| Age | Commit message (Collapse) | Author |
|---|
|
Use die_no_apcb to cause a build error when the APCB or SPD sources are
not found.
TEST=builds with and without matching APCB and SPD sources
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I62dce2c71061bfc5c01e0344b7dc115a47669140
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This sets the location of the skyrim MP2 firmware within the mainboard's
blobs directory, and adds the Kconfig option to the mainboard directory
so that it can be enabled in a saved .config file.
The skyrim MP2 firmware is skyrim specific, so it should not be placed
in the main PSP AMD_BLOBS directory.
We will also only want to enable the MP2 firmware for chromeos builds as
it's not useful for non-chromeos builds.
BUG=b:259554520
TEST=Build MP2 firmware into image, see that it gets loaded
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I04be6f2d0b605d4eca37fd927a70310259dc106c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Instead of using the PSTATE SSDT generated by binaryPI, use the common
AMD code by selecting SOC_AMD_COMMON_BLOCK_ACPI_CPU_POWER_STATE. To
match the SSDT from binaryPI, set ACPI_SSDT_PSD_INDEPENDENT to n. There
are two differences to the binaryPI SSDT: Now coreboot includes the C1
state in the _CST package instead of just having the kernel add this due
to the ACPI_FADT_C1_SUPPORTED bit being set and the address of the
PS_STS_REG P state status MSR is written to the corresponding field of
the _PCT package instead of being 0.
TEST=On Careena the new P and C state ACPI packages are nearly identical
to the ones from the SSDT from binaryPI with the two functional
differences mentioned above.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icdf6bc8f0e0363f185a294ab84edcb51322e7eb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Both the algorithm and the registers involved are described in the
public version of BKDG #55072 Rev 3.09 in chapter 2.5.2.1.7.3.2 _PSS
(Performance Supported States).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9b2c177d9d80c5c205340f3f428186d6b8eb7e98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The help text for VGA_BIOS_SECOND_ID was outdated and from a time before
we found out that just looking at the CPUID doesn't reliably tell us on
which type of silicon we're running and which VBIOS file to pick, so we
had to use a different method. Update the help text to match what the
code does.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia568771ed7dfa0c7bb850b0efcd2959d7ddfd4a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73335
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
On the Zen-based CPUs, the transition and bus master latency are always
written as 0, but on but on Stoneyridge hardware-dependent values are
used. Introduce get_pstate_latency that returns 0 for all non-CAR AMD
CPUs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I81086fa64909c7350b3b171ea6ea9b46f1708f67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Introduce get_pstate_0_reg and use it in tsc_freq_mhz to get the P state
register number corresponding to P state 0.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b92a858bf36b04a570d99c656e5ccfc84457724
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
On the Zen-based CPUs, P state 0 corresponds to the first P state MSR,
but on Stoneyridge this isn't the case. Introduce get_pstate_0_reg that
returns 0 for all non-CAR AMD CPUs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icc11e5b6099d37edb934e66fe329d8013d25f68d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Factor out the MSR access into a function with a more descriptive name.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I331c3205390edcbd8749b2d52b7cc7ac3a8ced5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The C state ACPI packages binaryPI generates and passes to coreboot in
the PSTATE SSDT only include the C2 state, but the kernel will add the
C1 state to its usable C states in this case. The native C state code
will generate both the C1 and C2 state packages to be more complete and
also to be more in line with the other AMD SoCs.
The code added in this commit isn't used yet, but will be used as soon
as Stoneyridge will be using the common AMD generate_cpu_entries by
selecting SOC_AMD_COMMON_BLOCK_ACPI_CPU_POWER_STATE once all needed
helper functions are implemented for Stoneyridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I06f90306ac196704e0102d0da6eab03f51513c29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H option is valid for all SoCs
with Zen-based CPU cores including the family 1Ah, so remove the suffix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I58d29e69a44b7b97fa5cfeb0e461531b926f7480
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move the static mhz variable inside the only function that is accessing
it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ief98c0a1c35fe1bbc4ff38dd175f12e0b3ddc515
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use get_pstate_core_freq instead of open-coding the calculations in
tsc_freq_mhz. In the case of the CPU frequency divider being 0,
get_pstate_core_freq will return 0; in this case that shouldn't happen,
TSC_DEFAULT_FREQ_MHZ will be used as frequency, since for the TSC
frequency it's better to err on the end of the expected frequency being
too high which will cause longer than expected delays instead of too
short delays.
