| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I40e2e5a786499abbe2fce63d6e0f1ac1e780ab51
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I26c2abfce3417ed096d945745770fcae91a1e4ad
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81814
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Set orientation of KD_KD101NE3_40TI to LB_FB_ORIENTATION_RIGHT_UP to
align the volume up/down direction with menu up/down in FW screen.
BUG=b:331870701
TEST=emerge-staryu coreboot chromeos-bootimage, and check FW screen on
wugtrio, test volume key behaves as expected.
BRANCH=corsola
Change-Id: Ie101cc8b983d3d16587f88fa787ed622e59d27eb
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81752
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch renames the 16MB FMD file to remove the baseboard-specific
name 'Nissa'. This allows other supported baseboards to utilize the
16MB SPI flash. Additionally, the patch attempts to create a generic,
unified 32MB FMD file for both brya and nissa variants.
BUG=b:333314089
TEST=Build and boot Nivviks.
Change-Id: I9151a4bcbe9cc084cc19b1a3e91c0321fe4dcc37
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81676
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic7f6690786661e523292f7382df71ae4ad04d593
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Change-Id: I93e6989633b9ac1b2738b812e3f8b442ecfdcbf0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I265e427254ce9f735e65b0631c43f98bc778a34f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81812
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Change-Id: Ib1a8fc50217c84e835080c70269ff50fc001392c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81811
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The header file console/console.h is unused, just drop it.
TEST=abuild -t google/corsola -b wugtrio -a
TEST=abuild -t google/geralt -b ciri -a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: If3689afe532b63384b7905116c44c598e5fa13ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81685
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
|
|
Move the soc_get_ioapic_info for platforms with IIO IO-APICs to
a separate file from src/soc/intel/xeon_sp/acpi.c.
TEST=Build intel/archerticy CRB
Change-Id: I59022b7685539491604724ef3b550da1cfd53f13
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Iccdb4770890751b7f9d1b35248fe57993342fd50
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Ic71516ae73d61c9f13876a5acc071645bbe8e866
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81594
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To fix the build error below when include i2c_common.h, we should
include the necessary header for check_member.
"""
src/soc/mediatek/common/include/soc/i2c_common.h:24:42: error: expected ')' before numeric constant
24 | check_member(mt_i2c_dma_regs, dma_tx_len, 0x24);
| ^~~~~
| )
"""
TEST=abuild -t google/geralt -b ciri -a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I266571686e452e2b7514afee42ff0a48f8891831
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81684
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fine tune the panel clock to prevent mipi noise from affecting wifi
band. After tuning, the panel refresh rate keeps at 60Hz and wifi test
passed. Just keep consistent with the Linux kernel panel driver
panel-boe-tv101wum-nl6 [1] configuration.
[1] https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/5029075/59
BUG=b:330807136
TEST=fw screen display normally
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Ic44c86f062d4e836f403ee97f2fc6370fff02797
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Correct verbtable value for pin widget 20 of Realtek ALC256 based on the
updated verbtable received from Realtek. Updated Version : 5.0.3.1. This
fixes the headset detection failure, when power_save is enabled in
legacy hda driver.
BUG=b:330433089
BRANCH=None
TEST=Verified headset on Brox
When connected to audiojack in power_save state of legacy hda driver,
headset is detected and audio is resumed.
Change-Id: I71b7d59b3ab5310a0b6cdb31fb5033f94263d151
Signed-off-by: Poornima Tom <poornima.tom@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81654
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Terry Cheong <htcheong@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Change-Id: I878c14058e1edc0f64e37c2fc16b8dcf75b90192
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81631
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Starting with version 18 LLVM puts code and data generated with
-ffunction-section -mcmodel=large inside sections with an 'l' prefix.
Change-Id: Ib755673dfa9e71172bbef0a5aec075154c89a97b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81675
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A register dump between native and MRC.bin raminit showed a difference
in the PM_DLL_CONFIG register. Use the same value as MRC.bin uses.
Tested on Lenovo X220: Still boots and works fine.
