9c is instead written to 0x98, clobbering the latter.
After correcting them, SeaBIOS can boot from SATA on Asrock Q1900M.
Change-Id: I5cc4b9b1695653066f47de67afc79f08f0341cc5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44088
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- This is a reverse engineered re-implementation of refcode.elf on
Bay Trail
- Tested on GBYT4, should work everywhere as it's meant to behave
exactly the same as the binary refcode
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I91977c509022b0078804dc151d27296260e24bc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43133
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