Now that the code is using get_pstate_core_freq, this code is valid for
Glinda too, so also remove the comment on the
SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H option being selected in the Glinda
Kconfig. This Kconfig option will be renamed in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I01168834d4018c92f44782eda0c65b1aa392030d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use get_pstate_core_freq instead of open-coding the calculations in
tsc_freq_mhz.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If5d526e6b365c62a6669241f4fcdd25eca3f15fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This function will be used in follow-up patches for both the TSC rate
calculation and the still to be implemented P state ACPI table
generation in coreboot. The was checked against BKDG 52740 Rev 3.05,
BKDG #55072 Rev 3.04, and BKDG #50742 Rev 3.08.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9afaa044da994d330c3e546b774eb1f82e4f30e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Factor out the get_pstate_core_freq function from the SoC's acpi.c files
to both avoid duplication and to also be able to use the same function
in the TSC frequency calculation in a follow-up patch. The family 17h
and 19h SoCs use the same frequency encoding in the P state MSRs while
the family 1Ah SoCs use a different encoding. The family 15h and 16h
SoCs use another encoding, but since this isn't implemented in
Stoneyridge's acpi.c, this will be added in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8619822c2c61e06ae5db86896d5323c9b105b25b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Due to a non-constant TSC rate before the microcode update is applied,
the Performance Time Stamp Counter is used instead. To clarify this, add
a comment to the timestamp_get implementation. See commit 24079323d4d8
("soc/amd/stoneyridge: provide alternate monotonic timer") and the
description of the TscInvariant bit in CPUID Fn8000_0007_EDX Advanced
Power Management Information in the public version of BKDG #55072 Rev
3.09 for more details.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I824b372c36fa6f3eb912469b235a9474f6a58ff5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
set pwr_on_varybl_to_blon to 0x1c, which means fw will delay 112ms
between backlight on and vary backlight.
BUG=b:271704149
BRANCH=none
TEST=Build; Verify the UPD was passed to system integrated table;
measure the power on sequence on whiterun
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ib966d2ebd4ef4a8085695901ec5da160f467e32e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add UPD parameter for eDP power sequence adjust.
The pwr_on_vary_bl_to_blon is set one unit per 4ms.
BUG=b:271704149
TEST=Build; Verify the UPD was pass to system integrated table;
measure the power on sequence on whiterun
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I25c9f962e70f599c780259f0943a03f8aa7cbfd1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Update UPD structure to align with MDN-FSP.
BUG=b:271704149
BRANCH=none
TEST=Build/Boot to Chrome OS
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ie4021cebb57e3ec22191486aafd9099eec0fbd99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Add socket type for Meteor Lake as PROCESSOR_UPGRADE_OTHER.
BUG=None
TEST=processor upgrade is equal to "Other" for "dmidecode -t 4"
Signed-off-by: Jay Patel <jay2.patel@intel.com>
Change-Id: If891990436a0679697e292b460eaec63c09e7bf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add GOOGLE_SMBIOS_MAINBOARD_VERSION flag for rex board.
BUG=None
TEST=Verfied board ID for rex using "crossystem" command, giving the
output as 1.
Without CL:
localhost ~ # crossystem
arch = x86 # [RO/str] Platform architecture
backup_nvram_request = 1 # [RW/int] Backup the nvram somewh
battery_cutoff_request = 0 # [RW/int] Cut off battery and shu
block_devmode = 0 # [RW/int] Block all use of develo
board_id = (error) # [RO/int] Board hardware revision
clear_tpm_owner_done = 0 # [RW/int] Clear TPM owner done
With CL:
localhost ~ # crossystem
arch = x86 # [RO/str] Platform architecture
backup_nvram_request = 1 # [RW/int] Backup the nvram somewh
battery_cutoff_request = 0 # [RW/int] Cut off battery and shu
block_devmode = 0 # [RW/int] Block all use of develo
board_id = 1 # [RO/int] Board hardware revision
clear_tpm_owner_done = 0 # [RW/int] Clear TPM owner done
Signed-off-by: Jay Patel <jay2.patel@intel.com>
Change-Id: I644ed7a948f0094a0be080153d83eaa2e37b8f1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74037
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are two conditions within the config space dump code, one to
print offset, one at the end to put a newline. Tweak the printk
strings so the first conditioned printk does it all and move the
second printk out of the loop to the very end.
Change-Id: Ie9dc744406ba20412892df96720e88e24c3d52bc
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73887
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the mem_parts_used.txt, generate Makefile.inc and
dram_id.generated.txt for this part.