Change-Id: Iaf6334814c5748e5a3691a572213f433c79f382d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79759
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When DEBUG_SMI is selected, common code may use these helpers to handle
addressing and initialising the SoC-specific UART. Therefore, add uart.c
to be compiled into SMM.
Change-Id: If7c6f2346d5f9ffb371d51d1de6f0b695acedf10
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81072
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Replace fixed-width integers for pointers and sizes with uintptr_t and
size_t, promoting portability across 32-bit and 64-bit architectures.
For FSP-API specific UPD assignments, rely on `efi_uintn_t` rather
fixed size datatype uint32_t/uint64_t.
BUG=b:242829490
TEST=Firmware splash screen visible on google/rex0 w/ both 32-bit and
64-bit compilation.
Change-Id: Iab5c612e0640441a2a10e77949416de2afdb8985
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81615
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
This refactoring ensures bmp_load_logo() takes logo_size as an
argument, returning a valid logo_ptr only if logo_size is non-zero.
This prevents potential errors from mismatched size assumption.
BUG=b:242829490
TEST=google/rex0 builds successfully.
Change-Id: I14bc54670a67980ec93bc366b274832d1f959e50
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81618
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
unlock_pam_regions() is needed for SKX and CPX. Put the codes into
chip_gen1.c so that it could be shared among SoC generations.
After shared, unlock_pam_regions() is still called from SKX and
CPX SoC specific codes. SPR will also use chip_gen1.c, but it will
not call unlock_pam_regions().
TEST=Build and boot on intel/archercity CRB
Change-Id: Idbc7dc6dd22a1747a65543666fc714a0872e6b37
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This removes the runtime SMI call to set up the communication buffer
for SMMSTORE in favor of setting this buffer up during the installation
of the smihandler.
The reason is that it's less code in the handler and a time costly SMI
is also avoided in ramstage.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I94dce77711f37f87033530f5ae48cb850a39341b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Fast SPI code assumes only one SPI flash is present. The SPI flash
driver for older southbridges is able to detect multichip. See the
spi_is_multichip() in src/southbridge/intel/common/spi.c.
Some boards (e.g. Lenovo ThinkCentre M920 Tiny) still come with two
chips populated instead of one. With this change, both chips are probed,
and the correct total size is calculated. Otherwise, only the first one
was probed, which resulted in an error such as:
SF size 0x1000000 does not correspond to CONFIG_ROM_SIZE 0x1800000!!
Change-Id: I8d7449f9e1470dc234fe5ba5217d3ce4c142b49c
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
<types.h> is supposed to provide <stdint.h>.
Change-Id: Ia68a0dc8fba4a48401e213ebb8356e32f0a019ab
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
commit b7832de026 (x86: Add .data section support for pre-memory stages)
added a data section to the bootblock. This needs to be accounted for in
the linker script.
Change-Id: I39abe499e5e9edbdacb1697c0a0fc347af3ef9c4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81434
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:332488817
TEST=set and unset bit20 in HW_CONFIG and check if VPU(0b.0)
is enabled when bit20 is set, and disabled when cleared
Change-Id: I6d7b35dbf8ac9b0abb42f64a947b4bb94f3c6b0f
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Daniel Kang <daniel.h.kang@intel.com>
|
|
Change-Id: I42bb15b8534d16401cd06ff803a8425221c5f3c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Call into FSP-T using the protected mode wrapper
and enter long mode in FSP-T support assembly code.
TEST: Booted on ibm/sbp1 in long mode.
Change-Id: Id6b9780b06b4bfbb952e32091ffbf3d0014f2090
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Based on schematic and gpio table of sundance, generate overridetree.cb
settings for sundance.
BUG=b:328505938
TEST=FW_NAME=sundance emerge-nissa coreboot chromeos-bootimage
Change-Id: I857be7bc7f98281cac57fef85bf9f3cef2ec14e9
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
I2C slave addresses 0x41.