DRAM Part Name ID to assign
K3KL6L60GM-MGCT 5 (0101)
BUG=b:267249674
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I20a12a58d8a3d66a901a14569ca710acba3c05f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73920
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
From Meteor Lake onwards Intel FSP will generate the Trace Hub related
HOB if the Trace Hub is configured to save data in DRAM. This memory
region is used by Trace Hub to store the traces for debugging purpose.
This driver locates the HOB and marks the memory region reserved so
that OS does not use it.
Intel Trace Hub developer manual can be found via document #671536 on
Intel's website.
Change-Id: Ie5a348071b6c6a35e8be3efd1b2b658a991aed0e
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
The API finds the FSP resource HOB for the given GUID.
Returns the pointer to the HOB if found, otherwise NULL
Change-Id: I4ebc9b7d214e5fc731ae45f28e7f5732a7635cbc
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch adds a check for zero based SRAM base address. It will
help to avoid running into problems if the SRAM is disabled and
the base address register is zero.
TEST=Able to build and boot google/marasov with PCH SRAM being
disabled.
Change-Id: Iebc9dc0d0851d5f83115f966bf3c7aad1eb6bc01
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update header files for FSP for Meteor Lake platform to version 3084_85, previous version being 3064_81.
FirmwareVersionInfo.h:
1. Define INTEL_FVI_SMBIOS_TYPE macro
FSPM:
1. Remove deprecated UPD `BclkSource`
2. Address offset changes
FSPS:
1. Add `CnviWifiCore` UPD
2. Address offset changes
BUG=b:274051289
TEST=Able to build and boot google/rex to ChromeOS.
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Change-Id: I24dea1a31dbb592f9dea4246a3d490e5d23dca9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure GPIOs according to schematics.
BUG=b:273791621
TEST=emerge-nissa coreboot
Change-Id: I5a522b59468667d20674d55597cc06975bc12ab5
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2021a106e0d3a603b1a05296411700ffea32fc8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move map_oprom_vendev to graphics.c to match the other AMD SoCs. Also
change the comment style to be more in line with the rest of coreboot
and drop the unneeded line break in the printk call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icc1f3d73fba973413c5a22e2f5ae01bc58bc3e76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Fix the VGA_BIOS_ID IDs to match the PCI IDs in the VBIOS binaries and
the PCI ID Stoneyidge's map_oprom_vendev returns. This fixes the problem
that the display wasn't initialized due to not finding the VBIOS file in
CBFS. This bug in the Stoneyridge Kconfig was unmasked by commit
42f0396a1028 ("device/pci_rom: rework PCI ID remapping in
pci_rom_probe").
TEST=Display in Careena lights up again.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d1e6a3a65d7d7b07f49df9ce90620b79d9a2d78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74019
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Change to use simple device function for setting PMAX_LOCK because
the Sapphire Rapids PCU device is not scanned during coreboot PCIe
bus scan and would see "PCI: dev is NULL!" failure.
Change-Id: I3156a6adf874b324b5f4ff5857c40002220e47ab
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72400
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Stoneyridge uses the serial voltage ID 2 standard to tell the VRM on the
board which voltage it wants, so select the SOC_AMD_COMMON_BLOCK_SVI2
Kconfig option to have the corresponding code to decode the raw SVI2
value into a voltage.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7d7031d9ad997a86c18d0e9e7af9a88ddf2d873c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Set open-drain GPIOs for ChromeOS as input and bias-disable mode.
After applying this patch, the voltage of these pins will become the
expected value 1.8V (previously 1.0V), preventing wrong judgement of
low/high.
Reference document:
MT8188G_GPIO_Formal_Application_Spec_V0.3
BUG=b:274058085
TEST=build pass
Change-Id: I057716df6c59efb84fc395109db022b82ce528c4
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73963
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add UPD usb3_port_force_gen1 for skyrim
The default setting is set to disable
Skyrim -> set default as disable
BUG=b:273841155
BRANCH=skyrim
TEST=Build, verify the setting will be applied on skyrim.
Change-Id: Id53bed82a9fef93b574c3f30830555e02d7f4737
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb6087dc44e76ab63bc6b462c3328c23d83ae018
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74009
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A core voltage ID larger than 0xff shouldn't happen, since SVI2's core
VID is only 8 bit long. In order for making it more difficult to use
this function in a wrong way that results in a very wrong voltage being
returned, also return 0 for those invalid core VID values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I95417c45db86cd2373879cdad8a07fb9eb8dfdda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74000
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add UPD usb3_port_force_gen1 to support USB3 port force to gen1
BUG=b:273841155
BRANCH=skyrim
TEST=Build, verify USB3 port setting to gen1.
Change-Id: Iaa476f56cf10588d7de2203deca4122958c00783
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
To add fch_usb_3_port_force_gen1 parameter to force usb3 port to gen1
BUG=b:273841155
BRANCH=None
TEST=Build
Change-Id: I7560abb9a5fda6af3c2814f8b26c92925d8c17f4
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add UPD vrm_current_limit_mA, vrm_maximum_current_limit_mA, vrm_soc_current_limit_mA for DPTC.
Make sure UPD parameterare are set to be aligned.
BUG=b:245942343
BRANCH=none
TEST=confirm the UPD parameters has been set correspondingly with the FSP UPD.
Change-Id: Iacf0ce0d51d4c8698ec1ae7e810fd00574deeadb
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73875
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add the pstate_msr union of a bitfield struct and a raw uint64_t to
allow easier access of the bitfields of the P state MSRs which will be
used in future patches to generate the P state ACPI packages for the CPU
objects. BKDG #55072 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I944c8598ba95a0333124655c61ef9eba8a7595c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73998
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that all get_pstate_core_power implementations in each SoC's acpi.c
file is identical, factor it out into a common implementation. This
implementation will also work for Stoneyridge which isn't using the
common P state code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iba3833024a5e3ca5a47ffb1c1afdbfd884313c96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73997
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since SVI3 has the CPU voltage ID split into two parts, a serial voltage
ID version specific function is needed to get the raw core VID value.
This will allow making get_pstate_core_power common for all AMD CPUs in
a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71ca88c38b307558905a26cce8be1e8ffc5fbed4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73996
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of implementing the conversion from the raw serial voltage ID
value to the voltage in microvolts in every SoC, introduce the
SOC_AMD_COMMON_BLOCK_SVI[2,3] Kconfig options for the SoC to select the
correct version, implement get_uvolts_from_vid for both cases and only
include the selected implementation in the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I344641217e6e4654fd281d434b88e346e0482f57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73995
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add WIFI SAR table for omnigul.
BUG=b:273170023,b:273652516
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I2db057371754961503cfdc59f21c365fc82672c4
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73940
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change preprocessor #if to a regular if and let the compiler optimize
away the unused branch.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7af747812a448064ac6b38686b8bd616a755932e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Set orientation to LB_FB_ORIENTATION_BOTTOM_UP to align the volume
up/down direction with menu up/down in FW screen.
BUG=b:274749478
TEST=see FW screen in portrait mode.
TEST=volume key behaves as expected
Change-Id: If32859c4bf256c97147622ff04a17fc2ec80303d
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable SBU orientation handling by SoC for both USBC port2 and USBC
port3.
Constitution USBC port1 has retimer but USBC port2 and USBC port3 don't,
they do not flip the data lines, hence we need to set bits for USBC ports.
Change-Id: I4c5dfdba6c38c6e2f308b281ed316bb687ad8d8b
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Remove the sleepstates.asl as it was written for SOCs pre-Skylake
and not needed.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I46fe934c2a50b3d61575f66f0881ab6754fe8dc9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Birman requires 4-byte addressing for flash.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id732129cfc14bb47e8f3d7f3de479815e040ea16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add Kconfig option to force 4-byte addressing mode.
Some platforms require the flash to stay in 4-byte addressing mode where
it expects 4-byte addresses on regular commands.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2e41da2a78285c23c1c1d97eaf3969749812327b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Move EC FW from a CBFS file to an FMAP entry and rename the EC signature
section to EC_SIG.
An offset of (16M - 512K) was chosen to line up the EC FW before the
RW_MRC_CACHE.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9b19d92043790b10acd20fbfdf394d5bd67b8295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch moves USB Port Status and Control (PORTSC) Reg definition
into IA common code to allow other SoC code to reuse it without
redefining the same for each SoC.
TEST=Able to build and boot google/taeko where USB wake is working.
Change-Id: I6b540eab282403c7a6038916f5982aa26bd631f8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For some Xeon-SP (such as SPR-SP), more buses should be probed.