BUG=b:332458912
BRANCH=None
TEST=emerge-nissa coreboot & working correctly in DUT
Change-Id: I2d26bfd4f415aa128b6256f83bc58987b15a557a
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81610
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I18bf67cae7af90a92a030e552af6dc6b134a8357
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
intel/common/block/acpi provides default soc_get_ioapic_info for
single IOAPIC model. Use the default soc_get_ioapic_info when
XEON_SP_HAVE_IIO_IOAPIC is not set. This model fits for SPR and
later.
TEST=Build and boot on intel/archercity CRB
Change-Id: I1ecfba49cd9b4dfbb3f11d58d04d07ea1752a131
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Include `fsp_header.h` from vendorcode for dynamic FSP_INFO_HEADER
selection.
BUG=b:242829490
TEST=google/rex0 builds successfully with 64-bit FSP.
Change-Id: If165e0517752f320d898cf82f298aa9f5699ae86
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81624
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change refactors EDK2 essential header management within the FSP
directory to ensure compatibility.
Header selection is now dynamically based on:
* FSP specification version: Distinguishes between 1.1 and 2.x
* EDK2 revision (for FSP 2.x): Chooses the appropriate FSP info header
FSP Header
|
|-> FSP 1.1 specification FSP_INFO_HEADER
|-> FSP 2.0 specification EDK2 release
|-> EDK2_2017 FSP_INFO_HEADER
|-> EDK2_2020 FSP_INFO_HEADER
|-> EDK2_2021 FSP_INFO_HEADER
|-> EDK2_2023 FSP_INFO_HEADER
Any .C/.H file requires to include FSP_INFO_HEADER can now just add the
FSP header alone.
BUG=b:242829490
TEST=Able to build google/rex0 with 64-bit FSP.
Change-Id: I29e5002821843c9cffbc8f6317d1062175f014ff
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81623
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces the FSP_SIG macro into EDK2 headers to ensure
compilation compatibility when using FSP 2.x specifications.
Previously, the macro was only defined for FSP 1.1.
BUG=b:242829490
TEST=Successful build of google/rex0 with 64-bit FSP.
Change-Id: I4f97fc303ca2881ccd17b4d149d01c3b671dbbde
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Ensures the FSP debug handler adheres to the EFI calling convention,
enabling seamless integration with coreboot infrastructure.
This is critical for 64-bit coreboot and FSP communications.
BUG=b:242829490
TEST=FSP debug logs successfully captured via coreboot event handler.
Change-Id: I9085a6c7d50e58fb56cbbc61da3a0af094d0dc05
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
This patch defines __efiapi (based on EFIAPI) for coreboot-compliant
EFI calls. This lays the groundwork for future 64-bit EFI calling
convention support within coreboot/FSP.
BUG=b:242829490
TEST=FSP debug log accessible via coreboot event handler.
Change-Id: I21660f8ebeed3b9ef060118928a940a470492bb8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81620
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When battery level is below critical level or battery is not present,
cpus need to run with a power optimized configuration to avoid platform
instabilities such as system power down.
This will check the current battery status and configure cpu power
limits using current PD power value.
BUG=b:328729536
BRANCH=brya
TEST=built and verified MSR PL2/PL4 values.
Intel doc #614179 introduces how to check current PL values.
[Original MSR PL1/PL2/PL4 register values for xol]
cd /sys/class/powercap/intel-rapl/intel-rapl\:0/
grep . *power_limit*
constraint_0_power_limit_uw:15000000 <= MSR PL1 (15W)
constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W)
constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W)
[When connected 60W adapter without battery]
Before:
constraint_0_power_limit_uw:15000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:114000000
After:
constraint_0_power_limit_uw:15000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:60000000
[When connected 45W adapter without battery]
Before:
constraint_0_power_limit_uw:15000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:114000000
After:
constraint_0_power_limit_uw:15000000
constraint_1_power_limit_uw:45000000
constraint_2_power_limit_uw:45000000
Change-Id: I5d71e9edde0ecbd7aaf316cd754a6ebcff9da77d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81614
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
In order to avoid the noise caused by the codec output to the audio
jack during the shutdown and poweron process, we will use GPP_A11 for
the codec power supply gate, keep low during the startup process, and
wait for the driver to turn on. This change does not affect the beep
output of depthcharge.
BUG=None
TEST=There is no squeaking sound when turning on and off
Change-Id: I5982be5a8d965086b46861f4c2c758d9bdee6e75
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81629
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
It does not hurt to do this and makes it possible to link romstage
sources into bootblock.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic7edfdac43c2d71ee3dcbd9d8f59c9799595e7f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79576
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes a warning about casting an integer to a pointer, where the
integer has a different size than the pointer (UINT32).
Change-Id: Iceb7cb1dbdc6f5397823a1737e3baeac96966a78
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81559
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fine tune the panel clock to prevent mipi noise from affecting wifi
band. After tuning, the panel refresh rate keeps at 60Hz and wifi test
passed. Just keep consistent with the Linux kernel panel driver
panel-boe-tv101wum-nl6 configuration.
BUG=b:330807136
TEST=fw screen display normally
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I128b33fbcda9759330a363ebb6cf66415405c488
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81625
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Currently the SRAT table only exposes one proximity group as
it uses the LAPIC node_id, which is always initialized to 0.
Use CPUID leaf 0x1f or 0xb to gather the node ID and fill it
to make sure that at least one proximity group for every socket
is advertised.
For now the SNC config isn't taken into account.
Change-Id: Ia3ed1e5923aa18ca7619b32cde491fdb4da0fa0d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add a new Staryu follower device 'Wugtrio'. And also enables SD card
support and MIPI panel support.
BUG=b:331870701
TEST=emerge-staryu coreboot chromeos-bootimage
BRANCH=corsola
Change-Id: I586de68da4d0ee2dd5b7baea92ebb06db9fcfe8b
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81585
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move starmie mipi panel selection from BOARD_GOOGLE_STARYU_COMMON
section to BOARD_SPECIFIC_OPTIONS section.
BUG=None
TEST=emerge-staryu coreboot chromeos-bootimage
BRANCH=corsola
Change-Id: Ib5792542f55a78c0840b6169b5ecf092e7cefe98
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81602
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch replaces UINT8 with uint8_t to align with coreboot's
standard data type conventions.
This promotes consistency within the codebase.
BUG=b:242829490
TEST=Verified firmware splash screen functionality on google/rex0.
Change-Id: I524bf6dc83e4330f155e21691f6b161643f29bd8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81571
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Enable SMLINK1 interface for PMC-PD communication to configure Type-C
muxes.
Refer RPL EDS vol 1: 765585.
BUG=b:327622474
BRANCH=None
TEST=Boot image on SKU2 and check PMC-PD working.
Change-Id: Ia678d291e7a14aefe09026e70478fea3f68c8e10
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81207
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Deepti Deshatty <deepti.deshatty@intel.com>
|
|
Make get_soc_power_limit_config() a public function to use on brya
variants. Add prefix 'variant_' for it.
BUG=None
BRANCH=brya
TEST=emerge-brya coreboot
Change-Id: I31f938938e7c9da49c2aa7b52dd4b5f46f793495
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81616
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add sundance supported memory parts in mem_parts_used.txt, generate
SPD id for this part.
1. Samsung K3KL6L60GM-MGCT, K3KL8L80CM-MGCT
2. Hynix H58G56AK6BX069, H9JCNNNBK3MLYR-N6EE
BUG=b:332201349
TEST=Use part_id_gen to generate related settings
Change-Id: Ieece88b0b2b2ea5f0d6192ee8441e50d3f22a972
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81612
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Deku has two Ethernet ports. Currently both get assigned the wrong
MAC address due to the LAN devices indices being swapped and
vpd ethernet_mac0() affects device eth1 and vpd ethernet_mac1() affects
device eth0.
Correct the device indices for LAN devices so ethernet_mac[0-1] in vpd
can apply to the correct ethernet ports.
BUG=b:320203629
BRANCH=firmware-rex-15709.B
TEST=vpd -s ethernet_mac0=<mac address0>
vpd -s ethernet_mac1=<mac address1>
reboot the system and check ifconfig
eth0 and eth1 MAC addresses are fetched correctly
Change-Id: Id1508104cbb5cf0a234f34f9db19cc535fdb634b
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81564
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
When touch controller is configured as THC-SPI mode, DID is 0x7e49 for
THC0, and 0x7e4b for THC1.