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: Ica3c61493a0ff6c699b500f30788b2cf5a06c250
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
Add support for Intel SPR-SP to uncore_acpi.c.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com>
Change-Id: I4c436a60743bee21b3b6e4060d7874a6cdc75ecf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Commit 65c456227e1 (mb/asrock/b75pro3-m: Add CMOS layout/defaults and
vbt.bin) introduced CMOS settings for selecting CPU_FAN{1,2}, but this
code was never implemented. Remove the fake setting for it.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ic2f4aa42f9cfd77defc2a11e16643690356bc26b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch drops the UFC sensor OV2740 (reused from the Brya chassis)
support for Rex and added support for Rex specific UFC sensor HI-556W.
BUG=b:269499723
TEST=Verified UFC is working on google/rex Proto 1.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6b8ac08adec351a103ac1764d974db4881dc4d6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70225
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The included acpi/acpigen.h provides the cppc_config struct and nothing
in this header file is using the cppc_config struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia91fd4105e6872d812f595447783d02a0dd1568b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73993
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the code was made common in commit 8f7f4bf87a23 ("soc/amd/cezanne,
common: factor out CPPC code to common AMD SoC code"), the include guard
wasn't renamed accordingly, so do that now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9eefe2065fae31e97aa4e6710008a6f9712bed40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73992
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Picasso and Cezanne use the serial voltage ID 2 standard to communicate
the CPU voltage to the voltage regulator module on the mainboard, while
Mendocino, Phoenix and Glinda use the serial voltage ID 3 standard for
this. Both standards encode the voltage in a different way, so add the
serial VID version number to the defines to clarify for which version
the define is.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8ddab8df27c86dc2c70a6dfb47908d9405d86240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73994
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Mendocino uses the SVI3 standard for CPU core voltage control which uses
9 data bits instead of the 8 in the SVI2 case and also calculates the
actual voltages with a different formula. The Mendocino code uses the
correct formula since commit 8d2bfbce23f6 ("soc/amd/sabrina/acpi:
Correct VID decoding on Sabrina"), but the MSR definition in the PPR
hasn't been updated to show the additional bit. The definition of the
register that is mirrored by these MSRs descries this 9th CPU voltage ID
bit though. Since this bit is expected to be zero, this shouldn't cause
a change in behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I05acd239300836a34e40cd3f31ea819b79766e2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73969
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Program some FSP settings as requested by Prodrive.
Change-Id: I04548e5eddc8a6be3a03b5dd9062470b4ef85adb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Atlas stores VPD (Vital Product Data) in an I2C EEPROM, which is only
connected to the EC. In order for the host (x86) to be able to access
the VPD, the EC reads the EEPROM contents into a buffer in EC RAM and
provides the host with read-only access to this EC RAM buffer through
EMI (Embedded Memory Interface) 0.
The VPD layout is designed to be extensible yet backwards compatible.
The code in coreboot uses the revision field to know which fields are
valid, and will populate the rest with fallback values.
Use the serial number and part number in VPD to populate SMBIOS tables.
Change-Id: I2d3d70fee22548daa73ef98af56c98e950dc5e9d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Implement initial support for EMI (Embedded Memory Interface), which
Microchip describes as "a standard run-time mechanism for the system
host to communicate with the Embedded Controller (EC) and other logical
components". EMI allows the host to access regions of EC memory without
requiring any assistance from the EC.
For now, Atlas only uses EMI 0. This change enables EMI 0, subsequent
commits will read data from it.
Change-Id: Ia899ae71e97f9fc259397dfb5fb84ca06545f5d8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
For SPR-SP, the SMM_FEATURE_CONTROL register is in UBOX_URACU_FUNC
instead of UBOX_DEV_PMON.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: Ide46c5f9cdf65b7e05552449b08ad4d7246664cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When encountering really incompatible memory configurations, post a
standard POST_RAM_FAILURE code when dying. Gone are the "HALT"
messages that no longer serve any good purpose, instead fatal messages
are edited to always end with "!" to make them stand out even with
loglevel prefix off.
Change-Id: Ie1b9e5a0415e4c64b1f4e935689263f62db012b2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The _LO part in the definition names is a leftover from before moving to
the pstate_msr union access to the bitfield elements where it still
mattered if a bit was in the lower of higher half of the MSR. With the
mask-and-shift access to the two parts of the MSR being gone, the _LO
part in the name isn't useful any more and possibly a bit misleading, so
drop that part.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib43c71e946388c944ecf40659d4c12ca02a27a5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73927
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since we already have and use the pstate_msr union in get_pstate_info,
also pass it directly to the get_pstate_core_freq and
get_pstate_core_power function calls avoids having to sort-of convert
the msr_t type parameter in the implementations of those two functions.