0x7e48 and 0x7ea4 are the DIDs when ThcMode is 0 (default) for THC0
and THC1 respectively.
Refer MTL EDS vol 1: 640228.
BUG=b:307775082
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I1b98fdbd8d8588492bcafa0f3998818dc83ff1d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81330
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyoung Il Kim <kyoung.il.kim@intel.com>
|
|
Add K&D panel KD_KD101NE3_40TI serializable data to CBFS.
Datasheet: KD101NE3-40TI-A003 _Pre SPEC_20231218.pdf
BUG=b:331870701
TEST=build and check the CBFS include the panel
BRANCH=None
Change-Id: Ibed67d2f3321fef332ab1e80f06225e27d205f71
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81583
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GDB debugging is not implemented with x86 long mode.
Change-Id: Icaf7d0763829d5badf73d38bb8fc3d36cfe18964
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81379
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
unlock_pam_regions routes Programmable Attribute Map (PAM) access
to DRAM. In SPR, PAM routing to DRAM is covered by FSP. Move the
step to SoC specific codes.
TEST=intel/archercity CRB
Change-Id: I3fd1d806807449e6a4d9d4d2c8a47ce61ed53018
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Add dynamic PCI domain _OSC ASL generation codes, supporting both
PCIe and CXL domains.
Dynamic SSDT generation is used to generate a list of ASL device
objects based on FSP outputs (e.g. the SoC/SKU configurations)
and _OSC is a method inside these objects (hence it would be
straightforward to be generated altogether, plus some C codes
managed boot configs could be referenced as well).
This usage is optional. It is helpful for cases where the same
code set supports multiple SKUs/SoCs (difficult to be handled by
one set of static SSDT), and the CPU performance is good enough
to run SSDT generation logics with minimal costs.
TEST=intel/archercity CRB
Tested with https://review.coreboot.org/c/coreboot/+/81377.
Change-Id: I711ce5350d718e47feb2912555108801ad7f918d
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
IBL (Integrated Boot Logic) provides a subset of server
PCH logics for no-PCH solution. IBL is with limited features
and registers exposed, PCIe root ports/USB/SATA/LAN support are
removed.
Change-Id: I8f3d64a2dd3b79ec5a9e4306f40b012b00387259
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81314
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Granite Rapids (6th Gen Xeon-SP) FSP introduces UDS_STACK_RES/
UDS_SOCKET_RES and retires the usages of STACK_RES/
IIO_RESOURCE_INSTANCE. Make redinitions to make Xeon-SP common
codes to work for both 6th Gen before and later.
Change-Id: I28c948525cd6d7ac4b9c3fa67e3c99ec637ed38f
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81040
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The power_limits_config variable for ADL/RPL is array data, but we got
soc_power_limits_config variable without its index. So correct the
code to get the proper pointer of the data for current CPU SKU.
I tried to override the PL4 value to 80W from 114W with following
table in ramstage.c as a test for bug b/328729536.
```
const struct cpu_power_limits limits[] = {
{PCI_DID_INTEL_RPL_P_ID3, 15, 6000, 15000, 55000, 55000, 80000},
}
```
And then verified the msr_pl4 value on ChromeOS using Intel PTAT tool.
- Before this patch: msr_pl4 was not changed, it's always 114
- After this patch: msr_pl4 was changed to 80
BUG=None
BRANCH=None
TEST=Built and tested the function could adjust PL4 on xol in local.
Change-Id: I9f1ba25c2d673fda48babf773208c2f2d2386c53
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Update GPIO configuration according to the schematic changes. The
locations of speaker and DMIC are swapped.
- Speaker: I2S2 -> I2S1
- DMIC: GPP_S2/GPP_S3 -> GPP_R4/GPP_R5
BUG=b:318584606
TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage
Change-Id: I3468d79f33d9d9ef8377ccf0f8f628956b02d3c3
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81444
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
ISH Firmware name needs to be configured only when full sensing
capabilities are enabled through ISH_ENABLE FW_CONFIG. Similarly DMA
property needs to be added only when UFS is enabled through STORAGE_UFS
FW_CONFIG. Hence configure the ISH device at run-time based on
FW_CONFIG.
BUG=b:319164720
TEST=Build Brox BIOS image and boot to OS.
Change-Id: I678416acd48e03ab77ae299beae6e295a688b8df
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81418
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add Synaptics touchpad via HID-I2C interface in I2C5 bus for glassway.
BUG=b:331677400
BRANCH=firmware-nissa-15217.B
TEST=emerge-brya coreboot and check touchpad function work.
[INFO ] input: PNP0C50:00 06CB:CE9B Touchpad as /devices/pci0000:00/0000:00:19.1/i2c_designware.5/i2c-17/i2c-PNP0C50:00/0018:06CB:CE9B.0001/input/input4
[INFO ] hid-multitouch 0018:06CB:CE9B.0001: input,hidraw0: I2C HID v1.00 Device [PNP0C50:00 06CB:CE9B] on i2c-PNP0C50:00
Change-Id: Ifbb2cb750a80bc6e8f96609257dcd1e695ad1fa4
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Create the sundance variant of nissa reference board by copying the
template files to a new directory named for the variant.
Due to new_variant.py limitation that repo can no longer be used in
inside, created this CL manually following google suggestion.
BUG=b:328505938
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_SUNDANCE
Change-Id: Ia8ba318f18d2cac69898687311631778e61bf2ea
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81347
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1aacff869663e1db74cd485787d7103b9ec5602e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78448
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Use macros from the Linux kernel 6.5 to make the inline assembly also
compile on clang.
TEST: See that the generated code is identical on GCC and compiles on
clang.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I516033c69e62dfdb38f83285c156d5527917ad55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add a new Kingler follower device 'Kyogre'
BUG=b:318614302
TEST=emerge-corsola coreboot
Change-Id: Iae3857a9f8edadcc2eee3500fda2e76c0334221c
Signed-off-by: Kei Hiroyoshi <hiroyoshi.kei@fujitsu.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81218
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
The RPL FSP currently uses HECI commands to retrieve the chipset
initialization version because the MBP HOB creation is disabled
(SkipMbpHob=1). This has resulted in an approximate 150ms increase in
boot time. Investigations are ongoing to determine the cause of the
delay when using HECI commands. As an interim solution, this patch sets
SkipMbpHob=0, enabling the use of MBP HOB or acquiring the chipset
initialization version, which is expected to reduce the boot time.
BUG=b:328430167
TEST= Able to build,boot and collect boot time data of brya.
With this patch:
963:returning from FspMultiPhaseSiInit 1,337,481 (249,046)
Without this patch:
963:returning from FspMultiPhaseSiInit 1,496,268 (408,194)
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Change-Id: I8a99a57b644732074e41051d99e63576f1edd229
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
GNR N-1 FSP headers are a set of stub headers used to fulfill
build sanity check for GNR SoC and CRB codes before the formal
FSP headers are published. The N-1 headers are forward compatible
with the later formal headers.
Change-Id: I1c8125dd64e5a9619073c2f17aeade1d33607870
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
GraniteRapids (6th Gen Xeon-SP) FSP contains changes in IIO stack
descriptors impacting the way of coreboot's creation of domains.
Separates the codes as preparation for 6th Gen and later platforms.
Change-Id: Iab6acaa5e5c090c8d821bd7c2d3e0e0ad7486bdc
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81312
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add Kconfig option for full-speed setting. Some variants do not support
the full-speed at limit configuration (IT8772F). Keep it enabled for all
current variants that use the common EC code as it was previously
enabled unconditionally - datasheets weren't revisited individually.
Change-Id: Icf24ea1c4f41771a18803957456f0aeba0e51b13
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81525
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix warning for disabled thermal inputs.
Fix warning for PECI thermal inputs if one was set up previously.