In amdblocks/cpu.h a forward declaration of the pstate_msr union is used
since soc/msr.h doesn't exist in the two pre-Zen SoCs that also include
amdblocks/cpu.h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I112030a15211587ccdc949807d1a1d552fe662b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73926
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SKU ID is not really used on Geralt. Both ADC channels 4 and 5 will
be used for LCM ID on derived projects. For Geralt reference board, only
PANEL_ID_LOW_CHANNEL is valid.
BRANCH=none
BUG=b:247415660
TEST=boot Geralt proto0 and see FW screen in DEV mode.
Change-Id: I77a3caadc1b0be5bf39dd2cf73ea1df88f9a09ea
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73874
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This reverts pieces of commit 08135332dd "soc/intel/xeon_sp: Report platform cpu info"
Reason for revert: Due to duplicated definitions this breaks the tree.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I7bcffe99e4f049e38d9a13c82d38464c64250ee1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74002
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use the pstate_msr union in get_pstate_info to check if the P state
enable bit is set. Also drop the now unused PSTATE_DEF_HI_ENABLE_SHIFT
and PSTATE_DEF_HI_ENABLE_MASK definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I79119e09af79a4bb680a18e93b4a61a049f0080e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add the pstate_msr union of a bitfield struct and a raw uint64_t to
allow easier access of the bitfields of the P state MSRs which will be
implemented in a following patch. PPR #57254 Rev 1.52 was used as a
reference. This patch adds and uses the cpu_vid_8 bit which is the 9th
bit of the voltage ID specified in the SVI3 spec. The way the CPU
frequency is encoded in the PSTATE MSR has changed compared to Phoenix,
so also update the comment in the SoC's Kconfig file that the selected
SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H is likely incompatible which will be
addressed in the future.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d1878ce4d9bc62ac597e6f71ef9630491628698
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Add the pstate_msr union of a bitfield struct and a raw uint64_t to
allow easier access of the bitfields of the P state MSRs and use this
bitfield struct in get_pstate_core_freq and get_pstate_core_power. The
signature of those two function will be changed in a follow-up commit.
PPR #57019 Rev 1.65 and PPR #57396 Rev 1.54 were used as a reference as
well as the reference code. This patch also adds and uses the cpu_vid_8
bit which is the 9th bit of the voltage ID specified in the SVI3 spec.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia024d32ae75cf2ffbc2a2e86a8b3af3dc6cbad61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Intel Client PCIe* controller expects each device should drive the
SRCCLKREQ#. If the GPIO is set to native mode for a device, which does
not support SRCCLKREQ#, then during RTD3 exit link would not be
established. Because controller samples the SRCCLKREQ# before
detecting the device and break L1 as the system might enter L1SS as
controller detects SRCCLKREQ# as de-asserted.
As a workaround the Pins must not be configured in Native Mode (CLKREQ
native function). Therefore here they are not configured at all.
source: 689882 (intel document ID)
So apparently hardware doesn't sample SRCCLKREQ Pin if it's not
configured as such.
That workaround suggestion however also brought a patch to FSP, which
in turn causes the same bug (even if SRCLKREQ are not configured).
Usually in order to make use of root port power saving features (e.g.
clock gating), the Root port must either be disabled or a CLKREQ Pin
must be configured. The patch however removed that check before
enabling power management for the rootport.
Workaround (until FSP is fixed):
pretend to FSP that the rootports have a CLKREQ Pin attached, by
supplying them in the FSP UPDs. That will cause FSP to configure the
CLKREQ Pin and enable power management for said rootport, but it will
not crash on L1 entry/exit. That has been done on the Atlas board
(as workaround) for a short period of time (before applying FSP Fix)
like this:
// RP 5 (the rootport you want to fix)
- memupd->FspmConfig.PcieClkSrcUsage[2] = 4;
// e.g. choose a clkreq pin that is not routed out
- memupd->FspmConfig.PcieClkSrcClkReq[2] = 0;
Furthermore disable CpuPcieRpClockReqMsgEnable FSP-M options to prevent
the same issue, but for CPU root ports. If not done the following will
happen in coreboot:
[DEBUG] PCI: 00:06.2 scanning...