Depending on the mb, the superio will not go through power-on reset and
retain its registers. Do not trigger a warning if the current register
value aligns with the desired value. Don't return early if some input is
already configured for PECI, simply overwrite the configuration.
Both warnings were observed while porting the "HP Pro 3500 Series" mb.
Change-Id: Ibabe1b1ef55f2acb2074eceb535ec684bffc8155
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Fix regression introduced in 47e9e8cde1810ee9f249027b14ee9f82a7a52d84
"security/tpm: replace CONFIG(TPMx) checks with runtime check":
Replace BIOS_WARN with BIOS_WARNING.
Change-Id: Id23cda2f5403effd2a4bda3852f0f300d0e62cdf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81590
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I79b93b0ca446411e2a1feb65d00045e3be85ee8a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I57686e68b4b1bdb28a15b69e55b71c98b0b53a1f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I0d2ff9828e83ef927036c561d11f95b54b858cda
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I335487ca1b17ab958c0d0238f425b92b430014ca
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I51dd9eb5a2fef5800670f981275139e932af2be0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81493
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If68303cd59b287c8a5c982063b2ab75fd74898d6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: Id604dc981d6ca0a8163b7477b7916210faa56a77
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I7071cbcc26e2080020e83b894cf4ac4ef46913c3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I2dae34441909f6135b95e7b017659ce4f4666b4e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: If2c2138ed3dc437b924297330805caa8c357853d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81460
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I140daa5b862ffd3a5b5468d7cb9dbdd81426855e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81459
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0203e77dd23fa026cd252abbda50f1e9f6892721
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I9ba061fe0b1396ccc1597e26685a6b4e312e3549
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I1bb4a052a4e74850660944b687c21e817eb437b2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
With SMM holding page tables itself, we can consider SMM support stable
and safe enough for general use.
Also update the respective documentation.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ifcf0a1a5097a2d7c064bb709ec0b09ebee13a47d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
When switching back and forth between 32 to 64 bit mode, for example to
call a 32-bits FSP or to call the payload, new page tables in the
respective stage will be linked.
The advantages of this approach are:
- No need to determine a good place for page tables in CBFS that does
not overlap.
- Works with non memory mapped flash (however all coreboot targets
currently do support this)
- If later stages can use their own page tables which fits better with
the vboot RO/RW flow
A disadvantage is that it increases the stage size. This could be
improved upon by using 1G pages and generating the pages at runtime.
Note: qemu cannot have the page tables in the RO boot medium and needs
to relocate them at runtime. This is why keeping the existing code with
page tables in CBFS is done for now.
TEST: Booted to payload on google/vilbox and qemu/q35
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ied54b66b930187cba5fbc578a81ed5859a616562
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80337
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When linking in page tables more place is needed. Size the bootblock is
top aligned, this has no impact the final size for existing setups.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I23f176d63d3c303b13331a77ad5ac6c7a19073d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This does the following:
- Top align the bootblock so that the only the memory needed gets used.
This might slightly reduce the time the PSP needs to decompress the
bootblock in memory
- Use a memory directive to assert that the 16bit code is inside the top
64K segment
- Use the program counter less. While the BDF linker is happy about
running the program counter backwards, LLD is not. There is no
downside to this.
- Use a symbol rather that the program counter for sections. LLD gets
confused when (.) is used along with '<': it places the section at the
start of the memory region, rather than at the program counter. Using
a variable name works around this.
- Use a 'last_byte' section to make sure the first instruction is at
0xfff0. Both the BDF and the LLD linkers seems to work well with this
code
TEST: Both BFD and LLD are able to link the bootblock
Change-Id: I18bdf262f9c358aa01795b11efcb863686edc79c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Most of the original secdata_tpm.c was TPM2-specific implementation.