[SPEW ] do_pci_scan_bridge for PCI: 00:06.2
[DEBUG] PCI: pci_scan_bus for bus 02
[DEBUG] PCI: 02:00.0 [1344/5410] enabled
[INFO ] PCIe: Common Clock Configuration already enabled
[INFO ] PCIE CLK PM is not supported by endpoint
[INFO ] ASPM: Enabled L1
[EMERG] CPU Index 9 - APIC 32 Unexpected Exception:18 @ 10:76aeb93f - Halting
[EMERG] Code: 0 eflags: 00000046 cr2: 00000000
[EMERG] eax: 00000000 ebx: 00000009 ecx: 00000000 edx: 00000000
[EMERG] edi: 00000009 esi: 76b218c4 ebp: 00000000 esp: 76b29100
[EMERG] 0x76aeb8f8: c4 2c 5b 5e 5f 5d c3 56
[EMERG] 0x76aeb900: 53 83 ec 14 65 a1 00 00
This patch is only a workaround for the issue and it will be reverted as
soon as FSP is fixed.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I324bc6ab158d4b3b5ae9d3bade21076b44bc8892
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add platform cpu info for known microcode, print cpuid & processor
branding string. This will print as in the following example:
CPU: Intel(R) Xeon(R) Platinum 8468H
CPU: ID 806f6, Sapphire Rapids E3, ucode: 2b000130
CPU: AES supported, TXT supported, VT supported
Change-Id: I9c08fb924aad81608f554523432ab6a549b1b75f
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
While doing the initial port of this board, hda_verb.c was mainly put
together by guesswork and borrowing the pinouts from similar boards.
While it was mostly correct, not everything was tested properly.
This change takes the values of vendor BIOS version P1.80, obtained by
running `cat /sys/class/sound/hwC0D0/init_pin_configs` while booted
from the vendor firmware.
7.1 channel audio and front panel audio are now also tested.
Change-Id: I60b0f55c203f42b220f13cf943912f7428476792
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73935
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Most of the code is taken from 2570p, adjusted with autoport, SuperIO
from 8470p and inteltool, GPIO config from inteltool via autoport.
The laptop works well under coreboot with SeaBIOS 1.16.1 payload,
running Debian GNU/Linux with kernel 6.1.15.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I854104516d5b6fbd78ee2989197000a7dbb85136
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73856
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As a follow-up to commit 1a591d0c4460 (mb/asrock/b75m-itx: Make NIC a
child device below PCIe port 4), this change corrects the subsystemid
being incorrectly applied to the Realtek NIC instead of the PCIe root
port.
Change-Id: Ib6fb8bf808132c008846d8ca9acde0eef277765c
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This board inherited cmos.default and cmos.layout from asrock/h77pro4-m,
which has two CPU fan headers and a CMOS option to select which one will
provide the tachometer source.
However, the code for this was never implemented. Moreover, this board
only has one CPU fan header, rendering the option useless. This change
removes the option from cmos.layout and cmos.default.
Change-Id: Ib4580e243781e2340af2cefb825f26ee896c2bd3
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73931
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
FSP may program a different ID under certain circumstances.
Read IOAPIC ID from hardware instead of using some define that
might not reflect how hardware is configured.
Change-Id: Ia91cb4aef9d15520b8b3402ec10e7b0a4355caeb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Of the 13 mainboards that implement mainboard_should_reset_usb() hook,
all but one do the same: Stop MRC from resetting USB when resuming
from S3 suspend.
This hook turns out is only here to facilitate a USB reset workaround
on samsung/stumpy for an old ChromeOS kernel which is no longer needed.
Drop the workaround, the hook, and headers no longer used.
roda/rv11/early_init.c is left with no useful code after this patch,
so drop it entirely from both bootblock and romstage.
Change-Id: Ib3a5a00c0a6b1528e39435784919223d16b3914e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Having these two functions public allow "asynchronous"
HECI command implementation.
Typically, these function can be use to implement an asynchronous
End-Of-Post.
BUG=b:268546941
BRANCH=firmware-brya-14505.B
TEST=Successful compilation for brya0
Change-Id: I7d029bb9af4b53f219018e459d17df9c1bd33fc1
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The internal GPP bridge to bus B is not used on MDN, so remove it.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4f95afd192c5b799b7a3e12650476b7933cdd118
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The default SPD size is set to 256 bytes, instead of 512 for
LPDDR4/DDR4 if not overridden by the mainboard Kconfig. This caused
the SMBus libraries to read only the lower half of the DIMM SPD on
protectli/vault_ehl. The lower half of the SPD passed to FSP causes
a bug in DIMM change detection, which relies on the CRC of the
manufacturer bytes in the upper half of the SPD (CRC of zero bytes
always gives zero so no change was assumed). Setting the DIMM SPD size
to 512 fixes it.
Setting the SPD size in SoC will also avoid such problems in the future
Elkhart Lake ports. Elkhart Lake supports only LPDDR4/DDR4 so providing
the correct default of 512 bytes is an obvious thing to do.
TEST=Boot Protectli VP2420 (vault_ehl) with different DIMMs and see
FSP is retraining the memory instead of doing the fastboot with old
DIMM data.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I998ed8781951034419cadc26c04ff1e0a124b267
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73933
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PCIE RP 9 on taeko is for eMMC.
Correct the comments to prevent confusion.
BUG=b:271003060
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ib49942b682d1817af9e8b4b61044aa170e18fea8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch renames all references of `top_of_ram` (TOM) in IA common
`basecode` module (for example: functions, variables, Kconfig,
Makefile and comments) with `ramtop` aka top_of_ram to make it more
meaningful and to avoid conflicts with Intel SA chipset TOM registers.
BUG=Able to build and boot google/rex with the same ~49ms savings
in place.
Change-Id: Icfe6300a8e4c5761064537fb256cfecbe2afb2d8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73881
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It seems like the hotplug enable might be doing more than just enabling
devices to be hot-plugged, so re-enable the feature for the SD card.
Removing it from SD increased resume time and may have caused reboot
issues for SD after resume.
This is a partial revert of CB:73512
BUG=b:273620322
TEST=See resume time go down on Skyrim
BRANCH=Skyrim
Change-Id: I4814d4377d0ba8a1e9b308853b3e02a4a27bd8d5
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Enable Frostflow platform to send the fuse SPL (security patch level)
command to the PSP.
BUG=b:274028833
BRANCH=none
TEST=FW_NAME="frostflow" emerge-skyrim coreboot chromeos-bootimage
Then get "PSP: SPL Fusing Update Requested." in the firmware log.
Change-Id: I6437d5324877702f2f8b4c69d4c850543e1b74be
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73884
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
To be consistent with other occurrences in soc/intel/common, remove the
return statements of weak void funtions since they are not generally
useful.
Found by the linter.
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Change-Id: I3fb8217cfcae65b5dc317458b59aa431f1ccdaef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The return statement at the end of the method is never reached. Remove
it. Also while at it, assign the return value of variant_board_sku()
to ski_id while the variable declaration and make it const.
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Change-Id: If05df8934f68ffec9ad21c88394055f71d618133
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Macros should not use a trailing semicolons. Remove those from
'LONG_DOWNTO8' aswell as 'LONG_DOWNTO16' and add them at places where
the macros are used.
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Change-Id: I5ba01bc09f9a2d9ecd54014e27ec0a24c7297412
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This will be tracked directly in the bug, so a code comment is not
needed.
BUG=263161283
TEST=none
BRANCH=Skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4d5af35762354c8825d30f813098547a7e009e35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73828
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Pre-RAM TPM logs use a separate define for the max number of logs. This
one fits into the 2 KiB region assigned to TPM_LOG in the CAR linker
script.
Change-Id: Idda08a33c4a29fcb50085ca93487585dedf11012
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Assign true/false instead of 1/0 to the valid_freq_divisor bool variable
in get_pstate_core_freq.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92d0eb029c55f80a2027ff6d404c63ed84282750
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
If the host supports CXL, get proximity domain info from FSP HOB. The
proximity domains may include both processor domains and CXL domains.
Add header definition for proximity domain.
Add CXL memory into memory map.
Change-Id: If3f856958a3e6ed3909240ee455bb639e487087f
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
DPR should not be configured for VTD devices of other stacks for
SPR-SP. Such processor(s) would be configured with
SOC_INTEL_MMAPVTD_ONLY_FOR_DPR.
Change-Id: Ib33b1b62f59a10d362c6585b1403490d4a1aedeb
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72616
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
... instead of ME base/limit if the processor is configured with
SOC_INTEL_HAS_NCMEM.
Change-Id: I95783cad1a2d5a3599d120ea0c98e2aa8703bdb4
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72615
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This soc utility function can set cmos flag to enforce
FSP MRC training.
Change-Id: I88004cbfdcbe8870726493576dfc31de4b6036a9
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
After calling FSP MemoryInit API, if there is an error, some FSPs
(such as SPR-SP FSP) is capable of generating FSP_ERROR_INFO_HOB.
Check existence of such a HOB and handle it accordingly.
Change-Id: Icb5c31daa223ba6b06ba1b2de4f8808e0b27899e
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