Just moving the code around, with trivial tweaks:
- drop now unnecessary #ifdef directives from _factory_initialize_tpm()
- drop leading underscore from _factory_initialize_tpm{1,2}() (external
identifiers should not start with an underscore in C)
- drop unused <security/vboot/tpm_common.h> include and sub-includes of
tss.h which should be considered its part (so this isn't an indirect
inclusion)
- fixed formatting of RETURN_ON_FAILURE() which didn't have slashes
aligned no matter what tab width was used
Change-Id: I0090b748d7d3b2d76a941b87b5885682fd81c4fc
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81415
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This prepares the code for enabling both CONFIG_TPM1 and CONFIG_TPM2
during compilation, in which case actual TPM family in use can be
determined at runtime.
In some places both compile-time and runtime checks are necessary.
Yet in places like probe functions runtime state checks don't make sense
as runtime state is defined by results of probing.
Change-Id: Id9cc25aad8d1d7bfad12b7a92059b1b3641bbfa9
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69161
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No functional changes. Refactor code such that there won't be any
compiler or linker errors if TSS 1.2 and TSS 2.0 were both compiled
in.
One might want to support both TPM families for example if TPM is
pluggable, while currently one has to reflash firmware along with
switching TPM device.
Change-Id: Ia0ea5a917c46ada9fc3274f17240e12bca98db6a
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Via an out parameter. This is needed to be able to dynamically pick TSS
implementation based on the information discovered on probing.
Change-Id: I5006e0cdfef76ff79ce9e1cf280fcd5515ae01b0
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69159
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0ce2b61329efede1ba8a02446610e3eb635ceedc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81462
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
For dram_type 21 the switch case in use_ddr4_params function falls to
default. This adds SPD_DRAM_LPDDR5X dram_type case to switch case block
for dram_type 21 in the function.
With this patch below NOTE will not be observed in the log:
[NOTE ] Defaulting to using DDR4 params. Please add dram_type check for 21 to use_ddr4_params
BUG=None
BRANCH=None
TEST=Boot brox SKU1/SKU2 and verify logs for default case
Change-Id: Id78ef90c0dc2e869c1f0424674b982ba64ba3939
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Testing on the unmatched shows the code no longer works completely
correctly; Linux has taken over the handling of misalignment
anyway, because handling it in firmware, with the growing
complexity of the ISA and the awkward way in which it
has to be handled, is more trouble than its worth.
Plus, we don't WANT misalignment handled, magically, in
firmware: the cost of getting it wrong is high (as I've
spent a month learning); the performance is terrible (350x
slowdown; and most toolchains now know to avoid unaligned
load/store on RISC-V anyway.
But, mostly, if alignment problems exist, *we need to know*,
and if they're handled invisibly in firmware, we don't.
The problem with invisible handling was shown a while back
in the Go toolchain: runtime had a small error, such that
many misaligned load/store were happening, and it was
not discovered for some time. Had a trap been directed
to kernel or user on misalignment, the problem would
have been known immediately, not after many months.
(The error, btw, was masking the address with 3,
not 7, to detect misalignment; an easy mistake!).
But, the coreboot code does not work any more any way,
and it's not worth fixing. Remove it.
Tested by booting Linux to runlevel 1; before,
it would hang on an alignment fault, as the
alignment code was failing (somewhere).
This takes the coreboot SBI code much closer to
revival.
Change-Id: I84a8d433ed2f50745686a8c109d101e8718f2a46
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81416
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, simply changing the wake event configuration to ANY does
not completely resolve the issue of inserting a pen not waking the
system. The pen actually needs to wake up the system both when plugged
in and when pulled out. This is because in the pen's GPP_F15
configuration, the original attribute is EDGE_SINGLE, which should be
changed to EDGE_BOTH.
BUG=b:328351027
TEST=insert and remove pen can wakes system up.
Change-Id: I1823afd0bcb86804227117d2d5def38788bc7387
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81441
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Create the yavista variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:321583226
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_YAVISTA.
Change-Id: I6fa464a4dcd9551a42e8746e64c724b3582dbe02
Signed-off-by: Hsueh Rasheed <hsueh.rasheed@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80342
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Fix compilation errors when compiled for x86_64.
Test: Booted on ibm/sbp1 to linux payload.
Change-Id: I2c5ed0339a9c2e9b088b16dbb4c19df98e796d65
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81280
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
